IoT Development Boards

1. Onboard CAN transceiver SN65HVD230
2. Powered from 3.3V
3. Features ESD protection
4. Connecting MCUs to the CAN network
5. Compatible with PCA82C250

1. Based on ESP32 240MHz Xtensa dual-core 32-bit microprocessor
2. Operating Voltage: 2.7V – 4.2V
3. Working Current: 60mA
4. Battery Charging Current: 500mA

1. ESP32-­PICO-­V3-­02-Base，support WiFi
2. Built-in 6-Axis IMU
3. IR transmitter
4. Microphone
5. RTC
6. Buttons, LCD(1.14 inch)
7. Built-in Lithium Polymer Battery@200mAh
8. Extendable Socket
9. Built-in Passive Buzzer

1. Board Based On AI-Thinker A9 GPRS Module
2. Supports Firmware Upgrade Via Serial Port
3. Operating Voltage: 5v

1. Tool Is For Evaluation Of: ESP32-S3-WROOM-1
2. Protocol Supported: 802.11 b/g/n
3. Frequency: 2.4 GHz
4. Operating Supply Voltage: 3.3 V, 5 V

The Black ESP32-DEVKITC Development Board Backboard is an accessory designed to support and facilitate the use of the ESP32-DEVKITC development board. It serves as a backboard or mounting platform for the ESP32-DEVKITC, providing stability and possibly additional features or connections for ease of use during development or testing processes.

1. Dual-Core Processor: dual-core Tensilica LX6 microcontroller
2. Wireless Connectivity: 2.4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 4.2
3. Rich Peripheral Set: GPIO pins, analog-to-digital converters (ADCs),
4. Secure Boot and Flash Encryption: The ESP32-WROOM-3 2E includes secure boot and flash encryption features to protect your firmware and data.

1. Processor: 32 Bit RISC -V single Core
2. Clock Frequency: 160Mhz
3. WIFI: IEEE 802.11 b/g/n 2.4Ghz + BLE 5
4. SRAM: 400KB (16KB Cache)

1. WiFi+Bluetooth 4.0 Dual-mode Module
2. GDI Display Port, easy to connect
3. Operating Voltage: 3.3V
4. Input Voltage: 3.3V~5.5V
5. Support Low-Power: 10uA
6. ESP32 Dual-core low power main controller, 10uA power consumption

1. Processor: ESP32-C6 SoC with two 32-bit RISC-V processors (High-Performance and Low-Power).
2. Memory: 512KB SRAM and 4MB Flash on-chip.
3. 2.4GHz Wi-Fi 6 (802.11ax)
4. Bluetooth 5.0 (LE)
5. Zigbee
6. Thread (802.15.4)

1. Adopts ESP32-S3R2 as the main chip.
2. Comes with an Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz.
3. Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash memory.
4. Type-C connector, easier to use.

1. ESP32-S2-WROVER with 2 MB PSRAM.
2. Pin Headers
3. 3.3 V Power On LED
4. USB-to-UART Bridge
5. Reset Button: Reset button.
6. Micro-USB Port:
7. Boot Button
8. RGB LED

1. Supply Voltage: 5V
2. GPIO Pins: 30
3. Connectivity: Bluetooth+WiFi
4. Flash Memory:  4MB (32Mbits)
5. WiFi frequency: 2.4GHz
6. USB Type-C connector

1. Processor: 32 Bit RISC-V Single Core
2. Clock Frequency: 160Mhz
3. WIFI: IEEE 802.11 b/g/n 2.4Ghz + BLE 5
4. SRAM: 400KB (16KB for Cache)
5. ROM: 384KB

1. The module is safe, reliable, and scalable to various applications
2. The expansion board adopts a double-layer design, with a pin on both sides
3. Good stability and high reliability

1. Model: ESP32
2. Color: Green
3. Pins: 30
4. PCB material: high-quality FR-4 material
5. PCB layers: 2 layers

1. Microcontroller: ESP32-WROVER-E
2. USB to UART Chip: CH340
3. Connector Type: Gold pin (2.54 mm pitch)
4. USB Connector: Micro USB
5. Buttons: Integrated for additional communication
6. LEDs: Integrated for status indication

1. Operating Voltage: 2.2 to 3.6VDC
2. Ultra-low power consumption
3. 32 GPIO: ADC(16), SPI(2), I2C(1), UART(1), PWM(32), SDIO(50 Mhz)
4. 520 KB SRAM, 16 MB Flash, 1A output
5. Overcharge protection
6. Over-discharge protection
7. Full ESP32 pins break out
8. 29.22mm x 98.58mm x 17.22mm

1. Input Voltage (V): DC4.2V
2. Standby current(mA): 0.00026
3. Battery Capacity (mAh): 120mAh+1400mAh
4. Product Weight (g): 92.8g

1. Brand: M5 Stack
2. Model: C3
3. Product: Mate with Pin Headers
4. Voltage: 5V
5. Peak temperature = 230℃
6. Weight: 3.8g

1. Microcontroller: ESP32 dual-core 32-bit microcontroller ,Xtensa LX6 CPU
2. Wireless Connectivity: Wi-Fi 802.11b/g/n (2.4 GHz).
3. Bluetooth Connectivity: Bluetooth Classic (BT) and Bluetooth Low Energy (BLE) support
4. Camera Module: OV2640 image sensor