Best Prices
Showing 145–183 of 183 results
-
Best Prices
ATmel MCU ATMEGA2560-16U MEGA 2560 R3 Improved Version CH340G Board
SKU: 43195- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
SKU: 43195 -
SmartElex Bluetooth + WiFi Modules
SmartElex ESP32 38Pin Development Kit WiFi+Bluetooth Ultra-Low Power Consumption Dual Core – 1 PCS
SmartElex Bluetooth + WiFi ModulesSmartElex ESP32 38Pin Development Kit WiFi+Bluetooth Ultra-Low Power Consumption Dual Core – 1 PCS
SKU: R1505411. 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applicationsSKU: R150541 -
-
-
-
Best Prices, GPS Modules
NEO-6M GPS Module with EPROM – Normal Quality
SKU: 1270231- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: 1270231 -
-
Best Prices
W5500 TCP / IP SPI to LAN Ethernet Interface SPI to LAN / Ethernet Converter
SKU: 699627- 80MHz high-speed SPI interface
- Built-in hardware TCPIP protocol stack
- Support up to 8 Socket connections
- Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocol
- Support power-down wake up
- Support high-speed serial peripheral interface (SPI mode 0~3)
- Internal 32K byte send and receive buffer
SKU: 699627 -
Best Prices
Mega 2560 ATmega2560-16U2 Board without USB Cable for Arduino
SKU: 14135- 54 digital input / output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
SKU: 14135 -
-
-
Best Prices
XL7015 DC-DC Step Down Adjustable Power Supply Buck Module
SKU: 890247- Input voltage range: 5V-80V DC
- Output voltage range: 1.5V-20V DC adjustable.
- Output current: 0-0.8A.
- High efficiency up to 90%
- Built-in thermal shutdown function
- Built-in current limit function
- Built output short protection function
SKU: 890247 -
Best Prices
150W AC-DC Buck Converter 100V-240V to 24V 6A Step Down Power Supply Module
SKU: 43120- Input Voltage : AC 100 – 240 V(50 HZ/60 HZ).
- Output Voltage: DC 24V.
- Output Current : Peak 6A and Nominal 5.5A (no voltage drop).
- Output Power : 150W (maximum 220 W).
- Overload Protection: Yes.
- Over Current Protection : Yes.
- Short Circuit Protection: Yes.
SKU: 43120 -
Best Prices, Other ESP WIFI Modules
ESP32-WROOM-32E 4M 32Mbit Flash WiFi Bluetooth Module
SKU: 975749- ESP32-D0WD-V3 embedded, Xtensa dual-core
- 32-bit LX6 microprocessor, up to 240 MHz
- 448 KB ROM for booting and core functions
- 520 KB SRAM for data and instructions
- 16 KB SRAM in RTC
- WiÂFi: 802.11b/g/n
- Bit rate: 802.11n up to 150 Mbps
SKU: 975749 -
Best Prices, Boost Converter
1200w DC DC Boost Step Up Converter 8-60V to 12-83V 20A
SKU: 815778- Input voltage :10-60V
- Output voltage: 12-83V (adjustable)
- Output Current: 12A
- Input Current: 20A
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
SKU: 815778 -
Best Prices
PICkit3 Debugger Programmer Emulator Controller Development Board
SKU: 28352- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
- Program up to 512K byte flash.
SKU: 28352 -
Best Prices
3.5″ inch ILI9486 TFT Touch Shield LCD Module 480×320 for Arduino Uno
SKU: 815796- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
SKU: 815796 -
-
Best Prices
MAX31865 PT100-PT1000 RTD Platinum Resistance Temperature Detector Module
SKU: 890201- Integration Lowers System Cost, Simplifies Design
- Efforts, and Reduces Design Cycle Time
- High Accuracy Facilitates Meeting Error Budgets
- 15-Bit ADC Resolution; Nominal Temperature
- Resolution 0.03125NC (Varies Due to RTD Nonlinearity)
- Total Accuracy Over All Operating Conditions:
SKU: 890201 -
-
-
-
-
Best Prices, Stepper Motor Drivers
DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
Best Prices, Stepper Motor DriversDM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
SKU: 1150743- Â Maximum current: 7.2A, resolution: 0.1A
- Â Impulse response frequency: 200KHz
- Â DC power supply
- Â The input voltage range: 20-50 VDC.
- Â Power supply is greater than 200W. Recommend 20-50 VDC
-  Operating Temperature: -10℃~45℃
SKU: 1150743 -
Best Prices, Stepper Motor Drivers
TB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
Best Prices, Stepper Motor DriversTB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
SKU: 835839- Input Current: 1~5A
- Supply Voltage: 12 to 48VDC
- Output Current: 0.2~5.0A
- Power (MAX): 160W
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
SKU: 835839 -
-
Best Prices, Raspberry Pi Displays
10.1 inch IPS LCD Screen 1280×800 with Driver Board Kit for Raspberry Pi
Best Prices, Raspberry Pi Displays10.1 inch IPS LCD Screen 1280×800 with Driver Board Kit for Raspberry Pi
SKU: 76750- Operating voltage: 12V
- Current requirement: 1A-2A
- Rated power: 6-7W
- Signal input: 2 Road AV+VGA
- System mode: PAL/NTSC
- HDMI input: version HDMI 1.1
- VGA input: 1280×800 physical resolution
- Physical resolution: 1280 x 800
- Brightness: 350 lumens
- Panel type: TFT
- Interface type: Digital
- Number of wiring: 40 PIN LVDS
- Backlight: LED
SKU: 76750 -
Raspberry Pi Displays, Refurbished, Refurbished & Partial Working, Refurbished Development Boards
Refurbished – 3.5″ Touch Screen LCD Raspberry Pi Display
Raspberry Pi Displays, Refurbished, Refurbished & Partial Working, Refurbished Development BoardsRefurbished – 3.5″ Touch Screen LCD Raspberry Pi Display
SKU: R192184- LCD Type: TFT.
- Touch Screen Type: Resistive Screen.
- Backlight: Yes, LED.
- Resolution (Pixel): 320 x 480.
- Aspect Ratio: 8:5.
- Touch Controller: XPT2046.
SKU: R192184
