Compatible with Arduino Boards
Showing 97–144 of 219 results
-
Shield for Arduino
HACK AF L293D Motor Driver/Servo Shield for Arduino Nano
SKU:- Pin compatible with Adafruit Motor Shield
- Pin header to connect sensors and actuators.
- 4 H-Bridges L293D chipset.
- Surg Current Protection for IC L293D.
- Onboard On/Off Switch.
- Drive 4 bi-directional DC motors
- Drive 2 Servo motors (unipolar or bipolar)
- On-board slot to connect HC-05/HC-06 Bluetooth modules for Wireless control via Smartphone
SKU: n/a -
-
-
-
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M Black- Standard version
SKU:- ATmega328 running at 16MHz with external resonator (0.5% tolerance).
- 100% Arduino compatible board.
- Max Output Current: 150mA.
- 0.8mm Thin PCB.
- USB connection off-board.
- Supports auto-reset.
- Onboard Power and Status LEDs.
SKU: n/a -
Shield for Arduino
SeeedStudio Grove Beginner Kit for Arduino
SKU:- Operating voltage: 5 V
- Tutorials for guidance
- Fully compatible with Arduino UNO
- High performance, low power 8 bit ATmega328 MU microcontroller
- Serial converter CP2102N chip (to communicate the Seeeduino with a computer by using a micro-USB cable)
- 2 on-board Grove connectors
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog inputs
- ISP header
- Arduino UNO-R3 shield compatible
- Micro USB programming and power supply
- Supports Windows, Mac OS, and Linux
SKU: n/a -
-
Cables for Arduino, Interfacing and USB Cables
1.5 Meter Male 3.5mm to 3-RCA AV Cable
SKU:- 3.5mm jack plug to 3 X RCA plugs cable, male to male.
- Three standard RCA “R-AUDIO-L, VIDEO” (red-white-yellow) male connectors.
- Ideal for connecting your camcorder/DV to your TV set or VCR for video and stereo audio playback.
- Suitable for High-Performance Video and Audio Playback.
- Fits a wide range of products that require 3.5mm cables.
SKU: n/a -
Kits compatible with Arduino, Orange Kits for Arduinos
ORANGE Starter Kit For Arduino Nano
SKU:- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by Robu.in.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
SKU: n/a -
Case for Arduino
Blue UNO R3 Injection Molding Case with Bubble
SKU:- For Arduino UNO R3 Development Board only.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a -
Case for Arduino
Transparent White UNO R3 Injection Molding Case with Bubble
SKU:- For Arduino UNO R3 Development Board only.
- To protect your little computer against damage, dust, and scratches Clear the Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a -
-
Case for Arduino
White ABS Plastic Case for UNO R3
SKU:- Made of high quality ABS plastic, provide good protective
- For Arduino UNO R3 Development Board only.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a -
Audio Amplifier Module, Shield for Arduino
VS1053 MP3 Recording Module Development Board with Onboard Recording Function
Audio Amplifier Module, Shield for ArduinoVS1053 MP3 Recording Module Development Board with Onboard Recording Function
SKU:- SPI interface, the control signal lines are led out
- A headphone and stereo output
- Onboard Microphone for recording
- A line-in input interface
- Separate 3.5 mm Jack for MIC and Speaker
- Onboard Power Indicator
- 3.3V and 2.8V of LDO chip AMS-1117 on board provides up to 800mA current
SKU: n/a -
Boards Compatible with Arduino
STMICROELECTRONICS NUCLEO-L476RG Development Board, STM32L476RG MCU, On-Board STLINK/V2-1, Arduino & ST Morpho Connectivity
Boards Compatible with ArduinoSTMICROELECTRONICS NUCLEO-L476RG Development Board, STM32L476RG MCU, On-Board STLINK/V2-1, Arduino & ST Morpho Connectivity
SKU:- Model: STM32 Nucleo-64 boards
- Crystal oscillator: 32.768 kHz
- Board-specific features: 24 MHz or 48 MHz HSE
- Flexible power-supply options: ST-LINK USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration
SKU: n/a -
-
Compatible with Arduino Boards
SeeedStudio Grove Shield for Seeeduino XIAO
SKU:- Power Supply: 5V / 3.7V Lithium Battery
- Load Capacity: 800mA
- On-board Lithium Battery Charging and Management Function
- Grove connectors (Grove IIC*2, Grove UART*1), all 14 GPIO led out
- Compact and Breakable Design
SKU: n/a -
-
-
Kits compatible with Arduino
Plusivo UNO R3 Super Starter Kit
SKU:- Comes with a detailed and user-friendly tutorial: Free PDF tutorial with more than 22 lessons available for download
- A great way for the beginners to get started with Arduino programming
- All modules are ready to use, no soldering needed
See the Description for more details about the product.
SKU: n/a -
Kits compatible with Arduino
Basic learning kit for Arduino Mega
SKU:- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by Robu.in.
- All-in-one kit, a great starter kit for learning to code.
- All Basis component to start is covered in kit
- You can create 15 different projects from this kit
SKU: n/a -
-
Case for Arduino
Blue Transparent ABS Case for Mega 2560
SKU:- Made of high-quality ABS plastic, provide good protective
- For Arduino Mega 2560 Development Board only.
- To protect your little computer against damages, dust, and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a -
Boards Compatible with Arduino
DFRobot Gravity: I2C 4-20mA DAC Module (Arduino Compatible)
SKU:- Chip Type: GP8302
- Input Signal Range: 12Bit, 0x000-0xFFF (0-25mA)
- Input I2C Signal High Level: 2.7V-5V
- Power Supply: 18V-24V (24V recommended)
- Accuracy: 0.5% before calibration, 0.2% after calibration
SKU: n/a -
Shield for Arduino
XD-216 Screw shield Screw Shield V1 Expansion Board
SKU:- Size: 29 x 71 mm
- Combines the function of Arduino Screw Shield and Sensor Shield.
- Expand all of IO interfaces from Arduino.
- 3-Pin male headers for easy sensor/servo connection.
- The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient.
SKU: n/a -
-
-
Boards Compatible with Arduino
Wemos TTGO Xi 8F328P-U Board For Arduino Nano V3.0 Promini
SKU:- It comes with USB and is more convenient to use.
- The 8F328D can be powered by 3V3 and 5V, operating at 16M frequencies with excellent levels of compatibility.
- Built-in high precision RC, without external crystal oscillator, can be stable operation.
- Less peripheral parts, simple circuit design.
SKU: n/a -
-
-
Kits compatible with Arduino
Beginner Kit for Arduino Mega
SKU:- Model: Beginner Kit for Arduino Mega
- MEGA 2560 board like Joystick.
- Fun way to expand your knowledge.
- Beginners can learn the basics of Arduino programming as well as the expert in programming.
- kit includes everything you need to get started.
SKU: n/a -
Shield for Arduino
Cytron G15 Shield
SKU:-
Arduino reset button
-
4 x G15 Cube Servo ports.
-
External power port for a servo with polarity protection
-
Stackable I/O header pin
-
Selectable digital pins for the control pin with mini jumpers
-
TX and RX indicator LEDs to show communication activities, only on Rev2.0.
-
Selectable Serial pins, Either hardware serial or software serial via mini jumpers, only on Rev2.0
SKU: n/a -
-
Boards Compatible with Arduino
STMICROELECTRONICS Development Board, STM32F091RC MCU, mbed Enabled, Arduino Uno V3 and ST Morpho Connectivity
Boards Compatible with ArduinoSTMICROELECTRONICS Development Board, STM32F091RC MCU, mbed Enabled, Arduino Uno V3 and ST Morpho Connectivity
SKU:- Model: STM32F091RC MCU
- Flexible board power supply: USB VBUS or external source (3.3 V, 5 V, 7 – 12 V)
- Supported by wide choice of Integrated Development Environments (IDEs) including IAR , Keil , GCC-based IDEs
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector.
- Low power consumption
SKU: n/a -
LORA Module, Shield for Arduino
Wireless Transmitter 915Mhz, Lora Shield for Leonardo,, UNO, Mega2560,, Duemilanove, Due
LORA Module, Shield for ArduinoWireless Transmitter 915Mhz, Lora Shield for Leonardo,, UNO, Mega2560,, Duemilanove, Due
SKU:- 168 dB maximum link budget.
- +20 dBm – 100 mW constant RF output vs.
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
SKU: n/a -
Cables for Arduino, Interfacing and USB Cables
Cable For Arduino Nano USB A to MINI B (Gold Plated Connector)
Cables for Arduino, Interfacing and USB CablesCable For Arduino Nano USB A to MINI B (Gold Plated Connector)
SKU:- USB Type: Type-A to Mini-B
- Weight: 100 gm.
- Length: 1.5 m.
- Gold Plated Connector
- Exclusively designed for Arduino boards.
- These fully rated Mini-USB cables provide transfer rates up to 480 Mbps.
SKU: n/a -
Boards Compatible with Arduino
Adafruit Feather RP2040
SKU:- RP2040 32-bit Cortex M0+ dual-core running at ~125 MHz
- 8 MB SPI FLASH
- Built-in 200mA+ lipo charger
- On-board STEMMA QT / Qwiic connector
- 3.3V regulator with 500mA peak current output
- USB Type C connector
- 264kB on-chip SRAM
- 21 x Multifunction GPIO
- 3.3V regulator with 500mA peak current output
SKU: n/a -
Shield for Arduino
SmartElex PS2 Sheild for Arduino
SKU:- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode. (Default)
- A status LED
- Jumper selector to select different UART Baud Rate (74880 (Default), 9600, 57600, 115200). Default: – when no jumper is attached.
- Jumper selectors to select different digital pin as UART – TX and RX pin.
SKU: n/a