Our Bluetooth and NRF Modules category offers a comprehensive selection of cutting-edge wireless communication solutions. Featuring a series of HC-02, HC-04, HC-05, HC-06, HC-08, and HC-45 NFR modules, as well as a wide range of Bluetooth and NFC modules, we cater to diverse connectivity requirements.
These modules enable seamless data transmission, establishing robust connections between devices and facilitating wireless communication. With advanced Bluetooth technology, these modules provide reliable and secure connections, allowing for efficient data exchange across various applications.
Whether you’re designing IoT devices, wireless sensors, or smart home systems, our Bluetooth and NRF Modules offer a versatile solution for enabling wireless connectivity and unlocking the potential of the Internet of Things (IoT).
Bluetooth and NRF Modules
Showing 1–48 of 61 results
-
-
Bluetooth and NRF Modules
HC-05 TTL Bluetooth Transceiver Module (Without Button)
SKU:- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution
- Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes
- Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support
- Incredible small size with 3.3V input, and RoHS Compliant
- UART interface and with baud rate setup function
SKU: n/a -
Bluetooth and NRF Modules
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
SKU:- Bluetooth Protocol: Bluetooth Specification V4.0 BLE
- USB Protocol: USB V2.0
- Operating Frequency: 2.4GHz ISM band
- Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
- Transmitting Power: ≤4dBm
- Sensitivity: ≤-84dBm at 0.1% BER
- It’s easy to use and completely encapsulated.
- You can set it as slave or master.
- You can use AT command set the baud rate.
SKU: n/a -
-
-
-
-
-
Bluetooth and NRF Modules
HC-06 4pin Bluetooth Module (Slave) No Button
SKU:- Bases at CSR BC04 Bluetooth technology.
- with build-in 2.4GHz PCB antenna
- It’s at the Bluetooth class 2 power level.
- Range test: 10 meters
- Operating voltage: 3.3V to 6V DC
- Operating current in pairing is in the range of 30~40mA.
SKU: n/a -
Bluetooth and NRF Modules
HC-06 6Pin Bluetooth Module Without Button
SKU:- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
SKU: n/a -
Bluetooth and NRF Modules
RF Nano Integrated NRF24L01 Wireless Module with Soldering
SKU:- Microcontroller: ATmega328P
- Â Nrf24L01+ 2.4G wireless
- Â Architecture AVR
- Â Operating Voltage 5 V
- Â Flash Memory 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- Â Clock Speed: 16 MHz
- Â Analog I/O: 8 Pins
- Â EEPROM 1 KB
- Â DC Current per I/O Pins: 40 mA (I/O Pins)
- Â Input Voltage: 7-12 V
- Â Digital I/O: 22 Pins
- Â PWM Output: 6
- Â Power Consumption: 19 m
SKU: n/a -
Bluetooth and NRF Modules
HC-08 4pin Bluetooth Module without Button
SKU:- Bluetooth protocol: V4.0 BLE
- 80 meters of extreme Open space distance communication.
- Based on TI CC2540 chipset
- Bluetooth class 2
- Â Support for on-board applications
-  Operating frequency: 2.4 GHz ISM band
- Â Modulation method: GFSK (Gaussian Frequency Shift Keying
SKU: n/a -
-
-
-
-
Bluetooth and NRF Modules
HM-BT4502 Bluetooth Low Energy (BLE) Pass-through Module
SKU:- Universal serial port design, full-duplex two-way communication, minimum baud rate support 9600 bps
- Default connection interval is 30 millisecond, fast connection
- Support 2M symbol transmission and 244 bytes packet transmission
- Support AT commands for basic settings
SKU: n/a -
-
Bluetooth and NRF Modules
TTGO T-Beam V1.1 ESP32 LORA 433MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
Bluetooth and NRF ModulesTTGO T-Beam V1.1 ESP32 LORA 433MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
SKU:-
Working voltage: 1.8~3.7v
-
Acceptable current:10~14mA
-
Transmit current: 120mA@+20dBm,90mA@+17dBm,29mA@+13dBm
-
Operating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)
-
Transmit power: +20dBm
- 4MB flash memory,
- Low voltage detection, and temperature sensor,
- Fast wake-up and frequency hopping LED signal indicator, and battery with data backup.
SKU: n/a -
-
-
Bluetooth and NRF Modules
Ubertooth One: Wireless Bluetooth Development Platform
SKU:- 2.4 GHz Transmit and Receive.
- Transmit power and receive sensitivity comparable to a Class 1 Bluetooth device.
- Standard Cortex Debug Connector (10-pin 50-mil JTAG)
- In-System Programming (ISP) Serial Connector
- Expansion connector intended for inter-Ubertooth communication or other future uses.
- Six Indicator LEDs
SKU: n/a -
Bluetooth and NRF Modules
HC-02 6pin Bluetooth Module Compatible with HC-05 / HC- 06
SKU:- Working Frequency:Â 2.4G
- Communication Interface:Â UA pin 3.3V TTL level
- Input Voltage: 3.2Â ~ 6V
- Operating Voltage: 3.0 ~ 3.6V
- Communication Level:Â 3.3V
- Transmitted Power: 6dBm (max)
- Reference Distance: 10m
- Air Data Rate: 2Mbps
SKU: n/a -
Bluetooth and NRF Modules
LILYGO T8 V1.7 ESP32 8MB PSRAM TF CARD 3D ANTENNA WiFi &, Bluetooth ESP32-WROVER-Unsoldered
Bluetooth and NRF ModulesLILYGO T8 V1.7 ESP32 8MB PSRAM TF CARD 3D ANTENNA WiFi &, Bluetooth ESP32-WROVER-Unsoldered
SKU:- Brand Name: LILYGO
- Model Number: TTGO T8 V1.7 ESP32
- Compatible Audio and Video Equipment Style: Amplifier
- Weight:9.5g
- Lastest ESP32 Version: REV1
- WIFI & Bluetooth
- 16MB Flash & 8MB PSRAM
SKU: n/a -
Bluetooth and NRF Modules
KN319 Bluetooth 4.2 2 in 1 Receiver and Transmitter RCA 3.5MM AUX Jack
SKU:- Model number: KN319
- BT Version: 5
- Protocol Supported: A2DP, AVRCP (receiver mode only)
- Transmission Distance: 10m / 33ft (open space)
- Battery: Built-in 200mAh Rechargeable Li-polymer battery
- Continuous Use Time: 6 hours (Receiver Mode) / 5 hours (Transmitter Mode) Charging Time
SKU: n/a -
-
Bluetooth and NRF Modules
Bluetooth module HM-BT22014L
SKU:- Working Voltage: 1.71V-3.8V.
- Working Temperature: -20℃~+85℃.
- Modulation Mode: GFSK Gaussian Frequency Shift Keying.
- Modulation Frequency: 2402MHz-2483.5MHz.
- Based on ARM: Cortex-M33 32-bit processor.
- Support BLE: 2.4GHz multi-protocol.
SKU: n/a -
Bluetooth and NRF Modules
Bluetooth module HM-BT2201L
SKU:- Working Voltage: 1.71V-3.8V.
- Working Temperature: -20℃~+85℃.
- Modulation Mode: GFSK Gaussian Frequency Shift Keying.
- Modulation Frequency: 2402MHz-2483.5MHz.
- Based on ARM: Cortex-M33 32-bit processor.
- Support BLE: 2.4GHz multi-protocol.
SKU: n/a -
Bluetooth and NRF Modules, Compatible with Arduino Boards
BLE Nano Integrated CC2540, Bluetooth Module with, Soldering
Bluetooth and NRF Modules, Compatible with Arduino BoardsBLE Nano Integrated CC2540, Bluetooth Module with, Soldering
SKU:BLE chip: TICC2540Working channel: 2.4GInterface: Micro-USBInput voltage: Micro-USB power supply, Vin6~12V, 5VMicroprocessor: ATmega328P-MU QFN32Bootloader: Latest arduino1.8.8Pin: two rows 2.54mm-15PinSKU: n/a -
Bluetooth and NRF Modules
HC-02 Wireless Bluetooth Module without Baseplate Compatible with HC-05 / HC- 06
Bluetooth and NRF ModulesHC-02 Wireless Bluetooth Module without Baseplate Compatible with HC-05 / HC- 06
SKU:- Supply voltage: 3.2 – 6V DC
- Signal voltage: 3.2 – 6V DC
- Range: ~10m (in open air)
- LED indication present (indicates status of Bluetooth connection)
- Interface: UART (RX and TX)
- Baud rate in standard modes: 9600 (adjustable)
SKU: n/a -
Bluetooth and NRF Modules
EBYTE E73-2G4M04S1A Wearable Devices Smart Home Lock IOT Solutions 4dBm Nordic ble 5.0 nRF52810 Wireless Module
Bluetooth and NRF ModulesEBYTE E73-2G4M04S1A Wearable Devices Smart Home Lock IOT Solutions 4dBm Nordic ble 5.0 nRF52810 Wireless Module
SKU:- Model: E73-2G4M04S1A
- Type: wireless module
- Frequency: 2.4 GHz
- Operating temperature: -40°C ~ 85°C
- Supply voltage: 1.8V~3.6V
- Transmitter output power: 4,3dBm
SKU: n/a -
Bluetooth and NRF Modules
MICROCHIP BM20SPKS1NBC-0001AA Bluetooth Audio Module, V4.1, 2.402-2.48GHZ
SKU:- Operating Voltage: 3.0V to 4.2V
- Frequency Spectrum: 2.402 GHz to 2.480 GHz
- Â Receive Sensitivity: -91 dB (Ï€/4 DQPSK)
- Transmitter Output Power: +4 dBm (maximum) for Class 2
- Temperature Range: -20°C to 70°C
SKU: n/a