Olimex
Showing all 8 results
-
Shield for Arduino
SHIELD-EKG-EMG
SKU:- Stackable connectors – up to 6 channels can be stacked and wired to A0-A6 analogue inputs
- Calibration signal generation by D4/D9 digital output
- Precise trimmer potentiometer for calibration (all boards are shipped completely assembled, tested and calibrated so that you don’t have to do this unless you want to see how things works)
- Input connector for standard or active electrodes
- Works with both 3.3V and 5V Arduino boards
SKU: n/a -
PIC Development board
Olimex PIC32-PINGUINO-OTG ARDUINO like PIC32MX440F256H USB-OTG
SKU:- PIC32MX440F256H 80 Mhz microcontroller 256KB Flash 32KB RAM
- DC power supply allows power supply voltage from 9 to 30V DC
- Carefully selected, all of the components work reliably in the INDUSTRIAL temperature range -25+85C.
- ULTRA LOW POWER voltage regulators and the consumption is only a few microamps
- microSD card for data logging
- Allows RTC – Real Time Clock.
- NOISE IMMUNE design.
SKU: n/a -
Other ESP WIFI Modules
Olimex ESP8266 EVB-BAT
SKU:- Includes MOD-WIFI-ESP8266-DEV
- Relay 10A/250VAC (15A/120VAC 15A/24VDC) with connector and status LED
- Big button for easier access to UART mode
- LiPo battery connector with built-in LiPo charger and status LEDs
- Step up converter
- Power jack for +5V external power supply
- UEXT connector
- 20-pin connector CON1 with ESP8266’s signals
- PCB dimensions: (2.0 x 2.2)” ~ (51 x 57)mm
SKU: n/a -
Other ESP WIFI Modules
Olimex ESP8266-EVB
SKU:- Includes MOD-WIFI-ESP8266-DEV
- Relay 220VAC/10A with connector and status LED
- Big button for easier access to UART mode
- Power jack for +5V external power supply
- UEXT connector
- The row of 16 pinholes at 0.1″ step with all ESP8266 signals accessible; male-male 16-pin connector included
- 4 mounting holes
SKU: n/a -
PIC Development board
Olimex PIC32-PINGUINO-MICRO ARDUINO like PIC32MX440F256H USB OTG
SKU:- PIC32MX440F256H 80 Mhz microcontroller 256KB Flash 32KB RAM
- MicroSD card for data logging
- UEXT connector which allows many existing modules like RF, ZIGBEE, GSM, GPS to be connected
- Two LEDs
- One BUTTON
- RESET button
- A Mini USB connector is used, which is common and used in most cell phones, so you do not have to buy other cables
- All PIC ports available on 0.1″ connectors
SKU: n/a -
ARM Microcontroller
Olimex OLIMEXINO-STM32 ARDUINO/MAPLE like Board with STM32F103RBT60
SKU:- STM32F103RBT6 microcontroller
- UEXT connector which allows many existing modules like RF, ZIGBEE, GSM, GPS to be connected
- Allows RTC – Real Time Clock.
- CAN with driver allows automotive applications
- micoSD-card for data logging
- NOISE IMMUNE design.
- A mini USB connector is used, which is common.
- 4 mount holes make board attachment easier.
SKU: n/a -
