Uno Learning kit for Arduino


SKU:
  1. All-in-one kit, a great starter kit for learning coding.
  2. Microcontroller ATmega328 (SMD) – Interface CH340G
  3. Operating Voltage: 5V
  4. Input Voltage (recommended): 7-12V
  5. Input Voltage (limits): 5-20V
  6. Digital I / O Pins 14 (of which 6 provide PWM output)
  7. Analog Input Pins: 6

  (Incl. GST)


Free Delivery above ₹499
Free Delivery
above ₹499
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Category: Kits compatible with Arduino
Tags: Arduino, Development Board, Uno, arduino kit, Microcontroller, Arduino UNO, Robot Brain, Arduino Kit for Beginner, Arduino Learning Kit

Whether you are a beginner or already have experience with Arduino under your belt, This Uno Learning kit for Arduino by ROBU.IN will be a fun way to expand your knowledge.

Building some creative and simple projects is a great way to walk through coding and basic electronic circuits knowledge.

This Arduino Learning kit includes everything you need to get started with electronics using an Arduino and a lot of things that will take you from a beginner to an enthusiast. It includes all of the basics: an Arduino UNO board, breadboard, cables, LEDs, resistors, and pushbutton switches.

Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3. It is assembled with the CH340 USB to Serial converter chip, instead of using an Atmega16U2 chip.

We have used plenty of these low-cost Arduino boards with CH340 chips, and have found them to work perfectly. The only time the CH340 chip is used is during programming and when using the serial output of the USB port. During normal operation, this board is identical to the more expensive version without CH340 chip.

 

Arduino Kits 3

 


Specifications and Features :

  1. All-in-one kit, a great starter kit for learning to code.
  2. Microcontroller ATmega328 (SMD) – Interface CH340G
  3. Operating Voltage: 5V
  4. Input Voltage (recommended): 7-12V
  5. Input Voltage (limits): 5-20V
  6. Digital I / O Pins 14 (of which 6 provide PWM output)
  7. Analog Input Pins: 6
  8. DC Current per I Pin: 40 mA
  9. DC Current for 3.3V Pin: 50 mA
  10. Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
  11. SRAM: 2 KB (ATmega328)
  12. EEPROM: 1 KB (ATmega328)
  13. Clock Speed: 16 MHz

Package Includes :

1 × UNO R3 CH340.

1× USB CABLE.

1 × 400 holes breadboard.

5 × LED lights red.

5× LED lights green.

5 × LED lights yellow.

10 × Resistor 220 ohm.

10 × Resistor 1K.

10× Resistor 10K.

10 × Resistor 100K.

2 × 5mm 5528 LDR Photoresistor.

2 × Red Caps.

2× White Caps.

2 ×Blue Caps.

6 × Buttons.

1 × 9V Battery Connector.

2 × 1*40pin 2.54mm Pin Header.

20pin Male to Male Dupont Cable.

Based on 0 reviews

0.0 overall
4
4
0
0
0

Add a review

  1. Saudken52 (verified owner)

    the kit has everything you’ll need to start learning Arduino.
    do note that this is not the original Arduino Uno (but that’s not a problem, it still works perfectly).
    the only small issue I faced is that the bread board is too small and sometimes the jumper wires don’t fit in properly.
    apart from that this should be enough for you to get going with Arduino

    Saudken52

  2. shashannkaggarwal (verified owner)

    Overall the kit is good, but could have been better if the arduino board was with a removable micro-controller chip.

    shashannkaggarwal

  3. maneesh085 (verified owner)

    Pros
    – Nice bundle and well packed . Good Arduino compatible board. On time delivery .
    Con
    – a Female -Female jumper cables are really required in this pack.

    maneesh085

  4. Kevin (verified owner)

    Reliable

    Kevin

  5. Swati Mishra (verified owner)

    very good

    Swati Mishra

  6. Karuna Soft (verified owner)

    I was so excited to buy this product but as soon as I received the box, I felt disappointed by the by Arduino board. Please go separately for Arduino board with a pluggable microcontroller like this https://robu.in/product/arduino-uno-r3/.

    Karuna Soft

  7. mayurkumarchauhan19@gmail.com

    so so ok.

    mayurkumarchauhan19@gmail.com

  8. Yog Kumar

    Looks good

    Yog Kumar

Questions and answers of the customers

    Do I need to install any special drivers for this?... Read more
  1. 0 votes
    Q Do I need to install any special drivers for this? or can i start playing with it as soon as I pl...... Read more answer now
    Asked by Anonymous user on October 2, 2020 4:49 am
    A You need to install CH340G drivers.
Only registered users are eligible to enter questions
Country Of Origin: China