Arduino UNO
Showing all 36 results
-
Best Prices, Boards Compatible with Arduino
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
Best Prices, Boards Compatible with ArduinoUno R3 CH340G ATmega328p Development Board Compatible with Arduino
SKU:- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Shield for Arduino
L293D Motor Driver/Servo Shield for Arduino
SKU:- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: n/a -
Boards Compatible with Arduino
UNO R3 CH340G ATMega328P compatible with arduino + Cable
SKU:- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Best Prices, Boards Compatible with Arduino
Uno R3 Board without Cable compatible with Arduino
SKU:- Supported by Arduino IDE
- Operating Voltage: 5 V
- Input Voltage: 7 to 12 V
- Digital I/O pins: 14
- PWM Pins: 6
- Analog Input pins: 6
- Flash Memory: 32 KB (0.5 KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
SKU: n/a -
Shield for Arduino
Proto Screw Shield 1.0 For Arduino Uno
SKU:- Arduino terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
SKU: n/a -
Best Prices, Kits compatible with Arduino
Arduino Uno R3 Beginners Kit
SKU:- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by Robu.in.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
SKU: n/a -
Boards Compatible with Arduino
Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
Boards Compatible with ArduinoUno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
SKU:- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Micro-controller : ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Shield for Arduino
UNO Proto Shield prototype expansion board with SYB-170 mini breadboard
SKU:- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- Two 3mm general use LEDs, red and green, as well as 2 matching resistors
SKU: n/a -
Best Prices, Kits compatible with Arduino
Advanced Kit for Arduino
SKU:- All-in-one kit, a great starter kit for learning to code.
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
SKU: n/a -
Sensor Kits
37 in 1 Sensors Kit compatible with Arduino
SKU:- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Infrared sensor receiving module
- Laser sensor module
- Temperature and humidity sensor module
- Infrared sensor module
- 5v relay module
- Obstacle avoidance sensor module.
SKU: n/a -
Shield for Arduino
Data Logger module Logging Shield data Recorder Shield
SKU:- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.
- Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.
- Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.
- The onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
- A dedicated and well-designed data logging shield for Arduino.
SKU: n/a -
Kits compatible with Arduino
Uno Learning kit for Arduino
SKU:- All-in-one kit, a great starter kit for learning coding.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Display for Arduino
1602 LCD Board Keypad Shield Blue Backlight
SKU:- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
SKU: n/a -
Shield for Arduino
Sensor Shield V5 Expansion Board For Arduino
SKU:- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless rf modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
SKU: n/a -
Shield for Arduino
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
SKU:- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
SKU: n/a -
-
Shield for Arduino
ADK USB Host Shield compatible with Arduino
SKU:- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
SKU: n/a -
Shield for Arduino
XBee Shield V03 Module Wireless Control
SKU:- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB2.0 protocol.
SKU: n/a -
Shield for Arduino
Servo Driver Module Shield 16 Channel
SKU:- The I2C input, PWM output control 16 roads, steering gear can 16 roads.
- The steering gear power independent V + input maximum 6 V.
- Logic signals and logical power independent output for 3V to 5 V.
- 40-1000 Hz frequency.
- Terminal block for power input.
- Reverse polarity protection on the terminal block input
- Green power-good LED
SKU: n/a -
Cytron Motor Drivers
Cytron LCD keypad Shield High Quality
SKU:- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
SKU: n/a -
Cytron Motor Drivers
Cytron 2Amp Motor Driver Shield
SKU:-
Logic control, 5V from Arduino main board
-
Polarity protection for External motor power input
-
2 fast test buttons for each motor channel
-
Motor Driven Voltage：6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source)
-
Up to 2A current each channel
-
Pin 4, 5,6,7 are used to drive two DC motor
-
Support PWM speed control
-
Support advance speed control
SKU: n/a -
-
Cytron Motor Drivers
Cytron Arduino PS2 Shield
SKU:- 5V powered low current consumption.
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode.
- A status LED
- Jumper selector to select different UART Baud Rate (9600, 57600, 115200).
- Jumper selectors to select different digital pin as UART TX and RX pin.
SKU: n/a -
Cytron Motor Drivers
Cytron ESP8266 WiFi Shield V2.0 W/ Micro SD Card Slot For Arduino Uno
SKU:- Basically, Rev2.0 utilize WROOM-02 instead of ESP8266-12 as the WiFi module.
- Separate 3.3V voltage regulator for ESP8266-12 WROOM-02 module, 500mA max output.
- Each and every board is preassembled and tested before it is being shipped out to you.
- 802.11 b/g/n.
- Support Wi-Fi Direct (P2P), soft-AP.
- Integrated TCP/IP protocol stack.
SKU: n/a -
Shield for Arduino
XD-216 Screw shield Screw Shield V1 Expansion Board
SKU:- Size: 29 x 71 mm
- Combines the function of Arduino Screw Shield and Sensor Shield.
- Expand all of IO interfaces from Arduino.
- 3-Pin male headers for easy sensor/servo connection.
- The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient.
SKU: n/a -
-
Shield for Arduino
Cytron XBee Shield
SKU:-
Mounts directly onto your Arduino
-
DIN and DOUT pins of XBee can be connected to either the USB’s UART pins or another digital pin on the Arduino (D0, D1, D2, D3, D8, D9, D10, D11)
-
3.3V power regulation and proper level shifting on-board communication between 5V and 3.3V
-
Extra 0.1″ spaced prototyping holes
-
Reset button brought out to shield
-
Power, DIN, DOUT, RSSI, and DIO5 indicator LEDs
SKU: n/a -
-
Raspberry Pi Accessories
BPiDuino UNO Board Module (To make BANANA PI compatible with Arduino UNO)
SKU:- ATmega328 chip on the module
- Compatible with for Arduino Uno
- Switch 5V or 3.3V GPIO
- Compatible with Processing code
- Expand SPI of Banana Pi
- Working voltage: 3.3V-4.5V
- GPIO voltage: 3.3V or 5.5
- 8 channel 10bit high-resolution ADC
SKU: n/a -
Shield for Arduino
SHIELD-EKG-EMG
SKU:- Stackable connectors – up to 6 channels can be stacked and wired to A0-A6 analogue inputs
- Calibration signal generation by D4/D9 digital output
- Precise trimmer potentiometer for calibration (all boards are shipped completely assembled, tested and calibrated so that you don’t have to do this unless you want to see how things works)
- Input connector for standard or active electrodes
- Works with both 3.3V and 5V Arduino boards
SKU: n/a -
Shield for Arduino
Cytron Easy MP3 Shield
SKU:-
Onboard high-quality MP3 decoder.
-
Onboard dual channel/Stereo 3W differential audio amplifier for an external speaker.
- A MicroSD status LED.
-
Onboard stereo 3.5mm audio jack socket for earphones.
-
Onboard microSD socket for MP3 audio files storage.
-
The interface from Arduino, UART, selectable to use soft serial.
-
Stackable side headers.
- Supply voltage: 5V.
SKU: n/a -
-
Shield for Arduino
XBee IO Expansion Shield – XBEE 2
SKU:- Expand 14 digital IO interface (12 steering gear interface)and power
- Six analog IO interfaces and power
- One digital port interface for external power supply terminals
- Digital port external power supply and on-board electrical automatic switch
- One external power input terminals and one input needle
- RS485 interface (D0-RX, D1-TX, D2-EN)
- IIC/the I2C/TWI interface (A4-SDA, A5-SCL)
- SD card module interface
SKU: n/a