Breakout boards are common electrical components that take a bundled cable and “break out” each conductor to a terminal that can easily accept a hook-up wire for distribution to another device. They are a common item in electronic projects and enable easy, clean installation of electronic devices.
Here is the huge collection of Arduino/Pi/AVR compatible Breakout boards and it includes ADC-DAC, AV stereo, Pulse generator, and Power amplifier. Breakout boards take small sensors, chips, and components and make them easy to use with whatever platform you like most! We have a broad selection of versatile breakout boards, for every use.
Breakout Board
Showing 1–48 of 57 results
-
Best Prices, Breakout Board
ADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier
SKU: 43582- Wide Supply Range: 2.0v To 5.5v
- Low Current Consumption
- Continuous Mode: Only 150µa Single-shot
- Auto Shut-down
- Programmable Data Rate: 8SPS to 860SPS
- It has Internal low-drift voltage reference
SKU: 43582 -
-
Best Prices, Breakout Board
MP3-TF-16P MP3 SD Card Module with Serial Port
SKU: 31193- Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
- 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
- Fully supports FAT16, FAT32 file system
- Maximum support 32G TF card
- Support U disk to 32G, 64M bytes of NORFLASH
- A variety of control modes are available. IO control mode, serial mode, AD key control mode
SKU: 31193 -
Breakout Board
USB Type A Breakout Board – Male
SKU: 42887If you want to add a standard type A USB male plug to your project, this breakout board is for you. As simple as it is, this board breaks out all 4 pins of the USB connector into more manageable 2.54mm pitch soldering holes. You can then solder a 4-pin header to plug into a breadboard or solder wires directly to the holes.
SKU: 42887 -
Breakout Board
Frequency Adjustable Pulse Generator Module NE555
SKU: 31287- Input Voltage: 5V-15VDC
- Output amplitude: 4.2V V-PP to 11.4V V-PP.
- Output Current : 15mA for 5V & 35mA for 12V.
- Color: Blue
- Working voltage: 5-12V
- Size: 25x 13 x 12 mm (LxWxH)
- Minimum – 50% duty cycle, 3.7 Hz & Maximum – 98% duty cycle, 1.3KHz
SKU: 31287 -
Breakout Board
Serial Port Mini RS232 to TTL Converter Adaptor Module Board MAX3232-2pcs.
SKU: 31380- High speed, replaceable MAX232 based. The device fitted supports up to 120kbps
- Works with PCs or Laptops
- Supports microcontroller UARTs – 5V TTL signal levels.
- Single DC supply: wide input range for 4201 or 5V for 4202 and 4203
- Small PCB footprint of 50´40mm
- Low current status LED(s)
- Very low power consumption
SKU: 31380 -
-
Breakout Board
IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi
SKU: 44050- Voltage: 3.3 – 5V.
- Ports: Digital Level.
- Output load voltage: 0-24 V.
- Output load current: <5A (1A above need to add heat sink).
- Platform: Arduino, MCU, ARM, raspberry pi.
- Using original IRF520 Power MOS, you can adjust the output PWM
SKU: 44050 -
Breakout Board
I2C Bi-Directional Logic Level Converter- 2 Channel
SKU: 835816- Dimensions: 11×15 x 2 (L x W x H) mm
- Weight: 1gm
- Mutual transform between 5V TTL and 3.3V TTL
- Two channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 4 pin contact pins
SKU: 835816 -
Breakout Board
PAM 8610 Digital Stereo Class-D Amplifier Board 2x15W Output
SKU: 43918- Dual-Channel Stereo Output
- Run-on 7V to 15V power Supply
- 32 Steps DC volume control has a +32dB to -75dB range.
- 40 pin QFN 6 x 6 mm package.
- Much higher efficiency in terms of cost and performance than competitors’ ICs
SKU: 43918 -
Breakout Board
DC Power Module DC Power Adapter Plate
SKU: 31280- Compatible with connector size: 5.5×2.1 mm.
- Weight: 2 gm
- Power output interface: 2 VCC, 2-way GND
- Reliable and safe connection
- Size: 26×12×13(L×W×H) mm
- Hole Diameter: 6.5mm
- Pin Diameter: 2.1mm
- It has wide use for safe and reliable connection between various Application and power sources
SKU: 31280 -
Breakout Board
ESP-01 Adapter 3.3V 5V Board
SKU: 62434- On-board level shift circuit
- Arduino UNO R3 and the compatible board can directly connect to this module;
- Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
- Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
- Working current: 240mA(MAX).
SKU: 62434 -
-
-
-
-
Breakout Board
Si5351A I2C 8 Khz-160 Mhz Clock Generator Breakout Board Module
SKU: 766341- Generates up to 8 non-integer-related
- Frequencies from 8 kHz to 160 MHz
- I2C user-definable configuration
- Exact frequency synthesis at each output (0 ppm error)
- Highly linear VCXO
- The optional clock input (CLKIN)
- Low output period jitter: 100 ps pp
SKU: 766341 -
Breakout Board
D1 Double Sided Breakout PCB Proto Board Shield with Berg Pins
SKU: 1031045- The hole plate is a universally designed circuit board that is a good choice for people interested in soldering.
- Compared to professional PCB printed circuit boards, hole boards are low-cost and are favored by amateurs.
- Easy to use.
- Flexible expansion
SKU: 1031045 -
-
Breakout Board
CP2112 debug board USB to I2C Communication Module
SKU: 617815- On-chip power-on reset circuit, on-chip voltage regulator: 3.45 V output
- Compliant with USB specification 2.0 standard; full speed (12Mbps)
- USB suspend status via SUSPEND and /SUSPEND pins
- Integrated 194-byte one-time programmable ROM for storing customizable product information
SKU: 617815 -
-
-
-
-
Breakout Board
SparkFun Cryptographic Co-Processor Breakout – ATECC608A
SKU: 1037779- Operating Voltage: 2.0V-5.5V
- Active Current Draw (for ATECC608A): 16 mA
- Sleep Current : <150 nA
- Guaranteed Unique 72-bit Serial Number
- Offers two Qwiic ports for plug and play functionality
- Creates & securely stores unique asymmetric key pairs
- Provides internal high quality FIPS random number generator
SKU: 1037779 -
Breakout Board
Adafruit BNO055 + BMP280 BFF Add-On for QT Py
SKU: R111304- Sensor Data Output (BMP280):
- Barometric Pressure: ±1 hPa absolute accuracy
- Temperature: ±1.0°C accuracy
- Communication Interface: I2C
- Optional Pins (BNO055):
Interrupt/Reset Pins: Available for advanced control - Address Configuration:
Address-changing jumpers: Available for both sensors
BMP280 Default Address: 0x77
BNO055 Default Address: 0x28
SKU: R111304 -
Breakout Board
Adafruit I2S MEMS Microphone Breakout – ICS43434
SKU: R176046- Compact Size: Smaller than traditional electret microphones.
- Frequency Response: 50Hz to 15KHz; low-pass filter eliminates frequencies above 24KHz.
- Digital Output: I2S connection via Clock, Data, and Left-Right pins; no analog conversion needed.
- Operating Voltage: 1.6V to 3.6V; not compatible with 5V logic.
- Versatile Compatibility: Works with Cortex M-series chips and Raspberry Pi.
SKU: R176046 -
Breakout Board
Adafruit AHT20 – Temperature & Humidity Sensor Breakout Board
SKU: R176051- Affordable: Cost-effective sensor.
- Compatible: Works with Arduino/Raspberry Pi via I2C.
- Accurate: ±2% humidity, ±0.3 °C temp.
- Single I2C Address: One sensor per bus.
- Easy Setup: Built-in circuitry and STEMMA QT connectors.
- Versatile: Great for environmental monitoring and DIY.
SKU: R176051
