ICL7611DCPA+-ANALOG DEVICES-ICL7611DCPA+-Operational Amplifier, Rail to Rail Input, 1 Channels, 1.4 MHz, 1.6 V/µs, ± 1V to ± 8V, 2V to 16V
.The ICL7611DCPA+ is a monolithic low power CMOS single operational amplifier (op-amp) in 8 pin DIP package. It combines ultra low input current with low power operation over a wide supply voltage range. This op-amp operates from ±1V to ±8V power supplies or from single supplies from 2V to 16V with pin selectable quiescent currents of 10μA, 100μA or 1000μA per amplifier. The CMOS outputs swing to within millivolts of supply voltages. It is used in application where input bias and offset currents are critical. A low noise current of 0.01pA√Hz and an input impedance of 10^12ohm ensure optimum performance with very high source impedances in applications such as pH meters and photodiode amplifiers. The ICL7611D is used in battery powered instruments, low leakage amplifiers, long time constant integrators, low frequency active filters, hearing aids and microphone amplifiers, picoammeters and low droop rate sample/hold amplifiers.
Note: Images for reference only.
Specifications:
No. of Channels:: 1Channels
Gain Bandwidth Product:: 1.4MHz
Slew Rate Typ:: 1.6V/µs
Supply Voltage Range:: ± 1V to ± 8V, 2V to 16V
IC Case / Package:: DIP
No. of Pins:: 8Pins
Amplifier Type:: CMOS
Rail to Rail:: Rail – Rail Input (RRI)
Input Offset Voltage:: 15mV
Input Bias Current:: 1pA
IC Mounting:: Through Hole
Operating Temperature Min:: 0°C
Operating Temperature Max:: 70°C
For detailed specifications, please refer to datasheet in Attachments.
Package Includes:
1 x ICL7611DCPA+-ANALOG DEVICES-ICL7611DCPA+-Operational Amplifier, Rail to Rail Input, 1 Channels, 1.4 MHz, 1.6 V/µs, ± 1V to ± 8V, 2V to 16V
There are no reviews yet.