Wireless
Showing all 17 results
-
Other ESP WIFI Modules
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
SKU:- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
SKU: n/a -
xBee Zigbee modules
Zigbee XBee Module S2C 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004
SKU:- Integrated, Wire Antenna
- Interoperable with other ZigBee-compliant devices
- Programmable versions with onboard microprocessor enable custom ZigBee application development
- Supports binding and multicasting for easy integration into a home automation platform
- Data Rate: RF 250 Kbps, Serial up to 1 Mbps
- Range: Indoor 200 ft (60 m), Outdoor (LOS) 4000 ft (1200 m)
- Transmit Power: 3.1 mW (+5 dBm)
- Channels: 16 channels
SKU: n/a -
Bluetooth and NRF Modules
HC-05 TTL Bluetooth Transceiver Module (Without Button)
SKU:- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution
- Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes
- Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support
- Incredible small size with 3.3V input, and RoHS Compliant
- UART interface and with baud rate setup function
SKU: n/a -
Bluetooth and NRF Modules
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
SKU:- Bluetooth Protocol: Bluetooth Specification V4.0 BLE
- USB Protocol: USB V2.0
- Operating Frequency: 2.4GHz ISM band
- Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
- Transmitting Power: ≤4dBm
- Sensitivity: ≤-84dBm at 0.1% BER
- It’s easy to use and completely encapsulated.
- You can set it as slave or master.
- You can use AT command set the baud rate.
SKU: n/a -
Other ESP WIFI Modules
WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board
SKU:- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0)
- Analog Input Pins: 1
- Flash Memory: 4MB
- On-Board Switching Power Supply:
- Input Voltage Range: 9V to 12V
- Output: 5V at 1A Max
SKU: n/a -
Ai Thinker ESP Modules, LORA Module
Ai Thinker LoRa Series Ra-02 Spread Spectrum Wireless Module
SKU:- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
SKU: n/a -
xBee Zigbee modules
Zigbee XBee Pro S2C 802.15.4 Module 63mW 3Km+ 3.2dBi Antenna
SKU:- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: n/a -
xBee Zigbee modules
XBee Pro S2C 63mW 802.15.4 Module without Antenna
SKU:- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: n/a -
Other ESP WIFI Modules
ESP-WROOM-32 Wifi Bluetooth Combo Module
SKU:- CPU and Memory: Xtensa® 32-bit LX6 Dual-core processor, up to 600 DMIPS.
- 448 KByte ROM
- 520 KByte SRAM
- 16 KByte SRAM in RTC.
- QSPI can connect up to 4* Flash/SRAM, each flash should be less than 16 Mbytes.
- Supply Voltage: 3V~3.6V
SKU: n/a -
Shield for Arduino
XBee Shield V03 Module Wireless Control
SKU:- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB2.0 protocol.
SKU: n/a -
IR and RF Transmitters and Receivers
HC-11 CC1101 433MHz Wireless Transceiver RF Serial UART Module
SKU:- 433MHz operation
- Ultra-low power consumption (3.5mA or 22mA depending on mode) with sleep option (80μA).
- 10dBm output power and high sensitivity providing long range in the open environment.
- 3V-6V operating voltage.
- Serial pass-through mode to replace the serial cable (half duplex).
- IO pass-through modes.
SKU: n/a -
xBee Zigbee modules
Digi XBee3 2.4GHz ZB3.0 PCB Antenna
SKU:- Serial Data Interface: Uart, Spi, I2c.
- Configuration Method:Â API Or At Commands, Local Or Over-the-air.
- Frequency Band: ISM 2.4 GHz.
- Form Factor: Micro, Through-hole, Surface Mount.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs.
- Digital I/o: 15.
SKU: n/a -
xBee Zigbee modules
Digi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna
SKU:- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Configuration Method:Â API Or At Commands, Local Or Over-the-air
- Frequency Band: ISM 2.4 GHz
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum)
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15.
SKU: n/a -
Shield for Arduino
Cytron XBee Shield
SKU:-
Mounts directly onto your Arduino
-
DIN and DOUT pins of XBee can be connected to either the USB’s UART pins or another digital pin on the Arduino (D0, D1, D2, D3, D8, D9, D10, D11)
-
3.3V power regulation and proper level shifting on-board communication between 5V and 3.3V
-
Extra 0.1″ spaced prototyping holes
-
Reset button brought out to shield
-
Power, DIN, DOUT, RSSI, and DIO5 indicator LEDs
SKU: n/a -
-
-
LORA Module
Wireless Transmitter 433Mhz, Lora Shield for Leonardo,, UNO, Mega2560,, Duemilanove, Due
SKU:- Compatible with 3.3v or 5v I/O Arduino Board.
- Frequency Band:Â Â 433 MHZ (Pre-configure in factory)
- Low power consumption
- Compatible with Arduino Leonardo, Uno, Mega2560, DUE
- External Antenna via SMA Jack
SKU: n/a -
Shield for Arduino
XBee IO Expansion Shield – XBEE 2
SKU:- Expand 14 digital IO interface (12 steering gear interface)and power
- Six analog IO interfaces and power
- One digital port interface for external power supply terminals
- Digital port external power supply and on-board electrical automatic switch
- One external power input terminals and one input needle
- RS485 interface (D0-RX, D1-TX, D2-EN)
- IIC/the I2C/TWI interface (A4-SDA, A5-SCL)
- SD card module interface
SKU: n/a
