Relay Modules

1. Work Voltage: 5VDC
2. Quiescent Current: 5 mA
3. Max Current: 190 mA
4. Trigger Current: 3-5 mA
5. Low-Level Trigger Current: 0-1.5V
6. High-Level Trigger Current: 3-5V

1. Board size: 149*80mm
2. Weight: 140g
3. Power supply mode supports DC7-28V/5V
4. Onboard WIFI module RST reset button
5. 4M Byte Flash

1. Part Number: H3MB-052D
2. Power supply:3-24VDC/160mA
3. Trigger Voltage (VDC):3-24 VDC
4. Switching Voltage (VDC):50@2A
5. Isolation: Phototriac

1. Operating Voltage: 24V DC
2. Equipped with high-current relay 10A@250VAC / 10A@30VDC
3. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
4. High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
5. A freewheeling diode to protect your microcontroller
6. Input Signal Pin connected to Burg stick for easy accessibility
7. LED Status indicators to indicate the relay ON/OFF status
8. Mounting holes provided

1. Default Relay trigger Setting : Low-Level
2. Logic Input (V) : 3.3 ~ 5
3. Trigger Voltage (VDC) : 12
4. Switching Voltage (VAC) : 250@10A
5. Switching Voltage (VDC) : 30@10A

1. Channel: 1 channel
2. Comes with GUIDE RAIL
3. Relay Voltage: 24V
4. High impedance controller pin
5. Pull-down circuit for the avoidance of malfunction
6. One normally closed contact and one normally open contact
7. Triode drive, increasing relay coil

1. Operating voltage: DC 5V
2. Operating temperature: -40~80 degrees
3. Operating frequency: 433MHZ Receive sensitivity: ≥-95dB
4. Working Mode: jump switch, point action, self-locking, and interlocking(adjustable)

1. Product Name:8 Channels Modbus  Relay Module
2. Working Voltage: DC 24V
3. Working Current:1A
4. Work Temperature:-25℃~85℃
5. Work Humidity:5%~95%RH

1. Channel: 1 channel
2. Comes with GUIDE RAIL
3. Relay Voltage: 12V
4. High impedance controller pin
5. Pull-down circuit for the avoidance of malfunction
6. One normally closed contact and one normally open contact
7. Triode drive, increasing relay coil

1. Transmission Distance(m) :400
2. Relay Channel:4
3. Trigger Voltage (VDC): 12
4. Switching Voltage (VAC):250@10A
5. Switching Voltage (VDC):30@10A
6. Baud Rate:9600

1. Timing Range (Settable):
   1. 0.1~99.9 seconds
   2. 1~999 seconds
   3. 1~999 minutes
2. Working Voltage: DC 12V
3. Signal Voltage: DC 4~20V

1. Work Voltage: 24VDC
2. Quiescent Current: 5 mA
3. Max Current: 190 mA
4. Trigger Current: 3-5 mA
5. Low-Level Trigger Current: 0-1.5V
6. High-Level Trigger Current: 3-5V

1. Timing Range (Settable):
   1. 0.1~99.9 seconds
   2. 1~999 seconds
   3. 1~999 minutes
2. Working Voltage: DC 5V
3. Signal Voltage: DC 4~20V

1. Transmission Distance(m) :400
2. Relay Channel:2
3. Trigger Voltage (VDC): 5
4. Switching Voltage (VAC):250@10A
5. Switching Voltage (VDC):30@10A
6. Baud Rate:9600

1. Easy to set up and pair with Android Phone
2. Onboard Bluetooth status indicator and relay indicator
3. With 4 optocoupler isolation, strong anti-interference ability
4. Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module
5. Effective control distance(on open area): 10m
6. Module Operating Voltage: 12VDC

1. Operating Voltage: 7 to 36V
2. Communication Interface: RS485
3. Relay Channels: 32
4. Contact Rating: 30VDC

1. Transmission Distance(m) :400
2. Relay Channel:2
3. Trigger Voltage (VDC): 12
4. Switching Voltage (VAC):250@10A
5. Switching Voltage (VDC):30@10A
6. Baud Rate:9600

Power Supply (V):7~36
Relay Channels:6
Contact Rating:≤10A 250VAC/30VDC

1. Operating Voltage: 12V DC
2. Maximum Load: AC: 250v/10a; DC: 30v/10a
3. Isolation: SMD Optocoupler Isolation with two fully isolated power supply systems
4. Drive Modes: High-level and Low-level drive mode