Bluetooth Module
Showing all 9 results
-
USB Interface Module
ELM327 OBD2 V2.1 Bluetooth Interface Auto Car Diagnostic Scanner
SKU:Measures:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure
SKU: n/a -
USB Interface Module
MINI V2.1 ELM327 OBD2 Bluetooth Interface Auto Car Scanner
SKU:-
The newly developed wireless scan tool.
-
It supports most of the OBD-II protocols.
-
Bluetooth connection, no Batteries, Cables, or Switches.
-
Wireless (Bluetooth) 5~10 meter
-
Retrieve Fault Codes (DTCs) and clear Check Engine lights.
-
Clear trouble codes and turn off the MIL (“Check Engine” light)
- Set the maximum number of responses to obtain
SKU: n/a -
-
GSM GPRS and GNSS Modules
LILYGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800H Module Unsoldered
GSM GPRS and GNSS ModulesLILYGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800H Module Unsoldered
SKU:- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
- Working current: About 70mA
SKU: n/a -
USB Interface Module
V1.5 ELM327 OBD2 Bluetooth Interface Auto Car Scanner
SKU:Works with all OBD-II compliant vehicles2. Wireless (Bluetooth)3. Software included for Palm, PDA4. Software included for Windows PC5. Software included for Windows Smartphone6. Supports ISO 9141, KWP20007. Supports SAE J18508. Supports CAN busSKU: n/a -
IoT Development Boards
LILYGO TSIM7000G Module ESP32- WROVER-E Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board
IoT Development BoardsLILYGO TSIM7000G Module ESP32- WROVER-E Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board
SKU:- Main chip: ESP32-WROVER-E, SIM7000G
- Flash Memory:4M Flash / 8M PSRAM
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- SIM Card Size: Nano SIM Card
- Antenna: SIM Antenna,GPS Antenna
- Operating Temperature Range:-40-85 degrees
SKU: n/a -
Bluetooth and NRF Modules
TTGO T-Beam V1.1 ESP32 LORA 433MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
Bluetooth and NRF ModulesTTGO T-Beam V1.1 ESP32 LORA 433MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
SKU:-
Working voltage: 1.8~3.7v
-
Acceptable current：10~14mA
-
Transmit current: 120mA@+20dBm,90mA@+17dBm,29mA@+13dBm
-
Operating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)
-
Transmit power: +20dBm
- 4MB flash memory,
- Low voltage detection, and temperature sensor,
- Fast wake-up and frequency hopping LED signal indicator, and battery with data backup.
SKU: n/a -
-
IoT Development Boards
LILYGO SIM7600E-H Module ESP32- WROVER-E Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board Unsoldered
IoT Development BoardsLILYGO SIM7600E-H Module ESP32- WROVER-E Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board Unsoldered
SKU:- Main chip:ESP32 WROVER-E
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- Antenna: SIM Antenna，GPS Antenna
- Operating Temperature Range:-40-85 degrees
SKU: n/a -
Bluetooth and NRF Modules
LILYGO T8 V1.7 ESP32 8MB PSRAM TF CARD 3D ANTENNA WiFi &, Bluetooth ESP32-WROVER-Unsoldered
Bluetooth and NRF ModulesLILYGO T8 V1.7 ESP32 8MB PSRAM TF CARD 3D ANTENNA WiFi &, Bluetooth ESP32-WROVER-Unsoldered
SKU:- Brand Name: LILYGO
- Model Number: TTGO T8 V1.7 ESP32
- Compatible Audio and Video Equipment Style: Amplifier
- Weight:9.5g
- Lastest ESP32 Version: REV1
- WIFI & Bluetooth
- 16MB Flash & 8MB PSRAM
SKU: n/a