Relay Modules
Showing 49–96 of 203 results
-
Relay Modules
8 Channel 5V Solid State Relay Module Board OMRON for Arduino
SKU:- 8-channel 2 AMP Solid State Relay board.
- Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
- Good for lighting, Holiday displays etc.
- With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
- Power supply: 5 V DC(160 mA)
- Trigger Current: 2mA
- Trigger Voltage: 3.3V-5V
SKU: n/a -
Relay Modules
USB Control 1 Channel Module 5V Relay Module
SKU:- Contact type: NC / COM / NO
- Input current: ≥300mA
- Input voltage: DC 5V
- Support Win7, XP 32-bit systems
- Onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is closed, the red disconnect
- Military grade PCB board production.
SKU: n/a -
Relay Modules
ESP8266 10A DC 7-30V Network Relay WIFI Module
SKU:- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
SKU: n/a -
Relay Modules
2 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
Relay Modules2 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
SKU:- Supply Voltage: DC 12V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: High and low-level trigger
- Load Voltage: DC 30V / AC 250
- Load Current: 30A
- Relay Life: more than 100,000 times
SKU: n/a -
Relay Modules
5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger)
SKU:- 8 channel 2 AMP Solid State Relay board
- Control 8 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Has been assembled, and the electrical test passed.
- Operating Voltage: 5V
- Operating Current: 16mA
- Maximum Load: 2A @ 240VAC
SKU: n/a -
Relay Modules
1 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
Relay Modules1 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
SKU:- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
SKU: n/a -
Relay Modules
8 Road/Channel Relay Module (with light coupling) 12V
SKU:- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: n/a -
Relay Modules
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupletr
Relay ModulesNE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupletr
SKU:- Timing from microseconds to long hours.
- Simple circuit design.
- Precision Pulse Generation / Timing.
- Adjustable Duty Cycle.
- Monostable Operation.
- Supply Voltage (V): 12
- Adjustable Time(s): 0 to 10
- AC Control Voltage(V): 0-250 @max. 10A
- DC Control Voltage(V): 0-30 @max. 10A
SKU: n/a -
Relay Modules
ESP8266 WiFi 5V 1 Channel Relay Module
SKU:- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: n/a -
Relay Modules
433MHz 12V 4 Channel, Relay Module Wireless, Remote Control Switch, without Battery
SKU:- Working Mode: Output selectable between Latching and Non Latching types
- Relay Board Operating voltage: DC24V
- Working current: 50 ~ 200mA
- the operating frequency: 433MHz
- Application: 4 x AC 230V up to 10A
SKU: n/a -
Relay Modules
8 Road/Channel Relay Module (with light coupling) 24V
SKU:- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: n/a -
Relay Modules
5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
SKU:- Has been assembled, and electrical test passed.
- Operating Voltage: 5V
- Operating Current: 12.5mA
- Maximum Load: 2A @ 240VAC
- Input control signal voltage:
- 0-2.5V status low level, relay OFF
- 3-5V status high level, relay ON
SKU: n/a -
-
Relay Modules
12V 8 Channel Relay Module
SKU:- Using high-current relay, AC250V 10A DC30V 10A.
- Contact some independent wiring, safe and reliable.
- The standard interface can be extended to a variety of development boards.
- With fixed screw holes for easy installation.
- Suitable for a variety of platforms such as 8051/AVR/AVR/ARM.
SKU: n/a -
Relay Modules
4 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
Relay Modules4 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
SKU:- Supply Voltage: DC 5V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 3.3-5V relay ON; 0-2.5V relay OFF
SKU: n/a -
-
-
Relay Modules
Photosensitive Resistance Sensor Relay Module
SKU:- Adjust the sensitivity with the potentiometer. Set the start relay threshold by adjusting the potentiometer.
- When it is brighter, the module relay pulls in.
- When the threshold is dark, the relay is disconnected.
- Operating Voltage: 3.3V – 5V.
SKU: n/a -
-
Relay Modules
XY-LJ02 6-30V Micro USB, Digital LCD Display Time, Delay Relay Module, Control Timer Switch, Trigger Cycle Timing
Relay ModulesXY-LJ02 6-30V Micro USB, Digital LCD Display Time, Delay Relay Module, Control Timer Switch, Trigger Cycle Timing
SKU:- Product Name:Delay Relay Module
- Â Product Number:XY-LJ02
- Â Working Voltage:DC 6V-30V or 5V Micro USB
- Â Control Current:10A(Max)
- Â Quiescent Current:15mA
- Â Working Current:50mA
-  Working temperature: -40~85℃
- Â Suitable for the battery: Storage Battery, Lithium battery
- Â Trigger signal source: High-level trigger (3.0V~24V), Low-level trigger (0.0V~0.2V), switching control (passive switch)
- Â Reverse protection: Yes
- Â Physical dimension:80*38*2.1mm
SKU: n/a -
Relay Modules
12V 6 Channel with Light Coupling Relay Module
SKU:- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: n/a -
Relay Modules
433MHz 24V 4 Channel, Relay Module Wireless, Remote Control Switch (without Battery)
SKU:- Working Mode: Output selectable between Latching and Non Latching types
- Relay Board Operating voltage: DC24V
- Working current: 50 ~ 200mA
- the operating frequency: 433MHz
- Application: 4 x AC 230V up to 10A
SKU: n/a -
Relay Modules
ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch
SKU:- Product: ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch
- Working Voltage: DC 5V
- Load Voltage: DC 30V 10A /AC 250V 10A
- Work Temperature: -40℃~85℃
- Work Humidity: 0%~95%RH
SKU: n/a -
-
-
Relay Modules
2 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger
Relay Modules2 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger
SKU:- Supply Voltage: DC 24V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: High and low-level trigger
- Load Voltage: DC 30V / AC 250
- Load Current: 30A
- Relay Life: more than 100,000 times
SKU: n/a -
Relay Modules
12V Time Control Switch Intermittent Infinite Cycle Countdown Switch Controller Timing Relay Module
Relay Modules12V Time Control Switch Intermittent Infinite Cycle Countdown Switch Controller Timing Relay Module
SKU:- Output Capacity: DC 5V~30V, AC 220V 10A
- Static Current: 20mA
- Working Current: 50mA
- Working Voltage: 12V（fluctuate between 10V~16V won’t be affected)
- Trigger Signal: high-level voltage 4V~20V
SKU: n/a -
Relay Modules
1 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger, （with Guide Rail）
Relay Modules1 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger, （with Guide Rail）
SKU:- Channel: 1 channel
- Comes with GUIDE RAIL
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
SKU: n/a -
Relay Modules
4 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
Relay Modules4 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
SKU:- Supply Voltage: DC 12V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 12V relay ON; 0-2.5V relay OFF
SKU: n/a