(ESC) Drone Speed Controller

1. Waterproof and dustproof, suitable for races in all weather conditions.
2. Small size with built-in capacitor module.
3. Fwd/Rev/Br running mode fits various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).
4. Great current endurance capability.
5. Great built-in BEC output capacity.

1. SpeedyBee BLS 50A 30×30 4-in-1 ESC
2. Firmware: BLHeli_S JH50
3. Power Input: 3-6S LiPo
4. Weight: 13.8g

1. Programmable PWM frequency of up to 48KHz
2. Power supply: 2-5S (7.4-16.8V)
3. Continuous current: 25A
4. Burst current: 35A (5S)
5. Auto-timing for higher efficiency and reliability

1. Product: Bidirectional 50A 2-6sUBEC 5A 5V
2. Input voltage: 5V
3. Frequency PWM: 1000-2000us
4. Peak Current (A): 50

1. Product: HENGE 8A UBEC
2. Provide large output current
3. Overcurrent and overheat protection function
4. The max efficiency of the chip is up to 93%

1. Model: Nano 12A ESC.
2. Input voltage: 3-4S Lipo.
3. BEC: NO
4. Continue Current: 12A.
5. Burst current: 15A.
6. Firmware: BLHeli_32.

1. Model Number:XRotor-40A
2. Cont.Current:40A
3. Burst Current(10sec):60A
4. BEC:None
5. Lipo:2-6S
6. Programming:Timing (high/middle)
7. Weight:26g

1. Model: XSD20A Solder version
2. Processor: Silabs EFM8BB21
3. Battery: 12.6-16.8V (3-4S Lipo)
4. Current Rating: 20Amp
5. BEC: No (OPTO)
6. Signal frequency: 20-500Hz
7. Firmware: BLHeli_S (bootloader and firmware)
8. Supports: 1-2ms signal, Dshot600/Dshot300
9. BLHeli_S does Damped Light only

1. Stick Programming: Stick Programming/BLHeliSuite
2. Developed specifically for FPV drone racing multi-rotors
3. Supports BLHeli-S, Oneshot125
4. Compatible with various flight controllers and supports a signal frequency up to 621Hz
5. Twisted pair cable to throttle which reduces crosstalk.

1. Working voltage: DC12V
2. Temperature probe parameters: 50KB = 3950
3. Stall alarm minimum speed: 700-800 rpm

1. Model: Dual -Ubec
2. Input Voltage: 15V-42V
3. Output Voltage: 5.2V, 6.0V, 7.4V, 8.4V adjustable
4. Continuous: 8Amps
5. Peak: 16Amps 

1. Model: XRotor FPV G2
2. LiPo Power input: 3S-6S
3. Cont.Current: 65Ax4
4. Burst Current: 80Ax4
5. BEC Output: 5V@ 0.6A
6. Input wires: 12AWG-130mm (Red/Black)
7. Output Wire: No wires but solder tabs
8. Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no
9. Throttle Calibration: Supported
10. ESC Programming: BLHeliSuite32

1. Product: UBEC  (universal battery eliminator circuit)
2. Voltage: 5V
3. Current: 2A
4. Peak Current: 20A
5. Compatible battery: Li-po 2-4s

1. Item: D-SHOT Bullet ESC 12A
2. Continuous Current:12A
3. Burst current:15A
4. No of  cells:2-4S
5. Weight(g) without wires:2.4G

1. Model: ALPHA 40A
2. Brand: T-motor
3. Voltage: 4-6S ( 18-25.2V)
4. Current: 40A
5. Throttle range: 1100-1940μs
6. Special core program for multi-rotor controller greatly improve throttle response
7. Power by independence stabilivolt  IC supply microprocessor is with better antijamming performance for stability

1. Model Number:XRotor-40A
2. Cont.Current:40A
3. Burst Current(10sec):60A
4. BEC:None
5. Lipo:2-6S
6. Programming:Timing (high/middle)
7. Weight:26g

1. Model: ‎A-ESC70
2. Waterproof: Yes
3.  Voltage: 5V-7.5V
4. Current: 70A

1. Brushed/Brushless: BL
2. Cont./Peak Current: 30A/40A
3. Input: 2-3S LiPo
4. BEC Output: Linear mode:5V,2A
5. Input Wires: Red-18AWG-100mm*1, Black-18AWG-100mm*1
6. Output Wires:Black-18AWG-75mm*3

1. Product: F4 NOXE V3 FC acro + 35A ESC
2. MCU:  EFM8BB21F16G
3. Peak Current (A): 35
4. Input Voltage (V): 2-5S LIPO
5. PWM Digital I/O Pins: 4

Constant Current: 50A
Max Burst Current: 60A
Input Voltage: 7.4~22.2V (2~6S LiPoly)
BEC: OPTO