3D printer
Showing 49–96 of 111 results
-
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Orange
SKU:- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: n/a -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Blue
SKU:- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: n/a -
Sleeves and Drag Chain
Nylon 2mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU:- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: n/a -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Silver
SKU:- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: n/a -
Sleeves and Drag Chain
Nylon 14mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU:- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: n/a -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Yellow
SKU:- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: n/a -
-
-
Shield for Arduino
3D Printer CNC Shield V4 Expansion Board For Arduino
SKU:- Worked with Arduino nano.
- 3 axis stepper motor driver
- Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
- Released the I2C interface, you can connect to the LCD I2C or another I2C module.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible.
SKU: n/a -
3D Printer Extruder Kit
1.75mm Direct Extruder Full Kit
SKU:- Nozzle diameter: 0.4mm
- Voltage: 12V.
- Power: 40W.
- Operating Temperature: 200ºC to 280ºC
- Compatible for ABS and PTEG material
- Feed diameter : For 1.75mm Filament (Direct)
- Heater size : 6 x 15mm (DxL).
- 1.75mm Direct Extruder Full Kit
SKU: n/a -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Green
SKU:- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: n/a -
Pro-range Stepper Motors
PRO-RANGE NEMA23 PR57HS112-3004-03 30.61 kg-cm Hybrid Bipolar Stepper Motor -Round Type Shaft
Pro-range Stepper MotorsPRO-RANGE NEMA23 PR57HS112-3004-03 30.61 kg-cm Hybrid Bipolar Stepper Motor -Round Type Shaft
SKU:- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Motor Type: Bipolar
- Shaft Type: Round Type Shaft
- Holding Torque: 306 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 8 mm
SKU: n/a -
3D Printer Stepper Motors, Nema 23 Stepper Motors
JK57HS112-3004-03 NEMA23 30.61 kg-cm Hybrid Bipolar Stepper Motor – D-Type Shaft
3D Printer Stepper Motors, Nema 23 Stepper MotorsJK57HS112-3004-03 NEMA23 30.61 kg-cm Hybrid Bipolar Stepper Motor – D-Type Shaft
SKU:- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Motor Typr: Bipolar
- Holding Torque: 306 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 8 mm
SKU: n/a -
Heat Shrink Tubes / Sleeve, Sleeves and Drag Chain
Nylon 2M mesh tube/braided nylon sleeve for Wire Protection
Heat Shrink Tubes / Sleeve, Sleeves and Drag ChainNylon 2M mesh tube/braided nylon sleeve for Wire Protection
SKU:- Width: 8 mm
- Length: 2 M.
- Operating temperature range: -70ºC to +155ºC
- Melt temperature: 250 ºC
- Lasts longer than cable ties
- Reduce harness weight
- Easy access to breakouts
SKU: n/a -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Brown
SKU:- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: n/a -
3D Printer Display and Controller
2004 LCD Display RepRapDiscount Smart Controller with Adapter
SKU:- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
SKU: n/a -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Beige colour
SKU:- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: n/a -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Gold
SKU:- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: n/a -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Purple
SKU:- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: n/a -
-
-
Stepper Motor Drivers
LV8729 6V-36V Ultra Quiet 4-layer Substrate Stepper Motor Driver with Heatsink for 3D Printer
Stepper Motor DriversLV8729 6V-36V Ultra Quiet 4-layer Substrate Stepper Motor Driver with Heatsink for 3D Printer
SKU:1. In 64 subdivision or 128 subdivision to achieve a better ultra-quiet effect.
2. Operating voltage: 6V-36V, the proposed voltage is 12V.
3. The maximum current is 1.5A, the default is 0.8A.
4. Segment: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128.SKU: n/a -
eSun PLA plus Filament
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Pink
SKU:- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: n/a -
3D Printer Extruder Kit
Complete Kit of MK8 Extruder with 0.3mm Nozzle (Assembled)
SKU:- High-Quality Single End Cartridge Heater(Heating Element )
- High-quality stepper motor with larger torque and less heat buildup
- Uniform heating aluminium heater block
- Direct transmission, without the heavy gears, compact size and weight
- The lever mechanism makes filament insertion and extraction a breeze
SKU: n/a -
3D Printer Extruder Parts and Fans
MK8 Extruder Kit For Makerbot Prusa i3 3D Printer 1.75/0.4mm Printhead
3D Printer Extruder Parts and FansMK8 Extruder Kit For Makerbot Prusa i3 3D Printer 1.75/0.4mm Printhead
SKU:- Extrusion nozzle: 0.4mm.
- Material Print: 1.75mm
- Nozzle Flow: About 24cc / hour
- Special ceramic heating insulation cotton guarantee stability; energy saving.
- Direct transmission, without heavy gear, compact size and weight
- There are a variety of specifications to choose the most suitable is the best
- 100K NTC thermistor, cooling fan
SKU: n/a