The Flight Controller (FC) serves as the brain of the aircraft, equipped with sensors to detect drone movements and user commands. It processes this data to precisely control the motor speed, enabling the drone to maneuver as directed.
Discover a diverse range of Quadcopter Flight Controllers at Robu. Our affordable and high-quality flight controllers are essential for drone enthusiasts. The extensive selection of FCs for FPV drones can be overwhelming, especially for beginners. Leave the task of choosing the right FC to us and enjoy your flight without worries. We are dedicated to providing FCs that continually evolve, becoming more compact, integrating advanced features, and utilizing superior processors and hardware. Trust us for your flight control needs.
Flight Controller & Accessories
Showing 1–48 of 211 results
-
-
Flight Controller & Accessories, Interfacing and USB Cables
DF13 6 Pin Flight Controller Cable
SKU:- Item Name: DF13 6 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 6 pin
- Length: 200mm(26AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
SKU: n/a -
Flight Controller & Accessories
Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
Flight Controller & AccessoriesPixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
SKU:- Supply Voltage: 7V.
- Processor: 32 Bit Cortex M4 Core
- Bus interface (UART, I2C, SPI, CAN).
- Firmware: Mission planner.
- Sensors: Gyrometer, Accelerometer, Barometer & Magnetometer
- Micro SD card to record flight data.
SKU: n/a -
Flight Controller & Accessories, Interfacing and USB Cables
DF13 4 Pin Flight Controller Cable
SKU:- Item Name: DF13 4 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 4 pin
- Length: 200mm(28AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
SKU: n/a -
Flight Controller & Accessories
DJI Naza M Lite Multi-Rotor Flight Controller without GPS
SKU:- Input Voltage (V): MC: 4.8V~5.5V (recommended 2S~6S Lipoly).
- Power Consumption: MAX: 1.5W (0.3A @ 5V), Normal: 0.6W (0.12A @ 5V).
- Operating Temperature:-10°C ~ +50°C.
- Supported ESC Output: 400Hz refresh frequency
SKU: n/a -
-
Drone Accessories, Flight Controller & Accessories
Pixhawk I2C Port Expand Board with Cable
SKU:- Package Weight: 5 gmÂ
- Number of Ports: 5.
- Board Dimensions: 33 x 12 x 6 mm(LxWxH)
- Net Weight: 3g
- Brand new and high quality
- The I2C splitter expands the I2C port to allow up to four additional peripherals to connect to Pixhawk.
SKU: n/a -
Flight Controller & Accessories
SP Racing F3 Flight Controller ACRO Version
SKU:- The STM32F3 CPU, MPU 6050 sensor, 16M high-capacity flash memory, OSD function.
- The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).
- Tiny and lightweight, the Racing F3 has a standard 36x36mm form-factor with 30.5mm mounting holes and weighs just 6 grams.
- Flight Logging, on-board high-capacity black box flight log recorder – optimize your tuning and see the results of your setup without guesswork.
- OneShot ESC, full support for OneShot ESCs for easy PID tuning and a sharper response.
- Broad RC receiver supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers, no external inverters required (built-in).
SKU: n/a -
Flight Controller & Accessories
OMNIBUS F4 V2 PRO Flight Controller with SD Card Slot & BEC
SKU:- Dimensions: 37 x 37 x 10 mm(L x H x W)
- Weight: 12 gm.
- SPI Gyro MPU6000
- MicroSD Blackbox
- F4 Processor (F405)
- 5v3a SBEC
- Built-in Current Sensor
- On-Board OSD (controlled by Beta flight, FC over SPI bus)
- On-Board Video Filter (only can supply 5V to VTX and Camera)
- On-Board Voltage Regulator and Power supply (BEC)
SKU: n/a -
Flight Controller & Accessories
DJI NAZA-M Lite V1.1 with GPS Kit
SKU:- Supported Multi-Rotor: Quad-rotor I4, X4 / Hex-rotor I6, X6, IY6, Y6.
- Supported ESC Output: 400Hz refresh frequency.
- Recommended Transmitter: PCM or 2.4GHz with minimum 4 channels.
- Power Consumption: MAX1. 5W (0.3A@5V) Normal:0.6W (0.12A@5V).
- Weight: MC:25g; VU:20g; GPS:21.3g.
- All-in-One Design.
- Advanced attitude stabilized Algorithm.
- Multiple flight control mode/intelligent switching.
- GPS Module Available/Accurate Position hold.
- Intelligent Orientation Control (IOC).
- Failsafe mode.
SKU: n/a -
Flight Controller & Accessories
DJI NAZA M V2 Multirotor Autopilot Controller set with GPS
SKU:- Input Voltage (V): MC: 4.8V~5.5V (recommended 2S~6S Lipoly).
- Supported ESC Output 400 Hz refresh frequency
- Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
- Power Consumption MAX: 1.5 W (0.3 A at 5 V)
- Operating Temperature: -10 to 50°C
SKU: n/a -
-
Drone Accessories, Flight Controller & Accessories
SP RACING F3 FC Replacement Accessories Set
SKU:Accessories compatible with SP RACING F3 Flight Controller Module
High-quality cable and connectors.
1 x 3*8 Burg connector(Straight)
1 x 3*8 Burg connector(Right-angle)
1 x 1*10 Burg Connector(Straight)
2 x 2pt cable
2 x 4pt cable
2 x 8pt cableSKU: n/a -
Flight Controller & Accessories
F3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
Flight Controller & AccessoriesF3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
SKU:- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Run on SP RACING F3 EVO firmware 32 brush flight control
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
SKU: n/a -
Flight Controller & Accessories
Mini OSD for Pixhawk Flight Controller
SKU:- ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- FTDI cable compatible pinout
- Standard 6 pin ISP header
- 2 independent power sections with an LED indicator on each
- Solder jumpers for combining the power sections
Compatible flight controller:
APM2.5/2.6/2.8
Pixhawk PX4SKU: n/a -
Flight Controller & Accessories
Mini USB (90° Connector) to FPV AV Output Cable for GoPro Hero 3
SKU:- USB connector is used to connect to the USB port on your GoPro Hero3 Camera.
- The 3 pin female connector is for AV video output
Typical application:
Video output from your GoPro Hero 3 USB port to your video wireless transmitter. (Connect your GoPro Hero 3 directly to FPV transmitter)
SKU: n/a -
Flight Controller & Accessories
Naze32 6DOF Flight Control board
SKU:- Battery voltage monitoring.
- Built-in FrSky telemetry converter.
- Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz.
- Onboard USB for setup and configuration.
- Modern GUI for all operating systems, Baseflight Configurator.
SKU: n/a -
Flight Controller & Accessories
F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC
SKU:- Product: Flight Controller
- SPI Gyro IC268G
- On-Board OSD (controllered by Betaflight, FC over SPI bus)
- MicroSD Blackbox
- Baro (BMP280)( default is closed,need to open in configuration,if not know how to open,contact with us)
SKU: n/a -
Flight Controller & Accessories
F4 V3S Plus Flight Control OSD 2-6S Two way 3A BEC 9V Pad Design For Betaflight RC FPV Racing Drone Quadcopter Frame
Flight Controller & AccessoriesF4 V3S Plus Flight Control OSD 2-6S Two way 3A BEC 9V Pad Design For Betaflight RC FPV Racing Drone Quadcopter Frame
SKU:- Item name: F4 V3 PLUS Flight Controller
- Firmware: Omnibus ~ f4
- Board Dimensions: 36x36mm
- Montagegaten: 30.5×30.5mm
- STM32 F405 MCU
- Dshot protocol
SKU: n/a -
Flight Controller & Accessories
OpenPilot CC3D EVO Flight Controller Straight Pin
SKU:- 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
- Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac, and Linux.
- Direct high-speed USB support with no drivers required, a true plug and play device.
- Spektrum satellite receiver support.
- Futaba S-BUS hardware support.
- Innovative Flexi-port technology for superior port flexibility.
- 4Mbits onboard EEPROM for configuration storage.
SKU: n/a -
-
Flight Controller & Accessories
F3 EVO V2.0 Flight Control
SKU:- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
SKU: n/a -
-
Flight Controller & Accessories
SP Racing F3 Flight Controller Deluxe
SKU:-  Stackable design – perfect for integrating with OSDs and power distribution boards.
- 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
- Full support for OneShot ESCs for easy PID tuning and a sharper response.
- Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers.
- No external inverters required (built-in).
- Dedicated output for programmable LEDs – great for orientation, racing and night flying.
- Dedicated I2C port for connection of OLED display without needing flight battery.
- Battery monitoring ports for voltage and current.
- Sonar support for precision low-altitude hold.
- Buzzer port for audible warnings and notifications.
- Symmetrical design for a super tidy wiring.
- Barometer mounted on the bottom of the board for easy wind isolation.
- Â Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
SKU: n/a -
Flight Controller & Accessories
Naze32 10DOF Flight Control Board
SKU:- Axis: 2000 degrees/second 3-axis MEMS gyro.
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Built-in FrSky telemetry inverter (shared w/main port).
- A modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
- Onboard MicroUSB for setup and configuration.
- Multi WiFi-based configuration software for easy setup.
SKU: n/a -
Flight Controller & Accessories
Micro Minim OSD For Racing F3 Naze32 Flight Controller RC Drone
SKU:- ATmega328P with Arduino bootloader.
- MAX7456 monochrome on-screen display.
- +5V 500mA regulator for up to +12V supply input.
- FTDI cable compatible pinout.
- The standard 6-pin ISP header.
- Standalone, or with APM/ Flip / Flip32+ flight controllers.
SKU: n/a -
Flight Controller & Accessories
Naze 32 Full REV6 Flight Controller with Compass & Barometer
SKU:- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500).
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Fully pinout compatible with rev5 accessories (OSDoge etc).
- SBUS Inverter.
- Sonar pads w/resistors added for direct connection to 5V sonar.
- MS5611Â barometer.
- 128mbit flash.
SKU: n/a