Wifi Board
Showing all 9 results
-
-
Other ESP WIFI Modules
ESP8266 NodeMCU CP2102 Board
SKU:- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
SKU: n/a -
Best Prices, Other ESP WIFI Modules
NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board
SKU:- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
SKU: n/a -
Best Prices, IR and RF Transmitters and Receivers
M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module
Best Prices, IR and RF Transmitters and ReceiversM177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module
SKU:- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Particularly suitable for industrial control applications.
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
- Standard DIP Pitch Interface for embedded applications
SKU: n/a -
Best Prices, IR and RF Transmitters and Receivers
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
Best Prices, IR and RF Transmitters and Receivers2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
SKU:- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- Receive Mode Current(peak): 45mA
- It uses 2.4GHz global open ISM band, with license free.
- SPI interface facilitates the communication with MCU I/O port.
SKU: n/a -
Other ESP WIFI Modules
NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board
SKU:- The perfect solution for breaking out the pins from Lua V3 Nodemcu.
- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Convenient to connect with peripheral modules
- Onboard 5V / 1A DC-DC step-down converter circuit
- Onboard power indicator
- With DC power jack 6-24V.
SKU: n/a -
Other ESP WIFI Modules
ESP8266 Serial Port To Wi-Fi Module, FL-M1S
SKU:- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor
SKU: n/a -
Relay Modules
ESP8266 WiFi 5V 1 Channel Relay Module
SKU:- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: n/a