Raspberry Pi
Showing 49–96 of 591 results
-
Raspberry Pi Case
Acrylic Case for Raspberry PI 4 Model B with Cooling Fan Slot
SKU:- 6-piece Acrylic case with access to all Ports on pi 4
- Compatible for All variant of the Raspberry pi 4 Model B
- Slot for Cooling Fan
- Easy to assemble without any Screws or Nut-Bolts
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- Mounting holes and anti-slip rubber feet at the back.
SKU: n/a -
Raspberry Pi Case
New High Quality Transparent ABS Case for Raspberry Pi 3/3+ with Slot for Cooling Fan & GPIO
Raspberry Pi CaseNew High Quality Transparent ABS Case for Raspberry Pi 3/3+ with Slot for Cooling Fan & GPIO
SKU:- This simple case provides tough protection for your raspberry pi along with access to ports
- High Quality two-piece injection-molded ABS enclosure
- Click together design, no screws, standoffs or elastic bands required
- It is easy to use. You just need to click them together after you fix your pi board on it with screws.
- 4 x Non-slip Silicone Gaskets provided, which can be stuck to the bottom four corners of the box, to prevent it from slipping when placed on a surface.
SKU: n/a -
Raspberry Pi Accessories
HDMI Male to VGA Female Converter Adapter 1080P For PC, Rspberry Pi
SKU:- Support HD resolution, super clear picture, fast transmission speed
- The maximum signal range up to 1920 X 1200, 1080p;
- Video input signal: 5Volts p-p(TTL) ;
- Support VGA video bandwidth: 10 bit, 162MHz
- Video amplifier bandwidth: 162MHz
- Support resolution up to 1920 X 1200, reduce blank signal during transmit.
- No external power supply, plug, and play.
SKU: n/a -
Official Boards and Hats, Raspberry Pi
Raspberry Pi Zero v1.3 Development Board
SKU:The Raspberry Pi Zero v1.3 is super low cost and smaller than it’s bigger brother, the Raspberry Pi 3. The Raspberry Pi Zero v1.3 now comes complete with a camera port. Using the new Raspberry Pi Zero Camera Adapter, you can now connect a Raspberry Pi camera to your Zero.
HAT Compatibility:
The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B+/A+
SKU: n/a -
Raspberry Pi Case
Raspberry Pi 3 Case for Raspberry Pi 3 Model B, B+ only Red/White
SKU:- Snug and secure fit protect your Pi while looking great!
- Anti-slip feet keep your Raspberry Pi stable
- Power and activity lights still visible through the end of the case
- Dimensions: 98 x 72 x 26 (LxWxH) mm.
SKU: n/a -
Microcontroller IC, Official Raspberry Pi Accessories, Raspberry Pi
RP2040 Microcontroller IC by Raspberry PI-REEL of 100
Microcontroller IC, Official Raspberry Pi Accessories, Raspberry PiRP2040 Microcontroller IC by Raspberry PI-REEL of 100
SKU:- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate the core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
SKU: n/a -
Microcontroller IC, Official Raspberry Pi Accessories, Raspberry Pi
RP2040 Microcontroller IC by Raspberry PI REEL of 500
Microcontroller IC, Official Raspberry Pi Accessories, Raspberry PiRP2040 Microcontroller IC by Raspberry PI REEL of 500
SKU:- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate the core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
SKU: n/a -
-
-
Official Raspberry Pi Accessories
Official Raspberry Pi Camera V2
SKU:- Fixed focus lens on-board
- Improved resolution – 8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
- Supports 1080p30, 720p60 and 640x480p90 video
- Size 25mm x 23mm x 9mm
- Weight just over 3g
- Connects to the Raspberry Pi board via a short ribbon cable (supplied)
- Camera v2 is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system
- Uses the Sony IMX219PQ image sensor – high-speed video imaging and high sensitivity
SKU: n/a -
Raspberry Pi Accessories
Raspberry Pi Official Mini HDMI Male to HDMI Female Adapter
SKU:- This Mini HDMI to HDMI adapter is capable of carrying the increased bandwidth of HDMI 2.0 at 18 Gbps.
- It Supports Audio Return Channel (ARC), HDMI Ethernet Channel (HEC), 48 Bit Deep Color, 32-channel audio, HDCP, Dolby True HD 7.1 audio, and 3D video.
- Also Supports resolutions up to 4Kx2K (UHD) including 4096×2160, 3840×2160, 2560×1600, 2560×1440, 1920×1200, and 1080p
SKU: n/a -
Raspberry Pi Accessories
1/4 Cmos 640X480 USB Camera with Collapsible Cable for Raspberry Pi
SKU:- Supports 300k pixels, a maximum resolution of 640×480, and VGA/ YUY2 packed formats
- Dimension: 40mm × 15mm × 30mm; designed for Raspberry Pi and PC
- With a retractable USB cable, convenient to store
- Applies USB 2.0 High-speed Sensor, plug-and-play, no driver installation
- High definition and true colour images.
SKU: n/a -
-
IoT Cameras, Official Raspberry Pi Accessories
5MP Raspberry Pi Zero W Camera Module W/ HBV FFC Cable
IoT Cameras, Official Raspberry Pi Accessories5MP Raspberry Pi Zero W Camera Module W/ HBV FFC Cable
SKU:- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
-
Fully Compatible with Raspberry Pi Zero W.
-
Directly plug into Raspberry Pi Board (besides HDMI port)
SKU: n/a -
Official Boards and Hats, Raspberry Pi
Raspberry Pi Zero Wireless WH (Pre-Soldered Header)
SKU:- Fully HAT compatible
- 40pin GPIO (Unpopulated)
- Stream and watch Hi-definition video output at 1080P
- 512MB RAM and Micro SD Slot for OS
- Tiny Current Draw ~Â 140mA at 5V!
- Mini-HDMI for Video
- Micro-USB OTG Host for Data and Power
- Micro-CSI Camera Port
- On-Board Bluetooth and WiFi.
SKU: n/a -
Memory Cards, Raspberry Pi Accessories
SanDisk Micro SDXC USH-I 64GB Class 10 Memory Card
SKU:- Memory Size: 64 Gigabyte
- Card Type: Micro SD
- Speed: up to 98MB/s
- Class: 10
- High-speed Card can be used for both Mobile phone and Raspberry Pi
- 5 years of manufacturing defect Warranty Given by Sandisk.
SKU: n/a -
-
Raspberry Pi Case
Raspberry Pi 4 Black Compact ABS Case
SKU:- Only 3-piece ABS case with access to all Ports on pi 4
- Compatible for All variants of the Raspberry pi 4 Model B
- Easy to assemble and highly durable material
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- locking screw holes and anti-slip rubber feet at the back.
SKU: n/a -
Raspberry Pi Accessories
Raspberry Pi zero 3in1 Micro USB Cable+Pin Header+HDMI Adapter
SKU:Mini HDMI to HDMI Adapter makes it easy to output data from more than zero raspberry, it supports high-speed data transfer.
Micro USB to USB Female Cable Take Advantage to Match USB Devices.
Male header GPIO is special for Raspberry Pi Zero.SKU: n/a -
-
Raspberry Pi Accessories
1.5 meter RJ45 Retractable Travel Network Cable
SKU:- New generic Retractable Ethernet Cable, CAT5E, Clear
- The cable connects all the hardware destinations on a Local Area Network.
- Ideal for use with 10/100/1000BaseT networks.
- This 5-foot patch cable features 50-micron gold plated connectors that ensure a clean and clear transmission.
- The RJ-45 tap from being damaged during installation.
- Easy to carry in travel bag
SKU: n/a -
Raspberry Pi Accessories
Ultra-thin Raspberry PI Routing Chip Radiator with Thermal Adhesive Size: 30x40x5MM
Raspberry Pi AccessoriesUltra-thin Raspberry PI Routing Chip Radiator with Thermal Adhesive Size: 30x40x5MM
SKU:- Product: Routing Chip Radiator
- Material: aluminum
- Color: Black
- Teeth Number: 7 rows and 14 columns
- Compatible with most Raspberry Pi cases
- Suitable for Auxiliary heat for Raspberry pi 2 model B/Raspberry Pi B+.
SKU: n/a -
Raspberry Pi Case
Raspberry Pi Acrylic Zero Acrylic Case Protection Box
SKU:- High-quality acrylic material, very durable
- Compatible with the cooling fin of the fan.
- Package including two shells and screws.
- Designed especially for Raspberry Pi Zero, full access to all controls and features.
- Used for the installation of building blocks on the shell.
SKU: n/a