,

TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection


SKU:
  1. Dimension: 25 x 19 x 10 (LxWxH)mm.
  2. Input interface: micro USB.
  3. Current Protection: Yes
  4. Charging mode: Linear charging.
  5. Current: 1A adjustable.
  6. Charge precision: 1.5%.
  7. Input voltage: 4.5V-5.5V.
  8. Full charge voltage: 4.2V.

  (Incl. GST)


Free Delivery above ₹499
Free Delivery
above ₹499
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Category: Battery Protection Board, Best Prices
Tags: Li-Ion Charger, Lithium Ion Battery Charger, TP4056 Charger, Battery Charger, tp4056, Best Prices

Note: This Product is available in two different variants of IC  ( TP4056 and XL 4056A,HW-107 ) with the same working we will ship it randomly.

This TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium-ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.

Furthermore, when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.

Manufactured under fully machinery processing. Each module is tested OK before shipment from Robu.in so it has high reliability for the best performance. In conclusion, it is special design for a single lithium battery charging. TP4056 Other features include the current monitor, under voltage lockout, automatic recharge, and two status pin to indicate charge termination and the presence of an input voltage.

Using the module:
  1. Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
  2. Connect cell to charge to B+/B- pads on the right-hand side of the module.
  3. A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
  4. Important! Disconnect load when charging
  5. The red LED indicates charging in progress, green LED indicates charging has finished.
  6. Never charge your battery at a rate greater than 1C.
NOTE:

1. Ampere meter can only be connected to a 5v input end of the module.
2. It is better than the charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, a current of 400mAh is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to the chip.
6. NO Reverse polarity.

We have 3 more such charging boards employing same TP4056 chip which are available at Robu.in and they are different according to the onboard USB port and current protection they provide,

1) TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB
2) TP4056 1A Li-ion lithium Battery Charging Module – Mini USB
3) TP4056 1A Li-ion lithium Battery Charging Module with Current Protection – Mini USB

Features :

  1. Led indicator: red is charging Green is fully charged.
  2. Current Protection: Yes
  3. Inversed polarity: NO.
  4. Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy.
  5. Fully machinery automated processing, all patch parts manufacturing.

Package Includes :

1 x TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection

Based on 0 reviews

0.0 overall
78
12
1
1
1

Add a review

  1. Kiran Sarode (verified owner)

    Best way to charge 18650 li battery thank yyou

    Kiran Sarode

  2. elecobot.projects (verified owner)

    Good quality product.

    elecobot.projects

  3. Ramji Patel (verified owner)

    The TP4056 is the best choice for charging the Li-ion and Li-Po batteries’. It has Micro-B type USB connector so one can easily charge the battery without any other external charger.

    Ramji Patel

  4. varun.kamra22 (verified owner)

    Brand new TP4056 received and it works.

    varun.kamra22

  5. Priyanshu Maurya (verified owner)

    Good quality

    Priyanshu Maurya

  6. GAUTAM JANGID (verified owner)

    Very good with reasonable price

    GAUTAM JANGID

  7. Nivesh Prasanth (verified owner)

    Good quality and packing..

    Nivesh Prasanth

  8. panditmohanrao (verified owner)

    working as a charm brought two but one heats up quickly other has decent temprature . overall its doing its job

    panditmohanrao

  9. Sidram Landage (verified owner)

    Smaller size and user friendly.

    Sidram Landage

  10. Sidram Landage (verified owner)

    Very very smaller size and user friendly.

    Sidram Landage

  11. Roopchandra Ahirwar (verified owner)

    Very good products

    Roopchandra Ahirwar

  12. vivekkumarchandra (verified owner)

    High quality pcb works like a charm

    vivekkumarchandra

  13. Ishan (verified owner)

    Great product with good pcb quality..charges my batteries pretty good as it is supposed to

    Ishan

  14. Rahul Mishra (verified owner)

    Very good !! But its main ic (4056) heat in
    Medium quantity during battery charging!!

    Rahul Mishra

  15. Gautam Sahu (verified owner)

    ok not good nor bad,

    Gautam Sahu

  16. Gautam Sahu (verified owner)

    Good product in this price range but shipping charges are bit higher.

    Gautam Sahu

  17. azimee93 (verified owner)

    I have orderd 15 pics for my college project, it stops charge at 4.12V to 4.2 volt ,so that overheating of battery or damage are now zero chance. Great working

    azimee93

  18. prathampandey3172 (verified owner)

    Working great!

    prathampandey3172

  19. manab87 (verified owner)

    Best lithium ion battery charging and protection module available in market. And in Robu.in makes it cheap and best module in market.

    manab87

  20. Aditya Enterprises (verified owner)

    good product good price, Highly recommended.

    Aditya Enterprises

  21. Ganesh

    Great Product go For it.

    Ganesh

  22. Satyam (verified owner)

    I ordered 5 piece and i got 1 piece defective

    Satyam

  23. sahaliman44 (verified owner)

    Good

    sahaliman44

  24. snsontakke1 (verified owner)

    Nice to have e com website like you very reasonable prices compared to other keep it up

    snsontakke1

  25. Ashok Bhadana (verified owner)

    good

    Ashok Bhadana

  26. Ayush verma

    This gives in very low price so this is ???

    Ayush verma

  27. adilahmed786.akhan (verified owner)

    original product

    adilahmed786.akhan

  28. Amit Keskar (verified owner)

    Nice packaging and Good quality board …. Works perfectly.

    Amit Keskar

  29. sikendra kumar

    good

    sikendra kumar

  30. Raman B (verified owner)

    work perfectly

    Raman B

  31. mitalighosh.19.mid (verified owner)

    Very good product and cheaper than any other seller.

    mitalighosh.19.mid

  32. aijaz.vankani (verified owner)

    Good product.

    aijaz.vankani

  33. adityasrivastav0739 (verified owner)

    बहुत अच्छी क्वालिटी का है SMD कंपोनेंट की साइज और PCB की मोटाई से ये मॉड्यूल काफी मजबूत लगता है

    adityasrivastav0739

  34. Sunil Kumar (verified owner)

    Good product and packing shipping very fast

    Sunil Kumar

  35. Rajeev Hansda (verified owner)

    No defective board
    cheap price than Amazon Flipkart
    Packaging was very nice bubble wrap individual pouch and everything
    fast delivery
    I’m very satisfied with Robu.in

    Rajeev Hansda

  36. narayan.bangaiyya73

    Best

    narayan.bangaiyya73

  37. Suraj

    Battery charging

    Suraj

  38. Aditya Singh sisodiya

    this is best app

    Aditya Singh sisodiya

  39. vultureakhil (verified owner)

    good quality and cheap price, go blind.

    vultureakhil

  40. sudeep oreya (verified owner)

    Best charging module for single lithium ion battery. Robu provided me at cheap price, and order was well packaged.

    sudeep oreya

  41. bhanirojh4 (verified owner)

    heating problem normal

    bhanirojh4

  42. gopinathkundu67 (verified owner)

    a good charging and protection board for lithium cells

    gopinathkundu67

  43. rtslucky786 (verified owner)

    Best in the segments

    rtslucky786

  44. ADITH A S (verified owner)

    good

    ADITH A S

  45. tsood751

    awesome

    tsood751

  46. nainar

    good

    nainar

  47. debanshub7 (verified owner)

    does its job perfectly

    debanshub7

  48. gokukgoks008 (verified owner)

    Good

    gokukgoks008

  49. Robert Khan (verified owner)

    work fine, and deliver very fast

    Robert Khan

  50. Robert Khan (verified owner)

    work fine

    Robert Khan

  51. arshitagarwal99933 (verified owner)

    Highly competitive pricing, fast shipping and genuine products. What else anyone needs.

    arshitagarwal99933

  52. singhjaskirat1230 (verified owner)

    I love this module good quality I ordered it on 10 June 9:00 am and it was delivered by 12 june

    singhjaskirat1230

  53. SHAHZAD SHAIKH (verified owner)

    i am very happy very fast delivery mera order 24 ghante me deliver kar diya gaya thanx robu thanx bluedart

    SHAHZAD SHAIKH

  54. Valmiki Nayak (verified owner)

    Tiny little board but does the job nicely. I purchased 4 units. So far none have failed. All working well.

    Valmiki Nayak

  55. Nishant Luthra (verified owner)

    Nice product

    Nishant Luthra

  56. rambabu

    ok

    rambabu

  57. Akshay Chougule (verified owner)

    heating issue while charging.

    Akshay Chougule

  58. samroberto03 (verified owner)

    This is good changing module for li-ion battery. But drawback is that it won’t charge the battery to 4.2v Instead it will charge it to 4.16v

    samroberto03

  59. AMIT SHARMA (verified owner)

    good product in good price bracket

    AMIT SHARMA

  60. sk1020csvp

    Useful Product

    sk1020csvp

  61. AJAI KUMAR S (verified owner)

    It is soo cheap(because it’s TC4056(TC- chinese) and not TP4056) that I bought a lot of them. you should provide only 30% charge current to the capacity of the battery or else it will heat up( for 2000mah battery use 500mah charger)

    AJAI KUMAR S

  62. Sayanik Mandal (verified owner)

    Superb item must buy but the manufacture and origin of the product is china as I can show the is TC4056. But ok very chief price must buy from robu.in.

    Sayanik Mandal

  63. chetanya Pareek

    very helpful

    chetanya Pareek

  64. mupparamshyam (verified owner)

    value for money product, very low price and useful

    mupparamshyam

  65. Shivraj Jangada (verified owner)

    good product

    Shivraj Jangada

  66. venky.r.81 (verified owner)

    I have bought 10 of these, and have used 4 out of it. These are very good. Thanks for @ 29Rs Robu.in

    venky.r.81

  67. badol das

    good

    badol das

  68. kewalharia (verified owner)

    Works great as expected

    kewalharia

  69. nazeerahmed.m (verified owner)

    Good product, good packing, good price

    nazeerahmed.m

  70. ojasvibissa (verified owner)

    Great product in this price range,thanks robu

    ojasvibissa

  71. shubhendu_pal (verified owner)

    Really good one. Always serves my purpose.

    shubhendu_pal

  72. vinoypaulose004 (verified owner)

    Definitely worth the prize

    vinoypaulose004

  73. omprakash.unique (verified owner)

    Everything goes well.

    omprakash.unique

  74. sanjay thummar (verified owner)

    Good service.

    sanjay thummar

  75. neveralegend (verified owner)

    IT IS AWESOME VORRECT DELIVERY AND EXACT SIZE

    neveralegend

  76. jitendra.pandit25 (verified owner)

    Item is Good as Expected.

    jitendra.pandit25

  77. Kushagra Kasliwal (verified owner)

    Product received as described. Shipment was super fast.

    Kushagra Kasliwal

  78. Parthapratim Sarmah (verified owner)

    Good product

    Parthapratim Sarmah

  79. Parthapratim Sarmah (verified owner)

    Very accurate voltage limit 4.20v. Good product.

    Parthapratim Sarmah

  80. Firoz (verified owner)

    Good product, fast shipping

    Firoz

  81. Baji firos (verified owner)

    Good product, Fast shipping

    Baji firos

  82. Parthapratim Sarmah (verified owner)

    Perfect.Output voltage is 4.2v which is very accurate.

    Parthapratim Sarmah

  83. electrocentre (verified owner)

    Works perfectly. Limits Charge current and cutoff voltages as specified. LED indicator works. Delivery is superfast. Reasonably priced. Go for this

    electrocentre

  84. N. Ali (verified owner)

    Very good Product. Packing is also very good. Value for money.

    N. Ali

  85. Anand Ranjith Kannan (verified owner)

    I just received this today afternoon…and i came to notice the charge controller IC is not TP4056 and is a TC4056…means the chip is made in china..not the real ST product….

    Main question..will it work?
    Yeah damn perfect i say…charge current was 0.99A when my cell was at 3.5V..and stops charging when reaching 4.15V.

    please keep in mind that when charging at 1A constant, the board will heat up( for me its like 60-70 degrees) but as the cell vtg increase, charge current decreases hence the heating will fall away.
    The board has two LED, Red for charging and Blue for notification of the cell being fully charged.

    regardless of charging or not, you can get cell output from the board.

    Anand Ranjith Kannan

  86. JL Ruatpuia (verified owner)

    Good product. Good package and fast delivery

    JL Ruatpuia

  87. Shijil Thachilodi (verified owner)

    received faulty item.
    from a 3.2v battery it outputs only 1.2v..
    I had another board with me, it works fine, but the one received from robu is not working properly.

    Shijil Thachilodi

  88. Suresh (verified owner)

    Good Product,
    charge only one battery at time.

    Suresh

  89. Avin Raikwar (verified owner)

    Good charger buy charging battery to only 4.1 v not 4.2 volt .
    External heatsink is needed for bigger battery.

    Avin Raikwar

  90. Aditya (verified owner)

    Nice

    Aditya

  91. Aditya (verified owner)

    God item

    Aditya

  92. Shafeek Bin Ashraf (verified owner)

    Good quality,good packing. Reached on time!!.

    Shafeek Bin Ashraf

  93. Prabakaran (verified owner)

    That ok it’s really works

    Prabakaran

Questions and answers of the customers

    Can I charge two 3.7v 1250mah batteries connected ... Read more
  1. 0 votes
    Q Can I charge two 3.7v 1250mah batteries connected in series with this module? answer now
    Asked by Anonymous user on March 24, 2023 6:12 am
    A No, only suggested single-cell charging.
  2. What is the output from battery after full charge?... Read more
  3. 0 votes
    Q What is the output from battery after full charge? how much volts ? answer now
    Asked by Anonymous user on June 28, 2022 6:03 pm
    A This is a 1A Li-Ion Battery Charging Board with Cu... Read more
  4. Does it have over drain protection?
  5. 0 votes
    Q Does it have over drain protection? answer now
    Asked by Anonymous user on June 27, 2021 7:08 pm
    A Yes, it include over drain protection 
  6. Can this be used to charge 1S LiPo?
  7. 0 votes
    Q Can this be used to charge 1S LiPo? answer now
    Asked by Anonymous user on June 18, 2021 3:26 am
    A Yes, it can be used to charge 1S LiPo cells . 
  8. Why we should disconnect load when charging the ba... Read more
  9. 0 votes
    Q Why we should disconnect load when charging the battery? I wanted a module as a UPS (when power s...... Read more answer now
    Asked by Anonymous user on May 7, 2021 4:46 pm
    A When using the TP4056 1A Li-Ion Battery Charging ... Read more
  10. Does this item also protects short circuit?
  11. 0 votes
    Q Does this item also protects short circuit? answer now
    Asked by Anonymous user on October 20, 2020 5:46 pm
    A no
  12. WILL THIS WORK PLS ANY ONE SAY!!!!!!!! I had i max... Read more
  13. 0 votes
    Q WILL THIS WORK PLS ANY ONE SAY!!!!!!!! I had i max b3 charger in which the TP4056A IC were burnt ...... Read more answer now
    Asked by Anonymous user on September 29, 2020 1:54 pm
    A if you connect 3 modules with batter in series to ... Read more
  14. can i charge 3.7v 1400 mah phone battery
  15. 0 votes
    Q can i charge 3.7v 1400 mah phone battery answer now
    Asked by Anonymous user on May 18, 2020 6:04 am
    A of course you can
    A just be careful about the polarity and input volta... Read more
  16. Can i use this to charge 18650 lithium ion batteri... Read more
  17. 0 votes
    Q Can i use this to charge 18650 lithium ion batteries? Someone please reply! answer now
    Asked by Anonymous user on March 3, 2020 2:04 pm
    A Yes you can. Checkout this video https://www.youtu... Read more
    A yes you can do that. it is specally made for this ... Read more
Only registered users are eligible to enter questions
Country Of Origin: China