Generic
Showing 3745–3792 of 6509 results
-
Digital Voltage, Current and Frequency Meter
White AC20-500V 0-100A 0- 100Hz AD16-22FVAH Square Cover LED Voltage Current Hertz 3 in 1 Indicator
Digital Voltage, Current and Frequency MeterWhite AC20-500V 0-100A 0- 100Hz AD16-22FVAH Square Cover LED Voltage Current Hertz 3 in 1 Indicator
SKU:- Easy for installation
- Compact & small in size
- This is a 3 in 1 display voltmeter,ammeter, hertz meter
- Good environmental Protections
- Very low Power consumption
SKU: n/a -
-
-
Multi Layer Ceramic Capacitors (MLCC)
220pF 0805 Surface Mount Multilayer Ceramic Capacitor (Pack of 50)
Multi Layer Ceramic Capacitors (MLCC)220pF 0805 Surface Mount Multilayer Ceramic Capacitor (Pack of 50)
SKU:- Capacitance: 220 pF
- Voltage: 50V
- Mounting type: SMD/SMT
- Operating temperature: -55ºC to 125ºC
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen Free compliant
SKU: n/a -
Pull and Push Rod for Servo
D1.5x520mm Z type Push/Pull Steel Rod for RC Aircraft Aero-modelling-2Pcs
Pull and Push Rod for ServoD1.5x520mm Z type Push/Pull Steel Rod for RC Aircraft Aero-modelling-2Pcs
SKU:Push/Pull Steel Rod Wire is steel wire with spring material used to connect RC plane’s Direction flaps to servomotor horn. Z Type Push-Pull Rod, a necessary part for model aeroplane control horn quick adjusting.
SKU: n/a -
(ESC) Drone Speed Controller
Favorite LittleBee 30A-S OPTO Electronic Speed Controller (Original)
SKU:-
- Battery: 6-25.2V (2-6S Lipo).
- Current Rating: 30amp / 35amp burst.
- MCU: SILABS EFM8BB21F16, MCU running at 48MHz.
- Dedicated driver chip.
- OPTO ESC.
- PCB board: 4 layer blind pole board, 3 oz copper.
SKU: n/a -
-
-
Switch Mode Power Supply
ZVS Driver Board for Tesla Coil Power Supply Board Induction Heating Module
SKU:- Working voltage: DC 12-30V
- Power requirements:  12V ≥ 5A
- Operating frequency: 30Hz-50KHz adaptive;
- Arc length: 1-5cm
- Output voltage and power: about 10000V60W when 12V/5A is input; Input 24V/12A, output about 2000V 200W.
- Maximum power: 180-360W
- Plate size: 75*70.6mm
SKU: n/a -
-
-
Audio Amplifier Module
YL2020 20W+20W D Class 12V-24V Mini Digital Power Amplifier Module
SKU:- Sam class D digital amplifier module
- Two-channel stereo.
- Power supply voltage 8v- 24v
- The maximum dynamic current:4 A
- Static current < 40mA
- Input signal:500 mV
- IMpedance 4-8 Europe
- Rated Power 20W*2
- PCB Size 38*20*2.8MM PIN Width :2.54MMX12, Length 40MM
SKU: n/a -
-
Other 3D Printer Accessories
MKS MOSFET Heating Controller for 3D Printer heat Bed/Extruder
SKU:- The superior performance of MOSFET (Max 280A).
- An extra-large heat sink, the maximum current can be up to 30A or more.
- Can use hot-bed output signal of Ramp1.4 and MKS series to control.
- Can use the digital signal of 5-24v to control.
SKU: n/a -
-
-
-
-
-
Cooling Fans
DC24V 3510 Hydraulic Cooling Fan with XH2.54-2P 30CM Cable Size:35*35*10MM
SKU:- Perfectly fit on the extruder
- Noiseless Performance
- Rated Voltage(VDC):12
- Operating Voltage Range(VDC):6.0 to 13.5
- Rated Input Current(Amp):0.06
- Very low Current consumption
- Easy to install and connect.
SKU: n/a