Motor Drivers
Showing 145–192 of 198 results
-
Servo Motor Drivers
Waveshare Direct Drive Servo Motor Driver Board, Integrates ESP32 and Control Circuit, 2.4G WiFi Support, Suitable for DDSM Series Hub Motors, ESP Now Support
Servo Motor DriversWaveshare Direct Drive Servo Motor Driver Board, Integrates ESP32 and Control Circuit, 2.4G WiFi Support, Suitable for DDSM Series Hub Motors, ESP Now Support
SKU:- BRAND: Waveshare
- CONTROLLER MODULE: ESP32
- POWER SUPPLY PORT: XT60, DC5525
- OMMUNICATION INTERFACE: Type-C × 2, UART
- WIRELESS COMMUNICATION: 2.4G WiFi
- MOUNTING HOLE DIAMETER: 3 mm
- HUB MOTOR PORT DDSM115, DDSM210
SKU: n/a -
-
Pololu Motor Drivers
Pololu High-Power Stepper Motor Driver 36v4
SKU:- Inputs compatible with 1.8Â V, 3.3Â V, and 5Â V logic
- Under-voltage lockout, over-current protection, short circuit protection, and reverse-voltage protection (up to 40Â V)
- High-power: can deliver up to 4Â A continuous per phase without extra cooling (6Â A max with sufficient additional cooling)
- Highly configurable through SPI interface
- Optional STEP/DIR control pins (stepping can also be controlled through SPI interface alone)
SKU: n/a -
Pololu Motor Drivers
Pololu DRV8838 Single Brushed DC Motor Driver Carrier
SKU:- Reverse-voltage protection on the motor supply
- H-bridge motor driver: can drive one DC motor
- Motor supply voltage: 0Â V to 11Â V
- Logic supply voltage: 1.8Â V to 7Â V
- easy to use with standard solderless breadboards
SKU: n/a -
Brushed / Brushless DC motor Driver
Cytron Smartdrive40 40Amp Dc Motor Driver (Peak 80Amp) Mds40A
SKU:- Bi-directional control for a single brushed DC motor.
- Support motor from 7V to 25V.
- Maximum current up to 80A peak (1 second), 40A (5 minutes) or 30A (> 20 minutes) continuously.
- 16 KHz switching frequency for quiet operation.
- Reverse polarity protection.
- LiPo battery low voltage warning.
- Thermal protection.
- Current limiting base on temperature.
SKU: n/a -
-
-
Brushed / Brushless DC motor Driver
Waveshare General Driver board for Robots, Based on ESP32
SKU:- Based on the ESP32-WROOM-32 module, supports wireless communication such as WIFI, Bluetooth and ESP-NOW
- Onboard motor control interfaces for 2x DC motor with encoder or 4x DC motor (2 groups) without encoder
- Onboard serial bus servos control interfaces for controlling up to 253 ST3215 serial bus servos and obtaining servos feedback
- Onboard 9-axis IMU to obtain attitude and heading information at any time
- Supports 7~13V power input, and can be powered directly by 2S or 3S lithium battery module
SKU: n/a -
-
-
-
Pololu Motor Drivers
Pololu MAX14870 Single Brushed DC Motor Driver Carrier
SKU:- No separate logic supply needed; inputs are 3V- and 5V-compatible
- Under-voltage lockout and protection against over-current/short-circuit and over-temperature
- Carrier board adds reverse-voltage protection
- Compact size (0.6″×0.5″)
SKU: n/a -
-
Stepper Motor Drivers
Nema17/23 Stepper Motor Driver MKS OSC PWM Pulse Signal Generator Module Motor Speed Frequency Direction Control Regulator
Stepper Motor DriversNema17/23 Stepper Motor Driver MKS OSC PWM Pulse Signal Generator Module Motor Speed Frequency Direction Control Regulator
SKU:- Signal type: PWM/ Pulse
- Frequency range: high 5.4k-160khz, medium 540-16.6khz and low 80-2.4khz
- Direction: clockwise / counterclockwise
- Voltage: 8v-24v
- Color: black
- Material: PC + metal
- Dimensions: 58×38.6mm
SKU: n/a -
-
Stepper Motor Drivers
MKS-LV8729-OC 1.5A Ultra Quiet Stepper Motor Driver for 3D Printers and CNC
SKU:- High-speed optocoupler, high-speed without losing a step
- LV8729 chip, with over-current protection circuit, the maximum support 128 segments
- Automatic half-flow function
- A variety of input methods to meet a variety of interface needs
- The use of increased heat sink, good heat dissipation
SKU: n/a -
-
Pololu Motor Drivers
Pololu AMIS-30543 Stepper Motor Driver Carrier
SKU:- Compatible with 5Â V and 3.3Â V microcontrollers
- Integrated 5V regulator that can be used to supply an external microcontroller
- Integrated watchdog function
- Open coil detection
- Thermal warning indicates when the driver is close to the thermal shutdown temperature
- Over-current status and shutdown (short-to-ground and shorted-load protection)
- Reverse voltage protection
SKU: n/a -
-
-
Brushed / Brushless DC motor Driver
M5Stack BLDC Motor Driver Unit (STM32)
SKU:- Motor driver chip: DRV11873PWPR
- Type of motor: Three-phase sensorless, brushless direct current (BLDC) motor
- Motor drive voltage: 5V(Powered by Grove port)
- I2C communication address: 0x65
- Output load capacity: DC5V/508mA
- Power dissipation: Standby current :DC5V/ 10.62mA
Working current :DC5V/13.20mA - Operating temperature: 0-40°C
- Product Size:Â 32*24*11.3mm
SKU: n/a -
Cytron Motor Drivers
Cytron Maker UNO RP2040 : Simplifying Robotics with Raspberry Pi RP2040
SKU:- Raspberry Pi RP2040 with dual-core Arm Cortex-M0+ processor.
- 264 KB RAM for efficient processing.
- Flash Memory 2 MB for storing programs and data.
- USB-C (5V) and LiPo/Li-Ion battery support.
6x Grove Ports and 1x Maker Port for versatile interfacing. - 4x dedicated ports for seamless servo motor integration.
SKU: n/a -
Pololu Motor Drivers
Pololu BD65496MUV Single Brushed DC Motor Driver Carrier
SKU:- Under-voltage lockout on the logic supply and protection against over-temperature
- Carrier board adds reverse-voltage protection on the motor supply
- Compact size (0.6″×0.6″)
- Built-in under-voltage and over-temperature protection
SKU: n/a -
-