A sound sensor is defined as a module that detects sound waves through its intensity and converting it to electrical signals. sound sensor consists of an in-built capacitive microphone, peak detector and an amplifier (LM386, LM393, etc.) that’s highly sensitive to sound.
Sound sensors are used in many other days to day applications including Consumer electronics such as phones, computers, music systems, Security and Monitoring systems such as burglar alarms, door alarm, etc.
Sound Sensor
Showing all 24 results
-
Sound Sensor
INMP441 MEMS High Precision Omnidirectional Microphone Module I2S
SKU: 975775- Digital I2S interface with high precision 24-bit data
- High signal to noise ratio is 61 dBA
- High sensitivity – 26 dBFS
- Stable frequency response from 60 Hz to 15 kHz
- Low power consumption: low current consumption 1.4 mA
- High PSR: -75 dBFS
SKU: 975775 -
Sound Sensor
Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino
SKU: 11584- Main chip: LM393, Electret condenser microphone
- Working voltage: DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
SKU: 11584 -
Sound Sensor
Analog Sound Sensor Microphone Module for Arduino
SKU: 321988- Detectable sound signal size
- Built-in filter-rectifier circuit, DC signal output
- Good sensitivity, built-in amplifier circuit, adjustable gain
- Voltage signal for sound intensity can be obtained by AD conversion
- Analog voltage signal output, signal amplitude VCC/2
- Compatible for Arduino sensor interface.
SKU: 321988 -
Sound Sensor
LM393 Sound Detection Sensor Module – Black
SKU: 44108- Working voltage: DC 3.3-5V.
- IC Chip: LM393
- Signal output indication.
- The output is digital.
- Single channel signal output.
- With the retaining bolt hole, convenient installation.
- Output low level and the signal light when there is sound.
SKU: 44108 -
Sound Sensor
ISD1820 Recording Module Voice Board With On Board Mic and Loud Speaker
SKU: 43800- The main chip: ISD1820.
- Operating Voltage:Â DC 3V-5V.
- Loudspeaker: 8Ω, 0.5W.
- An easy to use 10 seconds of voice recording.
- High-quality, natural voice restored.
- Can be used as a propaganda module.
- With looping, jog playback, single-pass play function.
SKU: 43800 -
Sound Sensor
Seeed Studio Grove Sound Sensor
SKU: 595946- Operating voltage range: 3.3V – 5V
- Operating current: 4 to 5 mA (at Vcc= 5 V)
- Voltage gain: 26 dB (at V=6 V, f=1 kHz)
- Microphone sensitivity: 52 to 48 dB (at f=1 kHz)
- Microphone impedance: 2.2 kΩ
- Microphone frequency: 16 to 20 kHz
- Microphone S/N Ratio: 54 dB
- Inbuilt potentiometer
- Grove compatible interface
- Minimum external parts
SKU: 595946 -
Sound Sensor
6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter
Sound Sensor6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter
SKU: 45833- Supply Voltage: 6-12VDC
- Frequency Range: 100-5500 Hz
- Output: 2.5Vpp/-25db
- Low noise
- High fidelity
- Wide working voltage range
- Low power consumption
- Long transmission distance
SKU: 45833 -
Sound Sensor
Seeed Studio Grove Loudness Sensor
SKU: 597665- Operating voltage: 3.5-10VDC (nominal 5V )
- Working frequency: 50~2000 Hz
- Sensitivity: -48 to 66 dB
- S/N ratio: >58 dB
- Output signal range: 0 – 1023 (Analog signal)
- Gain adjustable via screw potentiometer
- Wide supply voltage range
- Built-in signal filtering
SKU: 597665 -
Sound Sensor
Speak (Voice) Recognition Module V3 compatible with Arduino
SKU: 43073- Supply Voltage: 4.5 – 5.5 V.
- Current : <40 mA.
- Digital Interface : 5V TTL level for UART interface and GPIO.
- Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking).
- Maximum 7 voice commands effective at same time.
- Arduino library is supplied.
- User-control General Pin Output.
SKU: 43073 -
Sound Sensor
DFRobot Gravity: Analog Sound Sensor For Arduino
SKU: R165713- Voltage Range: 3.3V to 5V compatible.
- Sound Detection: Quickly measures ambient sound intensity.
- Easy Integration: Plug-and-play Gravity Interface.
- Standard Mounting: Two 3mm holes for installation.
- Wide Compatibility: Works with Arduino and Raspberry Pi.
- User-Friendly Icons: Clear function indicators.
- Interactive Applications: Ideal for fun projects like “clap and buzz.
SKU: R165713 -