Raspberry Pi Hats
Showing 97–143 of 143 results
-
Raspberry Pi Hats
Waveshare Power Over Ethernet HAT (G) For Raspberry Pi 5, 5V 5A Output, Supports 802.3af/at Network Standard, Raspberry Pi 5 PoE HAT
Raspberry Pi HatsWaveshare Power Over Ethernet HAT (G) For Raspberry Pi 5, 5V 5A Output, Supports 802.3af/at Network Standard, Raspberry Pi 5 PoE HAT
SKU:- BRAND: Waveshare
- POE POWER INPUT 38V ~ 57V DC in
- POWER OUTPUT GPIO header: 5V 5A (MAX)
- DIMENSIONS 56.5 × 64.98mm
- NETWORK STANDARD IEEE 802.3af/at PoE
SKU: n/a -
Raspberry Pi Hats
Waveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
Raspberry Pi HatsWaveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
SKU:- Region / Provider EMEA / APAC (except Japan and CMCC) / Brazil
- Module dimensions 42.0 × 30.0 × 2.3 (mm)
- Operating temperature -30°C ~ +70°C
- LTE-FDD B1, B3, B5, B7, B8, B20, B28, B32 (receive only for B32)
- LTE-TDD B38, B40, B41
- B20+B32 (B32 is used for aux component carrier only), B38+B38, B40+B40, B41+B41
SKU: n/a -
Raspberry Pi Hats
Waveshare PCIe To 2-ch M.2 Adapter for Raspberry Pi 5, Compatible with 2230/2242 Size NVMe Solid State Drive, Raspberry Pi 5 M.2 HAT
Raspberry Pi HatsWaveshare PCIe To 2-ch M.2 Adapter for Raspberry Pi 5, Compatible with 2230/2242 Size NVMe Solid State Drive, Raspberry Pi 5 M.2 HAT
SKU:- Interface: PCI-E×1 Gen2
- Compatibility: Raspberry Pi 5B
- Supported SSD Sizes: 2230/2242
- Indicators: Power (PWR), Activity (ACT)
- Design: HAT+ with onboard EEPROM chip
- Power Monitoring: Onboard chip for real-time status
- NVMe Boot: Not supported
SKU: n/a -
-
Raspberry Pi Hats
Waveshare Sense HAT (C) for Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors
Raspberry Pi HatsWaveshare Sense HAT (C) for Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors
SKU:- Product: Waveshare Sense HAT (C) for Raspberry Pi, Onboard Multi Powerful Sensors
- Magnetometer Features: Resolution: 16-bit
- Operating Voltage (VDC): 3.3
- Accelerometer Features: Resolution: 16-bit
- Gyrometer Features: Resolution: 16-bit
SKU: n/a -
-
Raspberry Pi Hats
Waveshare PoE UPS Base Board Designed for Raspberry Pi Compute Module 4, Gigabit Ethernet, Dual HDMI, Quad USB2.0
Raspberry Pi HatsWaveshare PoE UPS Base Board Designed for Raspberry Pi Compute Module 4, Gigabit Ethernet, Dual HDMI, Quad USB2.0
SKU:- POWER INPUT: 7-36V
- STORAGE: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
- FAN: allows speed adjustment and measurement, 5V / 12V
- INDICATOR: M.2 status LED
- CM4: status LED
SKU: n/a -
Raspberry Pi Hats
Waveshare RM500U-CN 5G HAT for Raspberry Pi Quad Antennas LTE-A Multi Band 5G/4G/3G
Raspberry Pi HatsWaveshare RM500U-CN 5G HAT for Raspberry Pi Quad Antennas LTE-A Multi Band 5G/4G/3G
SKU:- 5G NR 3GPP Release 15 NSA/SA operation, Sub-6 GHz
- 5G NR NSA n41, n78, n79
- LTE Category downlink Cat 12, uplink Cat 13
- Operating temperature -30 °C ~ +75 °C
- Supporting RM500U-CN core module, supporting 5G and LTE-A multiple network standards, supporting 5G NSA and SA networking, supporting four major domestic operators
SKU: n/a -
Raspberry Pi Hats
Waveshare Pico-RTC-DS3231 IC Test Board
SKU:- Operating voltage: 3.3V
- Backup battery voltage: 2.3V~5.5V
- Operating temperature: -40°C ~ 86°C
- Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year
- Optional format: 24-hour OR 12-hour with an AM/PM indicator
- 2x programable alarm clock
SKU: n/a -
Raspberry Pi Hats
Waveshare Pioneer600 Raspberry Pi Expansion Board
SKU:- Onboard CP2102:Â USB TO UART converter
- 0.96-Inch OLED Display
- PCF8591 :Â 8-bit AD/DA converter, I2C interface
- BMP180:Â pressure sensor, I2C interface
- PCF8574:Â I/O expansion chip, I2C interface
- DS3231:Â high precision RTC chip, I2C interface
- LFN0038K IR receiver
SKU: n/a -
-
Raspberry Pi Hats
Waveshare PCIe To M.2 Adapter Board (D) for Raspberry Pi 5, Compatible with 2280 / 2260 / 2242 / 2230 size NVMe Protocol M.2 SSD, Raspberry Pi 5 NVMe
Raspberry Pi HatsWaveshare PCIe To M.2 Adapter Board (D) for Raspberry Pi 5, Compatible with 2280 / 2260 / 2242 / 2230 size NVMe Protocol M.2 SSD, Raspberry Pi 5 NVMe
SKU:- PCIe Slot: Designed for use with the PCIe interface on Raspberry Pi 5
- M.2 Slot: M.2 NVMe slot for SSDs
- M.2 SSD Compatibility: Supported Sizes 2280, 2260, 2242, 2230
SKU: n/a -
Raspberry Pi Hats
Waveshare PCIe To 2-Ch M.2 Adapter Type B for Raspberry Pi 5, Compatible with 2280 / 2260 / 2242 / 2230 size NVMe Protocol M.2 SSD, Raspberry Pi 5 NVMe HAT
Raspberry Pi HatsWaveshare PCIe To 2-Ch M.2 Adapter Type B for Raspberry Pi 5, Compatible with 2280 / 2260 / 2242 / 2230 size NVMe Protocol M.2 SSD, Raspberry Pi 5 NVMe HAT
SKU:- PCIe Slot: Designed for use with the PCIe interface on Raspberry Pi 5
- M.2 Slots: Two M.2 NVMe slots
- Board Size: Approx. 100 mm x 50 mm x 15 mm (L x W x H)
- M.2 Slot Placement: Accommodates multiple M.2 SSD sizes
SKU: n/a -
Raspberry Pi Hats
Waveshare Cat-1/GSM/GPRS/GNSS HAT for Raspberry Pi, Based On A7670E module, LTE
SKU:- LTE Cat-1: LTE-FDD: B1, B3, B5, B7, B8, B20
- 2G :GSM/GPRS/EDGE: 900/1800 MHz
- GNSS :GPS, BeiDou, GLONASS
- Power supply: 5V (via USB port or 5V pin header), 3.7 ~ 4.2V (via VBAT pin-header, supports 3.7V Li-ion battery power input)
- 4.2V (via VBAT pin-header, supports 3.7V Li-ion battery power input)
- Operating voltage: 3.3V.
SKU: n/a -
-
Raspberry Pi Hats
Waveshare A7600C1 LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
Raspberry Pi HatsWaveshare A7600C1 LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
SKU:- LTE Cat-1 HAT for Raspberry Pi enabling 4G and 2G communication.
- Supports TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL protocols.
- Features dial-up, telephone call, SMS capabilities for versatile communication.
- LTE-FDD: B1/B3/B5/B8
- LTE-TDD: B34/B38/B39/B40/B41
- 2G:GSM/GPRS/EDGE: 900/1800 MHz
- SMS:Supported types: MT, MO, CB, Text, PDU
SKU: n/a -
-
Raspberry Pi Hats
Waveshare UPS HAT (E) for Raspberry Pi, Supports 4× 21700 Li batteries (NOT included), Bi-Directional Fast charging, 5V 6A Output, Pogo Pins Connector, Raspberry Pi UPS
Raspberry Pi HatsWaveshare UPS HAT (E) for Raspberry Pi, Supports 4× 21700 Li batteries (NOT included), Bi-Directional Fast charging, 5V 6A Output, Pogo Pins Connector, Raspberry Pi UPS
SKU:- Uninterruptible Power Supply: Ensures Raspberry Pi stays powered during outages.
- Fast Charging: Simultaneous charging and output.
- Battery Monitoring: Displays status and auto-shuts down to prevent data loss.
- Safety Protection: Guards against incorrect connections.
SKU: n/a -
-
Raspberry Pi Hats
Geekworm X1015 PCIe toM.2 Key-M NVMe SSD PIP TOP for Raspberry Pi 5
SKU:- Compatibility: Raspberry Pi 5
- M.2 SSD Support: Up to 4TB, sizes 2280, 2260, 2242, 2230
- Data Transfer: Up to 8Gbps (PCIe 3.0)
- Power Supply: Up to 3A via GPIO and FFC
- LED Indicators: Power and activity status
SKU: n/a -
-
Raspberry Pi Hats
Waveshare Serial Bus Servo Driver HAT, Integrates ESP32 and Servo Control Circuit, Suitable for ST / RSBL Series Serial Bus Servos
Raspberry Pi HatsWaveshare Serial Bus Servo Driver HAT, Integrates ESP32 and Servo Control Circuit, Suitable for ST / RSBL Series Serial Bus Servos
SKU:- Controller: ESP32-WROOM-32
- Power Supply Port: XT60 connector, 5.5×2.5 mm DC jack
- Power Supply: 9~25V (the input voltage and the servo voltage must be matched)
- Communication Interface: UART, USB Type-C port × 2
- Wireless Communication: 2.4G WiFi
- Mounting Hole Diameter: 3 mm
- Mounting Hole Spacing: 58×49 mm
- PCB Size: 65×57 mm
SKU: n/a -
Raspberry Pi Hats
Waveshare PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HAT
Raspberry Pi HatsWaveshare PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HAT
SKU:- PCIe Mode: PCI-E×1 Gen2
- Compatibility: Raspberry Pi 5B
- USB Ports: 3 x USB 3.2 Gen1
- Ethernet Port: Gigabit
- Power Control: USB interface
- Standard: HAT+
SKU: n/a -
Raspberry Pi Hats
Compute Module IO Board Plus, for Raspberry Pi CM4S / CM3 / CM3L / CM3+ / CM3+L
SKU:- Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation.
- Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
- Arduino connectivity also supports Arduino shields.
- 1-WIRE interface, for connecting single-bus devices like DS18B20.
- 4 x keys, 4 x LEDs, and 1 x Buzzer, for I/O testing.
SKU: n/a -
Raspberry Pi Hats
UCTRONICS PoE HAT for Raspberry Pi , IEEE 802.3af- Compliant, 5V 2.5A Power Over Ethernet Board for Ras berr Pi 4B/3B+
Raspberry Pi HatsUCTRONICS PoE HAT for Raspberry Pi , IEEE 802.3af- Compliant, 5V 2.5A Power Over Ethernet Board for Ras berr Pi 4B/3B+
SKU:- Product: UCTRONICS PoE HAT for Raspberry Pi , IEEE 802.3af- Compliant
- Supports Standard: IEEE 802.3af- Compliant
- Output Voltage (VDC): 5
- Total Power Dissipation: 12.5
SKU: n/a -
Raspberry Pi Hats
Waveshare Pioneer600, Raspberry Pi Expansion Board
SKU:- AD/DA IO interface :Â screw terminal
- 1-WIRE interface :Â for connecting 1-WIRE devices like DS18B20
- Sensor interface :Â for connecting various sensors
- 0.96inch OLED : SSD1306 driver, 128×64 resolution, SPI interface
- Buzzer
- CP2102 :Â USB TO UART converter
- PCF8591 :Â 8-bit AD/DA converter, I2C interface
SKU: n/a -
-
Raspberry Pi Hats
Geekworm X872 V2.0 M.2NVME SSD Storage Expansion Board for Raspberry Pi 4
SKU:- Model: X872 V2.0
- Compatibility: Raspberry Pi 4 Model B
- SSD Support: Up to 4TB, M.2 NVMe sizes (2280, 2260, 2242, 2230)
- Data Transfer: USB 3.1 Gen1, up to 5Gbps
- Boot Capability: Supports booting OS from SSD
SKU: n/a -
Raspberry Pi Hats
Geekworm X1300-A2 I2S Audio Accessory Auxiliary Board for X1300 / X630
SKU:- HDMI Audio Capture: Enables audio via I2S.
- No Soldering: Easy installation.
- Advanced Features: HDMI cable detection and interrupts.
- Compact & Stackable: Fits under other HATs.
- Compatibility: Works with X1300 and X630 shields.
SKU: n/a -
-
-
Raspberry Pi Hats
Waveshare PCIe to MiniPCIe / Gigabit Ethernet / USB 3.2 Gen1 HAT for Raspberry Pi 5, Supports MiniPCIe interface 4G Module, High-speed Networking, Raspberry Pi 5 HAT
Raspberry Pi HatsWaveshare PCIe to MiniPCIe / Gigabit Ethernet / USB 3.2 Gen1 HAT for Raspberry Pi 5, Supports MiniPCIe interface 4G Module, High-speed Networking, Raspberry Pi 5 HAT
SKU:- Operating system: Windows / Linux / Android
- Antenna interface: IPEX-1 connector (LTE main antenna + LTE diversity antenna + GNSS antenna)
- Power supply: 3V to 3.6V
- Operating temperature: -40℃ ~ +80℃
- Form factor: Mini-PCIe
SKU: n/a -
Raspberry Pi Hats
Waveshare Compute Module IO Board with PoE Feature, Composite Breakout Board for Developing with Raspberry Pi CM4S / CM3 / CM3L / CM3+ / CM3+L
Raspberry Pi HatsWaveshare Compute Module IO Board with PoE Feature, Composite Breakout Board for Developing with Raspberry Pi CM4S / CM3 / CM3L / CM3+ / CM3+L
SKU:- PoE power input: 37V ~ 57V DC in
- PoE power output: 5V 2.5A DC out
- Network standard: 802.3af PoE standard
- Power supply micro USB port / PoE Ethernet port
SKU: n/a -
-
-
Raspberry Pi Hats
Geekworm X1202 4-Cell 18650 5.1V 5A UPS HAT for Raspberry Pi 5 Series
SKU:- Power input: 6-18Vdc via DC5521 Jack or 5Vdc 5A via USB Type-C
- UPS output: 5.1V ±5% Max 5A
- Battery charging current: Max 2.3-3.2A
- Terminal Battery Voltage: 4.23V
- Battery Recharge Threshold: 4.1V
- PCB Size: 97.4mm x 85mm
SKU: n/a -
Raspberry Pi Hats
Waveshare Cat-1/GNSS HAT for Raspberry Pi, Based On SIM7670G module, Global Multi-band LTE 4G Cat-1 support, GNSS positioning, 3x USB 2.0 extended ports
Raspberry Pi HatsWaveshare Cat-1/GNSS HAT for Raspberry Pi, Based On SIM7670G module, Global Multi-band LTE 4G Cat-1 support, GNSS positioning, 3x USB 2.0 extended ports
SKU:- Product:Â Cat-1/GNSS HAT
- Power supply: 5V
- Logic level: 3.3V
- Data transmission: ≤5Mbps (UL) / ≤10Mbps (DL)
- GNSS: GPS, GLONASS, Galileo, BeiDou
SKU: n/a -
-
Boards Compatible with Arduino, Raspberry Pi Hats
Waveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
Boards Compatible with Arduino, Raspberry Pi HatsWaveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
SKU:- Power Input: 5V
- CM4 Socket: suitable for all variants of Compute Module 4
- Connector: M.2 M KEY slot, for connecting communication module or NVME SSD; Arduino compatible GPIO header
- USB: USB 2.0 Type A x 1
- Camera: MIPI CSI-2 × 1 (15pin 1.0mm FPC connector)
SKU: n/a