Advance Development Boards

1. Compatible With: BBC Micro: Bi
2. Accessory Type: Extension Board
3. 5V 1A supply for the greater driving force
4. 3.3V and 5V interface
5. Support 3V5V sensor module
6. Micro: bit all pins lead
7. 3.5mm audio connector
8. Builtin buzzer (switch switching)
9. 5V 1A self-recovery fuse

1. Onboard EPM240T100C5N chip
2. EPROM chip configuration using EPCS4, the size of 8Kbit
3. Onboard 50M active patch crystal (Crystal Slaughter halfback)
4. Power supply with a largemouth outlet, single 5V power supply
5. Board has a power indicator and resets switch

1. Expansion Board Type: T-type GPIO Board
2. GPIO Pins: 21 GPIO Pins
3. Dimensions: 7 x 1.5 x 6.5cms
4. Connection type: 0.1-inch space headers
5. Mounting Holes: M3

1. Scratch Resistant
2. Provides Access to All Ports
3. High-Quality Silicone
4. Color: Random

1. Based on EP4CE10 FPGA Chip
2. Data Rates up-to 3.125GBPS
3. Up-to 150K Logic Elements
4. Up-to 6.3MB Embedded Memory
5. Rate Matching FIFO

1. Microcontroller Chip: RP2040
2. Flash Memory:16 MB
3. SRAM:264 KB
4. Weight:7 gm

1. Google Edge TPU ML accelerator
   ○ 4 TOPS total peak performance (int8)
   ○ 2 TOPS per watt
2. Integrated power management
3. PCIe Gen2 x1 interface
4. Available in M.2-2280-B-M-S3 (B+M key)
5. Operating temp: -20 to +85 °C

1. Supports Wi-Fi, USB host and SD cards
2. Pin-out for PWM, I2C, SPI, UART, Ethernet, and I2S
3. Open hardware board reference design including schematics, layouts and pin details
4. Single input single output (1T1R) Wi-Fi 802.11 b/g/n.
5. Pin-out for GPIO, I²C, I²S, SPI, UART, PWM and Ethernet Port.
6. 580 MHz MIPS CPU.
7. 32MB Flash and 128MB DDR2 RAM.
8. USB host.
9. Micro SD slot.

1. High-Quality Construction
2. Compatible With Micro: Bit Development Board
3. Easy to Assemble
4. Comes with 2 AAA Battery Holder for Powering the Micro: Bit Board

1. Google Edge TPU ML accelerator
   ○ 4 TOPS total peak performance (int8)
   ○ 2 TOPS per watt
2. Integrated power management
3. PCIe Gen2 x1 interface
4. Available in M.2-2230-A-E-S3 (A+E key)
5. Operating temp: -20 to +85 °C

1. CPU :Allwinner H616, quad core Cortex-A53
2. GPU :Mali G31 MP2, also supports OPENGL3.2
3. RAM : 1GB DDR3L SDRAM
4. Screen : supports HDMI2.0A, 4K display
5. Interface :USB2.0
6. Network Connection :100M Ethernet + 100M WiFi

1. Hardware interface: M.2 E key (M.2-2230-D3-E)
2. Serial interface: Two PCIe Gen2 x1
3. Operating voltage: DC supply 3.3 V +/- 10 %
4. 2x Google Edge TPU ML accelerator: 8 TOPS total peak performance (int8), 2 TOPS per watt
5. Integrated power management

1. Product: Arduino Portenta C33
2. Operating Temperature (°C): -40 to 85
3. External Memories: 16 MB QSPI Flash

1. Debugger: USB-JTAG
2. Interfaces: 3 PMOD interfaces, 40P pin header
3. Supported Modules: HDMI, Gamepad, LED, SDRAM, dual DVP camera
4. Board Type: Modular dock board

SoM Board

1. FPGA: Gowin GW5A-LV25MG121
2. Memory: 64Mbit SPI FLASH
3. GPIOs: 76
4. Interface: 4-lane MIPI D-PHY
5. Power Outputs: 3

Dock Board

1. Debugger: USB-JTAG
2. Interfaces: 3 PMOD, 40P pin header
3. Module Compatibility: HDMI, Gamepad, LED, SDRAM, dual DVP camera
4. Power Input: 5V

Specifications:

Logic Analyzer:

Maximum Channel Number: 8CH
Maximum Sampling Rate: 80M
Transmission Bandwidth: 320Mb/s
Sampling Mode: Stream
Typical Configuration: 80M@4CH, 40M@8CH
Signal Input Range: 0～3.6V
High and Low Level Thresholds: VIH>2V, VIL<0.8V
Windows Environment Bandwidth: 160Mb/s
CKLink Debugger:

JTAG Clock Rate: 16M
Typical Dump Speed: 1200KB/s
Debug Serial Port: Up to 20Mbps
DAPLink Debugger:

Debug Serial Port: Up to 20Mbps
Typical Burning Speed: 110KB/s
USB2UART:

High Speed Four Serial Ports
Maximum Baud Rate: 2x20Mbps + 2x1Mbps
Total Bandwidth: 42Mbps