Home IOT
Showing all 12 results
-
xBee Zigbee modules
Zigbee XBee Module S2C 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004
SKU:- Integrated, Wire Antenna
- Interoperable with other ZigBee-compliant devices
- Programmable versions with onboard microprocessor enable custom ZigBee application development
- Supports binding and multicasting for easy integration into a home automation platform
- Data Rate: RF 250 Kbps, Serial up to 1 Mbps
- Range: Indoor 200 ft (60 m), Outdoor (LOS) 4000 ft (1200 m)
- Transmit Power: 3.1 mW (+5 dBm)
- Channels: 16 channels
SKU: n/a -
Other ESP WIFI Modules
WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board
SKU:- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0)
- Analog Input Pins: 1
- Flash Memory: 4MB
- On-Board Switching Power Supply:
- Input Voltage Range: 9V to 12V
- Output: 5V at 1A Max
SKU: n/a -
Ai Thinker ESP Modules, LORA Module
Ai Thinker LoRa Series Ra-02 Spread Spectrum Wireless Module
SKU:- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
SKU: n/a -
xBee Zigbee modules
Zigbee XBee Pro S2C 802.15.4 Module 63mW 3Km+ 3.2dBi Antenna
SKU:- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: n/a -
xBee Zigbee modules
XBee Pro S2C 63mW 802.15.4 Module without Antenna
SKU:- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: n/a -
Shield for Arduino
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
SKU:- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
SKU: n/a -
-
IoT WIFI Smart Switches
Sonoff BASICR2 WI-FI Smart Switch
SKU:- Support 433MHz RF remote.
- Support remotely turn on or off added devices.
- Support Max 8 timers tasks for each added device.
- Works with AMAZON ALEXA
- Works with GOOGLE ASSISTANT
- Also, Work with NEST
- Support numerous WiFi smart switches one smartphone.
SKU: n/a -
Relay Modules
ESP8266 WiFi 5V 1 Channel Relay Module
SKU:- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: n/a -
xBee Zigbee modules
Digi XBee3 2.4GHz ZB3.0 PCB Antenna
SKU:- Serial Data Interface: Uart, Spi, I2c.
- Configuration Method:Â API Or At Commands, Local Or Over-the-air.
- Frequency Band: ISM 2.4 GHz.
- Form Factor: Micro, Through-hole, Surface Mount.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs.
- Digital I/o: 15.
SKU: n/a -
xBee Zigbee modules
Digi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna
SKU:- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Configuration Method:Â API Or At Commands, Local Or Over-the-air
- Frequency Band: ISM 2.4 GHz
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum)
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15.
SKU: n/a -
