USB Interface Module
Showing 49–96 of 270 results
-
USB Interface Module
MINI V2.1 ELM327 OBD2 Bluetooth Interface Auto Car Scanner
SKU:-
The newly developed wireless scan tool.
-
It supports most of the OBD-II protocols.
-
Bluetooth connection, no Batteries, Cables, or Switches.
-
Wireless (Bluetooth) 5~10 meter
-
Retrieve Fault Codes (DTCs) and clear Check Engine lights.
-
Clear trouble codes and turn off the MIL (“Check Engine” light)
- Set the maximum number of responses to obtain
SKU: n/a -
-
USB Interface Module
MiNi ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC
SKU:- Fully Compatible with 10/100/1000Base-T Networks
- Integrated MAC and 10Base-T PHY
- Supports One 10Base-T Port with Automatic Polarity Detection and Correction
- Supports Full and Half-Duplex modes
- Programmable Automatic Retransmit on Collision
- Programmable Automatic Rejection of Erroneous Packets
- SPI Interface with Clock Speeds Up to 20 MHz
- For Arduino, SPI, AVR, PIC, LPC, STM32.
SKU: n/a -
-
USB Interface Module
USB to CAN Adapter Model A, STM32 Chip Solution, Multiple Working modes, Multi-system Compatible
USB Interface ModuleUSB to CAN Adapter Model A, STM32 Chip Solution, Multiple Working modes, Multi-system Compatible
SKU:- Data can be saved as TXT or Excel
- Supports CAN bus detection for status checking
- Sending/receiving CAN data with time scale, allows sequentially displaying
- Baud rate of USB virtual COM port is configurable in the range of 9600 ~ 2000000bps (2000000bps by default)
- Supports setting working parameters by configuration software or serial command, can be saved after power off
- Adopts STM32 chip solution, stable and reliable communication
SKU: n/a -
-
-
USB Interface Module
W5100 Ethernet Module Ethernet Network Module for arduino
SKU:- Support Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet
- 10BaseT/100BaseTX Ethernet PHY embedded
- Auto-Negotiation (Full-duplex and half duplex)
- Support Auto MDI/MDIX
- Simultaneously Supports to 4 independent sockets
- 0.18 µm CMOS technology
- 3.3V operation with 5V I/O signal tolerance
- Provide Serial Peripheral Interface (SPI MODE 0, 3) support
SKU: n/a -
USB Interface Module
Waveshare UART TTL to Ethernet Converter
SKU:- M0 series 32-bit ARM processor
- Protection: built-in 1.5KV electromagnetic isolation
- Interface: 3.3V TTL
- Supported protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
- Support DHCP, DNS, AUTO MDI/MDIX, User-defined MAC address
- Provide(socket), VB, C++, Delphi, Android, IOS
SKU: n/a -
-
-
Interface Connector, USB Interface Module
USB2.0 Audio Video Capture Card Adapter VHS To DVD Video Capture Converter
Interface Connector, USB Interface ModuleUSB2.0 Audio Video Capture Card Adapter VHS To DVD Video Capture Converter
SKU:- Capture High-Quality Video & Audio through USB 2.0 Interface
- Capture Audio without the Sound card
- Supports all AV formats as an input and record in DVD+/-R/RW, DVD+/-VR and DVD-video
- Does not need external power to operate，
- Support Brightness, Contrast, Hue, and Saturation Control.
SKU: n/a -
USB Interface Module
Seeed Studio XIAO RP2040 v1.0
SKU:- Item: XIAO RP2040
- Processor: Dual-core ARM® Cortex® M0+ @133MHz
- Flash: 2MB
- Onboard Button: Reset Button/ Boot Button
- RGB LED: Full-Color RGB LED
- Analog Pin: 4
- PWM Pin: 11
- DAC Output: None
- Programming language: Arduino,MicroPython,CircuitPython
SKU: n/a -
USB Interface Module
Waveshare 2-CH UART To Ethernet Converter, Serial Port Transparent Transmission Module
USB Interface ModuleWaveshare 2-CH UART To Ethernet Converter, Serial Port Transparent Transmission Module
SKU:- M0 series 32-bit ARM processor
- Operating Mode:TCP/UDP
- UART TTL LEVEL 3.3V / 5V compatible
- Supported protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
- Support DHCP, DNS, AUTO MDI/MDIX, User-defined MAC address
- Provide(socket), VB, C++, Delphi, Android, IO
SKU: n/a -
USB Interface Module
Waveshare Industrial Grade Isolated RS232 to RS485 Converter (Without Power Adapter)
USB Interface ModuleWaveshare Industrial Grade Isolated RS232 to RS485 Converter (Without Power Adapter)
SKU:- Product type: industrial-grade isolated converter
- Baudrate: 300-921600bps
- Device port: RS232/RS485 standard complaint
- 1200m transmission distance of RS485
- 15m transmission distance of RS232
SKU: n/a -
USB Interface Module
CP2102 MICRO USB to UART TTL Module 6Pin Serial Converter UART STC Replace FT232
USB Interface ModuleCP2102 MICRO USB to UART TTL Module 6Pin Serial Converter UART STC Replace FT232
SKU:- 5P – A type USB USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 5pin connector.
- 5pins for 3.3V,TXD,RXD,GND & 5V All handshaking and modem interface signals
- Baud rates: 300 bps to 1.5 Mbps.
- Byte receives buffer; 640 byte transmit buffer.
SKU: n/a -
USB Interface Module
Waveshare CP2102 USB UART Board (Type C), USB To UART (TTL) Communication Module, USB-C Connector
USB Interface ModuleWaveshare CP2102 USB UART Board (Type C), USB To UART (TTL) Communication Module, USB-C Connector
SKU:- Supports Mac OS, Linux, Android, WinCE, Windows 7/8/10/11…
- Voltage output support: 5V or 3.3V
- Integrated USB protection device: SP0503
- 3x LED indicators: TXD LED, RDX LED, POWER LED
- Pins accessible on pinheaders: TXD, RXD, RTS, CTS
SKU: n/a -
-
-
USB Interface Module
Waveshare PCIe TO M.2 Adapter, Supports Raspberry Pi Compute Module 4
SKU:- Adapter For NVMe Protocol M.2 SSD, Faster Reading/Writing, Improving Efficiency
- Supports Base Boards With PCI-E×1 / ×4 / ×8 / ×16 Socket
- Supports Raspberry Pi Compute Module 4
- Compatible With Different Sizes Of M.2 SSD
- Slot Support-M Key(notch on the top right)
SKU: n/a -
USB Interface Module
HLK-RM04 UART to Serial Wifi Ethernet Wifi Module
SKU:- Serial to WIFI, Ethernet, Ethernet to Wifi multifunction Wifi module, transparent dual-way data transmission
- Integrated 10/100M ethernet port, Max. baud ratio up to 230.4kbps
- Adopts Ralink program, high-quality material
- Reliable system core suit safety and long-run system application
- Working temperature: industrial class -25~75°C
SKU: n/a -
-
-
USB Interface Module
V1.5 ELM327 OBD2 Bluetooth Interface Auto Car Scanner
SKU:Works with all OBD-II compliant vehicles2. Wireless (Bluetooth)3. Software included for Palm, PDA4. Software included for Windows PC5. Software included for Windows Smartphone6. Supports ISO 9141, KWP20007. Supports SAE J18508. Supports CAN busSKU: n/a -
USB Interface Module
Waveshare Industrial Modbus RTU 8-Channel Relay Module RS485 Bus, Multi Protection (Without Power Adapter)
USB Interface ModuleWaveshare Industrial Modbus RTU 8-Channel Relay Module RS485 Bus, Multi Protection (Without Power Adapter)
SKU:- Power supply voltage: 5V
- Communication interface: RS485
- Relay channels: 8
- Contact form: 1NO 1NC
- RS485 address: 1~255
- Communication protocol: Standard Modbus RTU protocol
SKU: n/a -
-
-
-
-
-