Flight Controller & Accessories

1. UBEC input voltage : 7~51v (2~12s LiPo)
2. Rated current: 60A
3. Max current: 120A(<60S)
4. Max current sensing: 120A
5. Supports: 12S battery

1. CPU: STM32F030
2. Six-Axis: MPU6050
3. Firmware version: Silverware firmware
4. Power Cable: 55mm, with JST-PH 2.0 connector
5. ESC: All FETs are rated at 6A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
6. Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern

1. Stack Size: 20x20mm
2. Flight Controller: F4 Flight Controller (OMNIBUSF4 Firmware)
3. ESC: 4in1 BLHeli_32 35A ESC
4. Supply Voltage: 2-6S lipo
5. VTX: 25mW/200mW

1. Main FMU Processor: STM32F76
2. 32 bit ARM® Cortex® M7, 216 MHz Processor running NuttX RTOS,
3. More computing power and 2X the RAM than previous versions)
4. Abundant connectivity options for additional peripherals (UART, I2C, CAN)
5. Redundant power supply inputs and automatic failover
6. External safety button for easy motor activation
7. New sensors with higher temperature stability
8. Multicolor LED indicator
9. Integrated vibrations isolation
10. High-power, multi-tone piezo audio indicator
11. microSD card for long-time high-rate logging

1. Processer:32bit STM32F427 Cortex M4,32-bit STM32F103
2. Model: PX4
3. Input Voltage:6-10 V
4. RAM:256 KB

1. STM32F303 CPU, 72Mhz inc FPU
2. CPU: STM32F303, 72Mhz inc FPU
3. Acro: High-Capacity Flash
4. Accelerometer/gyro: MPU6050
5. Board size: 36 x 36 x 5mm (without shell)
6. Board weight: 5.9g
7. Weight: 22 gm(with all accessories)

1. Brand (trade name): JHEMCU
2. Model: F4 NOXE V3
3. Main control (MCU): STM32F411CEU6/100 MHz
4. Sensor: BMI 270/Gyro/Accel
5. Video Overlay (OSD): AT7456E

1. Product: F405 V1.1 Flight Controller+45A 2-6S 4 in 1 ESC Flytower
2. This is combo kit of Flight controller & ESC
3. High performance & efficient flight controller & ESC
4. Light weight, Easy to connect
5. Flight controller comes with ARM processor

1. Material: super soft silicone.
2. Color Function JST-SH Pin Servo connector plug.
3. Total Cable length: 15cm

1. This is combo kit of Flight controller & ESC
2. High performance & efficient flight controller & ESC
3. Light weight, Easy to connect
4. Compact in size
5. Flight controller comes with ARM processor
6. ESC is build to give best performance

1. One of the first open-source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000
2. Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively
3. Communication I2C, analog I/O.
4. Module Telemetry, GPS, Power module
5. Support 8-channel input

1. Power Input:2-6S LiPo
2. Dimension :52 x 32x 19mm
3. Weight :35g（with USB extender）
4. Wireless configuration
5. LED strip controller
6. Battery level indicator

1. 128Mb Flash(16M Byte)
2. SBUS/PPM input (Pinheaders)
3. DSM/DSM2/DSMX input(Plug)
4. 6PWM output (Pinheaders)
5. Only 36x36mm, mount holes 30.5×30.5mm
6. All through hole pin header Design  -no Sh connectors
7. STM32 F405 MCU, Runs Raceflight CC3D REVO firmware
8. Works Perfect with Raceflight or BetaFlight 3.0

1. SpeedyBee F7 V3 Flight Controller
2. Power Input: 3S-6S Lipo
3. IMU(Gyro): BMI270
4. USB Port Type: Type-C
5. Weight: 10.7g

1. MCU: STM32F722RET6
2. Gyroscope: MPU6000
3. Barometer: BMP280
4. Input Voltage: 12~25.2V (3~6S LIPO)

1. STM32 F405 MCU
2. Runs Beta flight (3.0.1 and up)
3. Race light and D-ronin firmware
4. SBUS/PPM input (Pinheaders)
5. 6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
6. Only 36x36mm, mount holes 30.5×30.5mm
7. SPI Sensor MPU6000
8. 128Mbit Flash

1. Product Name: DATALINK V2
2. Telemetry: USB, CAN, Serial
3. Voltage: 6-81V
4. Size: 57*40*13mm(without wires)
5. Weight: 27g

1. MCU STM32H743 32-bit processor running at 480 MHz
2. VTX ON/OFF Pit Switch – Switch can be enabled using USER1 in the Beta flight Mode tab.
3. H7 processor @480 MHz
4. Bluetooth onboard
5. 8 Motors outputs in plugs
6. 128 MB flash for logging
7. VTX On/Off switch

1. Model: Pixhawk 4
2. Power: 1000mw
3. Frequency: 433 Mhz
4. Material: Composite Material
5. Weight: 62g
6. Board dimensions: 8 x 5 x 1mm

1. Model: 6C PM02
2. Product: Flight Controller Module
3. Brand: Holybro Pixhawk
4. Clock speed: 480 MHz
5. Processor: H7 micro-controller contain the Arm Cortex-M7

1. MCU: 100MHz STM32F411CEU6
2. IMU: MPU6000 (SPI)
3. Continuous current: 3.5 Amps
4. Input voltage range: 6~30V
5. Compatible lipo: (2~6S LiPo)

1. High-Speed STM32 processor
2. Triple Redundant IMU
3. Light Weight
4. Isolated & Dampened IMU
5. Compatible with Ardupilot and PX4.
6. It can be configured with AeroGCS, Mission Planner, QGround Control software, etc.

Limited Time Launch Offer !!!

1. FMU Processor: SMT32F407 32bit Arm Cortex-M7 168Mhz
2. Gyroscope: ICM-20689
3. Accelerometer: ICM-20689
4. Barometer: MS5607
5. Compass: IST8310

1. 8 Channel PWM input
2.  8 motor outputs
3.  12-way Auxiliary input and output
4.  Supports GPS, compass, telemetry and power module
5.  Onboard connections JST-SH with 1.0mm pitch
6.  Compatible with official Firmware and Groundstation.

1. MCU: STM32H743 32-bit processor running at 480 MHz
2. IMU: MPU6000
3. Barometer: BMP280
4. OSD: AT7456E
5. Onboard Bluetooth chip: ESP32-C3

1.  Model: XRotor Flight Controller F7
2. Processor: STM32F722 32-bit
3. Connectivity: UART, I2C, and SPI ports
4. Power Supply: 5V
5. USB Port: MicroUSB
6. LED Control: 5V @ 1.5A;10V @ 1.5A