Microcontroller
Showing all 36 results
-
Best Prices, Boards Compatible with Arduino
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
Best Prices, Boards Compatible with ArduinoUno R3 CH340G ATmega328p Development Board Compatible with Arduino
SKU:- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Best Prices, Boards Compatible with Arduino
Nano Board R3 with CH340 Chip Mini-USB Port compatible with Arduino (Unsoldered)
Best Prices, Boards Compatible with ArduinoNano Board R3 with CH340 Chip Mini-USB Port compatible with Arduino (Unsoldered)
SKU:- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- Input Port: USB MINI
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: n/a -
Best Prices, Boards Compatible with Arduino
Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
Best Prices, Boards Compatible with ArduinoNano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
SKU:- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Boards Compatible with Arduino
Nano R3 W/O USB Cable Compatible with Arduino (Soldered)
SKU:- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel MEGA328PB-U (Nano)
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Boards Compatible with Arduino
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
Boards Compatible with ArduinoNano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
SKU:- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Boards Compatible with Arduino
Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
Boards Compatible with ArduinoNano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
SKU:- Operating Voltage (logic level): 5V
- With Mini USB
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Boards Compatible with Arduino
UNO R3 CH340G ATMega328P compatible with arduino + Cable
SKU:- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Best Prices, Boards Compatible with Arduino
Uno R3 Board without Cable compatible with Arduino
SKU:- Supported by Arduino IDE
- Operating Voltage: 5 V
- Input Voltage: 7 to 12 V
- Digital I/O pins: 14
- PWM Pins: 6
- Analog Input pins: 6
- Flash Memory: 32 KB (0.5 KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
SKU: n/a -
Best Prices, Kits compatible with Arduino
Arduino Uno R3 Beginners Kit
SKU:- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by Robu.in.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
SKU: n/a -
Boards Compatible with Arduino
Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
Boards Compatible with ArduinoUno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
SKU:- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Micro-controller : ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Boards Compatible with Arduino
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
SKU:- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Best Prices, Kits compatible with Arduino
Advanced Kit for Arduino
SKU:- All-in-one kit, a great starter kit for learning to code.
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
SKU: n/a -
Kits compatible with Arduino
Uno Learning kit for Arduino
SKU:- All-in-one kit, a great starter kit for learning coding.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
8-bit Microcontrollers IC
AT89S52-24PU DIP-40 Microcontroller
SKU:- Package/Case: DIP-40
- 8K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 256 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Three 16-bit Timer/Counters
- Eight Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
SKU: n/a -
-
Beagle Board
BeagleBone Black REV C
SKU:- Sitara AM3358BZCZ100 ARM Cortex-A8 32-Bit RISC microprocessor, up to 1GHz
- Onboard HDMI to connect directly to TVs and monitors
- More and faster memory now with 512MB DDR3L 400MHz SDRAM, 4GB eMMC Memory
- Onboard storage frees up the microSD card slot for greater expansion
- Support for existing Cape plug-in boards
- TPS65217C PMIC regulator and one additional LDO
- Debug support: Optional onboard 20-pin CTI JTAG
- HS USB 2.0 Client and Host ports
SKU: n/a -
Boards Compatible with Arduino
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
SKU:- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: n/a -
Cytron Motor Drivers
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
SKU:- SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
- USB Programming facilitated by the CH340
- Input voltage: USB 5V, from computer, power bank or standard USB adapter
- Piezo buzzer that will act as simple audio output
- 500mA (maximum) 3.3V voltage regulator
- 0-5V outputs with 3.3V compatible inputs
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP 6-pin Header
SKU: n/a -
PIC Development board
Cytron 40 pins PIC Start-Up Kit SK40C
SKU:-
ICSP connector for UIC00B -simple and fast method to load program.
-
Perfect fit for 40 pins PIC16F and PIC18F.
-
Operating Voltage Range: 7V – 15VDC
-
2 x programmable switch.
-
2 x LED indicator.
-
Exchangeable Crystal.
-
Existing pad for 16 x 2 characters LCD display.
-
UART connection to interface with other controller or even computer.
SKU: n/a -
-
PIC Development board
28 Pins PIC Start-up Kit – SK28A
SKU:-
Industrial grade PCB.
-
Every board is being tested before it is shipped out.
-
Compact platform and breadboard-friendly
-
Suitable for hobbyists and expert.
-
Save development and soldering time.
-
Turn pin for crystal comes with 20MHz Crystal by default, the user may use crystal at various frequencies
-
Mini USB socket on board may use PIC18F2550 for USB device development, example USB Bootloader.
-
2×8 Character Parallel LCD pad ready (optional).
SKU: n/a -
-
PIC Development board
40 pins PIC Start-Up Kit Combo 1 – SK40C PIC16F877A (SK40C1)
SKU:-
ICSP connector for UIC00B -simple and fast method to load program.
-
Perfect fit for 40 pins PIC16F and PIC18F.
-
2 x programmable switch.
-
2 x LED indicator.
-
Exchangeable Crystal.
-
Existing pad for 16 x 2 characters LCD display.
SKU: n/a -
-
PIC Development board
40 pins PIC Start-Up Kit Combo 2 SK40C + PIC18F4550 (SK40C2)
SKU:-
ICSP connector for UIC00B -simple and fast method to load program.
-
Perfect fit for 40 pins PIC16F and PIC18F.
-
2 x programmable switch.
-
2 x LED indicator.
-
Exchangeable Crystal.
-
Existing pad for 16 x 2 characters LCD display.
-
UART connection to interface with other controller or even computer.
-
USB on board for certain PIC18F.
SKU: n/a -
-
PIC Development board
40 Pins dsPIC Start-Up Kit – SKDS40A
SKU:-
ICSP connector for UIC00A /B-simple and fast method to load program.
-
Perfectly fit for 40 pins dsPIC (16-bit), NOT for the 40-pins 8-bit PIC.
-
2 x programmable switch.
-
2 x programmable LED indicator.
-
Changeable Crystal – default 10MHz.
-
Existing pad for 16 x 2 characters LCD display.
SKU: n/a -
-
Boards Compatible with Arduino
pcDuino3B – 1GHz Cortex Dual Core 1G RAM, Compatible With Arduino
SKU:- 100% compatible with original Arduino Shields
- 100% compatible with Linux and Android
- Further support for:
- C, C ++ with GNU tool
- Java with standard Android SDK Python
- Arduino pin header, Arduino UNO Slots: 14x GPIO, 2x PW M, 6x ADC, 1x UART, 1xSPI, 1x I2C
- Ethernet 10M/100Mbps, WiFi, SATA
SKU: n/a -
PIC Development board
Olimex PIC32-PINGUINO-MICRO ARDUINO like PIC32MX440F256H USB OTG
SKU:- PIC32MX440F256H 80 Mhz microcontroller 256KB Flash 32KB RAM
- MicroSD card for data logging
- UEXT connector which allows many existing modules like RF, ZIGBEE, GSM, GPS to be connected
- Two LEDs
- One BUTTON
- RESET button
- A Mini USB connector is used, which is common and used in most cell phones, so you do not have to buy other cables
- All PIC ports available on 0.1″ connectors
SKU: n/a -
-