Compatible with Arduino Boards
Showing 145–192 of 219 results
-
-
Kits compatible with Arduino
Arduino Nano 3.0 Beginners Kit
SKU:- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by Robu.in.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
SKU: n/a -
Boards Compatible with Arduino
Mega R3 Android Accessory Development Kit (ADK) + USB Cable
SKU:- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
SKU: n/a -
Shield for Arduino
ESP8266 Web Server Serial WiFi Extension Board Shield ESP-13
SKU:- Wifi protocol: 802.11 b/g/n
- STA/AP: work mode
- Integrated TCP/IP stack: support one socket
- Work as TCP/UDP Server or Client mode
- Serial port baud rate： 1200/2400/4800/9600/19200/38400/57600/74800/ 115200 bps
SKU: n/a -
Kits compatible with Arduino
Plusivo Wireless Super Starter Kit with ESP8266 (Programmable With Arduino IDE)
Kits compatible with ArduinoPlusivo Wireless Super Starter Kit with ESP8266 (Programmable With Arduino IDE)
SKU:- A basic beginner kit with all the necessary components to jumpstart your interest in learning and making your own projects.
- A complete starter kit that includes a development board fully compatible with ESP8266.
- A premium kit with detailed instructions in a high-quality storage box.
- All you want, all you need and all you desire with the Plusivo ESP8266 kit.
See the description for more details about the product.
SKU: n/a -
-
-
Kits compatible with Arduino
ORANGE Intermediate Kit For Arduino Mega
SKU:- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by Robu.in.
- All-in-one kit, a great starter kit for learning to code.
SKU: n/a -
-
Shield for Arduino
Cytron XBee Shield
SKU:-
Mounts directly onto your Arduino
-
DIN and DOUT pins of XBee can be connected to either the USB’s UART pins or another digital pin on the Arduino (D0, D1, D2, D3, D8, D9, D10, D11)
-
3.3V power regulation and proper level shifting on-board communication between 5V and 3.3V
-
Extra 0.1″ spaced prototyping holes
-
Reset button brought out to shield
-
Power, DIN, DOUT, RSSI, and DIO5 indicator LEDs
SKU: n/a -
-
Boards Compatible with Arduino
Adafruit Feather M4 Express – Featuring ATSAMD51 – ATSAMD51 Cortex M4
SKU:- ATSAMD51 32-bit Cortex M4 core
- 512 KB flash, 192 KB RAM
- 3.3V regulator with 500mA peak current regulator
- USB bootloader and serial port debugging
- Built-in 100mA lipoly charger with charging status indicator LED
SKU: n/a -
-
Case for Arduino
White UNO R3 Injection Molding Case with Bubble
SKU:- For Arduino UNO R3 Development Board only.
- To protect your little computer against damage, dust, and scratches Clear the Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a -
Boards Compatible with Arduino
Adafruit ESP32 Feather V2 – 8MB Flash + 2 MB PSRAM – STEMMA QT
SKU:- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual-mode Bluetooth (classic and BLE)
- On-board PCB antenna
- Ultra-low noise analog amplifier
SKU: n/a -
Bluetooth and NRF Modules, Compatible with Arduino Boards
BLE Nano Integrated CC2540, Bluetooth Module with, Soldering
Bluetooth and NRF Modules, Compatible with Arduino BoardsBLE Nano Integrated CC2540, Bluetooth Module with, Soldering
SKU:BLE chip: TICC2540Working channel: 2.4GInterface: Micro-USBInput voltage: Micro-USB power supply, Vin6~12V, 5VMicroprocessor: ATmega328P-MU QFN32Bootloader: Latest arduino1.8.8Pin: two rows 2.54mm-15PinSKU: n/a -
Shield for Arduino
PS2 Controller Starter Kit
SKU:- Stable 5V powered, low current consumption, less than 150mA.
- 1 standard PS2 controller socket.
- Communicate with host microcontroller through 5V TTLÂ UART.
- Simple inquiry command and button status feedback for the host process.
- Vibrator motor is controllable.
- Wired or wireless PS2 controller is fully compatible.
- A small LED as the indicator for communication between SKPS and PS2 controller.
SKU: n/a -
-
Boards Compatible with Arduino
Adafruit Metro Mini 328 – Arduino-Compatible – 5V 16MHz
SKU:- 5V logic with 3.3V compatible inputs can be converted to a 3.3V logic operation
- 32KB Flash Memory – 0.5K for bootloader
- Four indicator LEDs
- Easy reprogramming
- 31.5KB available after bootloading
- 16MHz Clock Speed
SKU: n/a -
Kits compatible with Arduino
ESP8266 Weather Station Kit for Arduino IDE IoT Starter
SKU:- ESP8266:CP2102 chip inside, Micro USB,4MB flash, full I/O port and wireless 802.11 supported IOT platform Arduino compatible.
- DHT11 Sensor: A digital signal output with a calibrated temperature and humidity combined sensor. The simple communication protocol greatly reduces the programming effort required
- BMP180:high-precision, small size, ultra-low power 3μA pressure sensor. Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa.Can directly through the I2C bus connected with a variety of microprocessors. Pressure range: 300 ~ 1100hPa.
SKU: n/a -
-
Shield for Arduino
SHIELD-EKG-EMG
SKU:- Stackable connectors – up to 6 channels can be stacked and wired to A0-A6 analogue inputs
- Calibration signal generation by D4/D9 digital output
- Precise trimmer potentiometer for calibration (all boards are shipped completely assembled, tested and calibrated so that you don’t have to do this unless you want to see how things works)
- Input connector for standard or active electrodes
- Works with both 3.3V and 5V Arduino boards
SKU: n/a -
-
Shield for Arduino
Arduino Nano PRATHAM 1.0 Development Board
SKU:- On-board ON/OFF switch and power LED
- Onboard Voltage Regulator for stable power supply
- Arduino Nano compatible (direct plug-in for Arduino Nano board)
- On-board direct plug-in for 16X2 Liquid Crystal Display with contrast adjustment
- On-board L293D Motor Driver chipset
- I2C communication pins available for IMU Sensor
- Pin header to connect Line Follower Sensor (up to an array of 6) with power pins
SKU: n/a -
Shield for Arduino
Colorduino LED RGB Dot Matrix Driver Board with 5mm 8*8 RGB LED for Arduino
SKU:- 8bits colors support with 6bits correction for each color in every dots
- Hardware 16MHz PWM support
- 24 constant current channels of 100mA each
- Current Consumption(Except LED matrix): 20mA typical (40mA maximum)
- Drive current(Every channel):Â 500mA
- Drive current(Every dot) :Â 58mA
SKU: n/a -
-
Case for Arduino
Red UNO R3 Injection Molding Case with Bubble
SKU:- For Arduino UNO R3 Development Board only.
- To protect your little computer against damage, dust, and scratches Clear the Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a -
Boards Compatible with Arduino
Adafruit Trinket M0 – for use with CircuitPython & Arduino IDE
SKU:- Same size, form factor, and pinout as a classic Trinket
- Updating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+
- 256KB Flash – 32x as much as 8 KB on ATtiny85
- 32 KB RAMÂ – 64x as much as 512 bytes on ATtiny85
- 48 MHz 32-bit processor – 6x as fast as ATtiny85 (not even taking into account 32-bit speedups)
- Native USB supported by every OS
SKU: n/a -
Shield for Arduino
Cytron Easy MP3 Shield
SKU:-
Onboard high-quality MP3 decoder.
-
Onboard dual channel/Stereo 3W differential audio amplifier for an external speaker.
- A MicroSD status LED.
-
Onboard stereo 3.5mm audio jack socket for earphones.
-
Onboard microSD socket for MP3 audio files storage.
-
The interface from Arduino, UART, selectable to use soft serial.
-
Stackable side headers.
- Supply voltage: 5V.
SKU: n/a -
-
Kits compatible with Arduino
Arduino UNO R4 WiFi Beginner Kit
SKU:- Great for Starting with Arduino Programming
- Various components are included in this pack to try out different projects.
- The kit comes with quality components assured by Robu. in.
- All-in-one kit, a great starter kit for learning to code.
- Arduino UNO R4 WiFi Beginner Kit
SKU: n/a -
-
Boards Compatible with Arduino
Seeeduino V4.3 (ATMega328P) Development Board
SKU:- ATmega328P microcontroller
- Arduino UNO bootloader
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP Header
- Arduino UNO-R3 Shield Compatible
- Micro USB programming and power supply
- 3 on-board Grove connectors
- 3.3/5V system operation power switch
SKU: n/a