Stepper Motor
Showing all 33 results
-
Best Prices, Stepper Motor Drivers
A4988 driver Stepper Motor Driver- Normal Quality
SKU:- Supply Voltage : 8-35 VDC.
- Current : 1.0A Â (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
SKU: n/a -
Best Prices, Stepper Motor Drivers
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
Best Prices, Stepper Motor DriversTB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
SKU:- Input Current: 0~5A
- Output Current: 0.5~4.0A
- Control Signal: 3.3~24V
- Power (MAX): 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
SKU: n/a -
-
3D Printer Stepper Motors, Stepper Motors
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver – Good Quality
3D Printer Stepper Motors, Stepper Motors28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver – Good Quality
SKU:- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
SKU: n/a -
Best Prices, Stepper Motor Drivers
A4988 driver Stepper Motor Driver- Good Quality
SKU:- Supply Voltage : 8-35 VDC.
- Current : 1.0A Â (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
SKU: n/a -
-
-
-
-
Stepper Motor Drivers
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
SKU:- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: n/a -
Stepper Motor Drivers
TB6600 Stepper Motor Driver Controller 8~50V 4.5A
SKU:- Supply Voltage: 8V – 50V DC (36V recommended).
- Output current: 0.3A – 4.5A (peak value of 5A).
- Micro Step: 1, 2, 8, 16.
- Maximum PWM frequency:Â 200kHz.
- Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
- Operating temperature: -10 to + 45 ° С.
SKU: n/a -
-
Stepper Motor Drivers
ULN2003A Driver Module Stepper Motor Driver
SKU:- 5-12V power supply
- 4-way signal indicator
- Chip all the pins have Input leads Mounted for easy connection to use
- XH-5P socket can be connected directly 28BYJ-48 Model stepper motor
- Dimensions: 32 x 18 x 11mm (LxWxH)
- Weight: 3 gm
SKU: n/a -
-
-
-
Pro-range Stepper Motors
PRO-RANGE NEMA23 PR57HS112-3004-03 30.61 kg-cm Hybrid Bipolar Stepper Motor -Round Type Shaft
Pro-range Stepper MotorsPRO-RANGE NEMA23 PR57HS112-3004-03 30.61 kg-cm Hybrid Bipolar Stepper Motor -Round Type Shaft
SKU:- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Motor Type: Bipolar
- Shaft Type: Round Type Shaft
- Holding Torque: 306 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 8 mm
SKU: n/a -
3D Printer Stepper Motors, Nema 23 Stepper Motors
JK57HS112-3004-03 NEMA23 30.61 kg-cm Hybrid Bipolar Stepper Motor – D-Type Shaft
3D Printer Stepper Motors, Nema 23 Stepper MotorsJK57HS112-3004-03 NEMA23 30.61 kg-cm Hybrid Bipolar Stepper Motor – D-Type Shaft
SKU:- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Motor Typr: Bipolar
- Holding Torque: 306 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 8 mm
SKU: n/a -
-
Nema 11 Stepper Motors
28HS51-0674JX5.18 NEMA11 1.2 Kg-cm Stepper Motor with Planetary Gearbox – D-Type Shaft
Nema 11 Stepper Motors28HS51-0674JX5.18 NEMA11 1.2 Kg-cm Stepper Motor with Planetary Gearbox – D-Type Shaft
SKU:- Step Angle: 1.8°
- Holding Torque: 1.2 kg-cm
- Supply Current (A): 0.67
- Winding Type: Bipolar
- No. of Leads: 4
- Inductance: 7.3 mH/Phase
- Resistance: 9.2 Ω/phase
- Rotor Inertia: 18 gm-cm2
- Weight (gm): 272
- Shaft Diameter (mm): 6-(round side), 5-(flat side)
SKU: n/a -
3D Printer Stepper Motors, Nema 17 Stepper Motors
MakerBase MKS Closed Loop Nema 17 SERVO42 Motor with Adapter for 3D Printers (Without Display) V1.1
3D Printer Stepper Motors, Nema 17 Stepper MotorsMakerBase MKS Closed Loop Nema 17 SERVO42 Motor with Adapter for 3D Printers (Without Display) V1.1
SKU:- Model: MKS SERVO42A V1.1
- Input voltage: 12V-24V
- Peak output current: +-2A
- Closed-loop feedback frequency: 6kHz
- Precision: under 0.1125 degree
- Micro stepping: 16/32/64/128/256 (Default16)
- Step Angle: 22.5° (Default) / 11.25° / 5.625° / 2.815° / 1.40625°
SKU: n/a -
Nema 23 Stepper Motors, Refurbished, Refurbished & Partial Working, Refurbished Motors | Drivers | Pumps | Actuators
Refurbished – JK57HS112-3004-17F NEMA23 30.61 kg-cm Hybrid Stepper Motor – D-Type Shaft
Nema 23 Stepper Motors, Refurbished, Refurbished & Partial Working, Refurbished Motors | Drivers | Pumps | ActuatorsRefurbished – JK57HS112-3004-17F NEMA23 30.61 kg-cm Hybrid Stepper Motor – D-Type Shaft
SKU:- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Holding Torque: 306 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 6.35 mm
SKU: n/a