IoT
Showing all 46 results
-
xBee Zigbee modules
Zigbee XBee Module S2C 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004
SKU:- Integrated, Wire Antenna
- Interoperable with other ZigBee-compliant devices
- Programmable versions with onboard microprocessor enable custom ZigBee application development
- Supports binding and multicasting for easy integration into a home automation platform
- Data Rate: RF 250 Kbps, Serial up to 1 Mbps
- Range: Indoor 200 ft (60 m), Outdoor (LOS) 4000 ft (1200 m)
- Transmit Power: 3.1 mW (+5 dBm)
- Channels: 16 channels
SKU: n/a -
Other ESP WIFI Modules
WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board
SKU:- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0)
- Analog Input Pins: 1
- Flash Memory: 4MB
- On-Board Switching Power Supply:
- Input Voltage Range: 9V to 12V
- Output: 5V at 1A Max
SKU: n/a -
Ai Thinker ESP Modules, LORA Module
Ai Thinker LoRa Series Ra-02 Spread Spectrum Wireless Module
SKU:- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
SKU: n/a -
xBee Zigbee modules
Zigbee XBee Pro S2C 802.15.4 Module 63mW 3Km+ 3.2dBi Antenna
SKU:- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: n/a -
xBee Zigbee modules
XBee Pro S2C 63mW 802.15.4 Module without Antenna
SKU:- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: n/a -
Shield for Arduino
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
SKU:- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
SKU: n/a -
-
IoT WIFI Smart Switches
Sonoff BASICR2 WI-FI Smart Switch
SKU:- Support 433MHz RF remote.
- Support remotely turn on or off added devices.
- Support Max 8 timers tasks for each added device.
- Works with AMAZON ALEXA
- Works with GOOGLE ASSISTANT
- Also, Work with NEST
- Support numerous WiFi smart switches one smartphone.
SKU: n/a -
Relay Modules
ESP8266 10A DC 7-30V Network Relay WIFI Module
SKU:- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
SKU: n/a -
Relay Modules
ESP8266 WiFi 5V 1 Channel Relay Module
SKU:- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: n/a -
-
IR and RF Transmitters and Receivers
HC-11 CC1101 433MHz Wireless Transceiver RF Serial UART Module
SKU:- 433MHz operation
- Ultra-low power consumption (3.5mA or 22mA depending on mode) with sleep option (80μA).
- 10dBm output power and high sensitivity providing long range in the open environment.
- 3V-6V operating voltage.
- Serial pass-through mode to replace the serial cable (half duplex).
- IO pass-through modes.
SKU: n/a -
-
Arducam Cameras and Accessories
Arducam HQ Camera for Jetson Nano and Xavier NX, 12MP 1/2.3 Inch IMX477 with 6mm CS-Mount Lens
Arducam Cameras and AccessoriesArducam HQ Camera for Jetson Nano and Xavier NX, 12MP 1/2.3 Inch IMX477 with 6mm CS-Mount Lens
SKU:- Based on IMX477 Sensor
- Optical Format: 1/2.3″ (diagonal 7.857mm)
- Resolution: 4056(H) x 3040(V) 12MP
- Pixel Size: 1.55um x 1.55um
- Lens Field of View (FOV): 65° (H)
SKU: n/a -
-
-
xBee Zigbee modules
Digi XBee3 2.4GHz ZB3.0 PCB Antenna
SKU:- Serial Data Interface: Uart, Spi, I2c.
- Configuration Method: API Or At Commands, Local Or Over-the-air.
- Frequency Band: ISM 2.4 GHz.
- Form Factor: Micro, Through-hole, Surface Mount.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs.
- Digital I/o: 15.
SKU: n/a -
Arducam Cameras and Accessories
Arducam 5MP OV5647 NoIR MINI Camera with Flex Cable
SKU:- Sensor: 1/4 inch OV5647 sensor in a fixed-focus lens
- Angle of view: 72.4° diagonal
- Integral IR filter, visible light
- Still picture resolution: 2592 x 1944, Max video resolution: 1080p
- Dimension: 60mm × 11.5mm × 5mm.
SKU: n/a -
xBee Zigbee modules
Digi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna
SKU:- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Configuration Method: API Or At Commands, Local Or Over-the-air
- Frequency Band: ISM 2.4 GHz
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum)
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15.
SKU: n/a -
-
Arducam Cameras and Accessories
Arducam 2MP Stereo Camera for Raspberry Pi, Nvidia Jetson Nano/Xavier NX, with Dual OV2311 Monochrome Global Shutter
Arducam Cameras and AccessoriesArducam 2MP Stereo Camera for Raspberry Pi, Nvidia Jetson Nano/Xavier NX, with Dual OV2311 Monochrome Global Shutter
SKU:- Based on Dual Monochrome global shutter OV2311 Sensor
- Pixel Size: 3 μm x 3 μm
- Active Array Size: 1600 x 1300
- Output Interface: 2-lane MIPI serial output
- Output Formats: 8-bit/10-bit RAW
SKU: n/a -
Other ESP WIFI Modules
ESPresso Lite V2.0 ESP8266, Espressif, IoT, wifi
SKU:-
Features Espressif System’s ESP8266 WROOM-02 Wi-Fi module (with 4Mb flash)
-
Design for IoT with free espert.io cloud and app service
-
Support the Arduino IDE (boards manager) and libraries
-
Auto program loading from Arduino IDE, using UC00A (or other compatible USB to Serial)
-
Onboard 3.3V Voltage Regulator with the maximum current of 800mA continuous, 1A peak
-
One Reset button, two User Programmable buttons
-
The WROOM-02 module is FCC, CE & TELEC certified
SKU: n/a -
-
-
-
-
Arducam Cameras and Accessories
Arducam 5MP OV5647 NoIR Camera Module for Raspberry Pi 4/3B+/3
SKU:- 1/4″ 5MP NoIR Camera Module OV5647 Sensor with flex cable for Raspberry Pi
- High-Definition video camera for Raspberry Pi Model A/B/B+, Raspberry Pi 2/3/3B+/4
- 5MP Omnivision OV5647 sensor in a fixed-focus lens
- No IR filter, sensitive to IR light
SKU: n/a -
-
Arducam Cameras and Accessories
Arducam 5MP OV5647 NoIR Motorized IRcut filter M12 Mount LS-1820 Lens Camera for Raspberry Pi
Arducam Cameras and AccessoriesArducam 5MP OV5647 NoIR Motorized IRcut filter M12 Mount LS-1820 Lens Camera for Raspberry Pi
SKU:- Comes With a Motorized IR Cut Filter and M12x0.5 Mount
- Compatible With Raspberry Pi 4/3B+/3
- Based on ov5647 5MP camera
- Automatic Switching Between Day and Night Mode
SKU: n/a -
Other ESP WIFI Modules
ESPresso Lite V2.0 IoT Starter Kit ESP8266, Espressif IoT WiFi
SKU:-
Features Espressif System’s ESP8266 WROOM-02 Wi-Fi module (with 4Mb flash)
-
Design for IoT with free espert.io cloud and app service
-
Support the Arduino IDE (boards manager) and libraries
-
Auto program loading from Arduino IDE, using UC00A (or other compatible USB to Serial)
-
Onboard 3.3V Voltage Regulator with the maximum current of 800mA continuous, 1A peak
-
One Reset button, two User Programmable buttons
-
The WROOM-02 module is FCC, CE & TELEC certified
- Ready pads for I2C OLED panel
SKU: n/a -
-
Arducam Cameras and Accessories
Arducam Camera Breakout Board 0.3MP(OV7725) w/ M12 lens (6mm lens)
SKU:- High Sensitivity Camera For Low-Light Operation
- Standard SCCB Interface
- Output support for Raw RGB, RGB (GRB 4:2:2, RGB565/555/444) and YCbCr (4:2:2) formats
- Supports image sizes: VGA, QVGA, and any size scaling down from CIF to 40×30
- Lens Shading Correction
- Saturation Level Auto Adjust (UV Adjust)
SKU: n/a -
IoT Development Boards
NANO32 ESP32 IoT Development Board
SKU:-
ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
-
40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
-
4MB Flash (32MBit)
-
FTDI231 for the USB to Serial communication
-
Auto-reset for automatic flash of new program
-
On board 3.3V, 0.5A LDO, tested to work upto 1A
-
2.5dBi Peak Gain, 0.5dBi averange gain antenna
SKU: n/a -