Generic
Showing 2833–2880 of 6509 results
-
-
Case for Arduino
Transparent White UNO R3 Injection Molding Case with Bubble
SKU:- For Arduino UNO R3 Development Board only.
- To protect your little computer against damage, dust, and scratches Clear the Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a -
Buck Converter
DC-DC 0-32V 12A, Constant Current LCD, Digital Display, Adjustable Voltage Buck, Step Down Power, Supply Module Board, （With Case）
Buck ConverterDC-DC 0-32V 12A, Constant Current LCD, Digital Display, Adjustable Voltage Buck, Step Down Power, Supply Module Board, （With Case）
SKU:- Working Voltage: DC 5.3V-32V
- Output Voltage: DC 1.2V-32V
- Output Current: 12A (12A need a heat sink, 8A is stable for long time)
- Output Power: 160W(160W need heat sink, 120W is for 8A)
- Voltage Display Range: 0 -32V
- Voltage Display Precision: ±0.5V
- Voltage Display Resolution: 0.05V
- Current Display Range: 0 -12A
- Current Display Precision: ±0.3A
- Voltage Display Resolution: 0.01A
- Conversion efficiency: About 96%
SKU: n/a -
-
-
-
Pull and Push Rod for Servo
D1.2x160mm Z type Push/Pull Steel Rod for RC Aircraft Aero-modelling-2Pcs
Pull and Push Rod for ServoD1.2x160mm Z type Push/Pull Steel Rod for RC Aircraft Aero-modelling-2Pcs
SKU:Push/Pull Steel Rod Wire is steel wire with spring material used to connect RC plane’s Direction flaps to servomotor horn. Z Type Push-Pull Rod, a necessary part for model aeroplane control horn quick adjusting.
SKU: n/a -
-
-
(ESC) Drone Speed Controller
One Shot BLHeli_32 35A 32 bit 2-5S ESC
SKU:- Input: 2-5S input Maximum input 6S (close brake)
- 32bit architecture
- Telemetry capability (voltage, current, temperature, speed)
- All inputs and outputs are protected against overvoltage (~30V) and under voltage (~-30V). 3,3 and 5V capable
- Supports all common Dshot commands like Turtle Mode, 3D mode and change of rotation
- Overcurrent protection (measures the current and reduces it to max. 40A)
SKU: n/a -
-
Multi Layer Ceramic Capacitors (MLCC)
470nF 1206 Surface Mount Multilayer Ceramic Capacitor (Pack of 20)
Multi Layer Ceramic Capacitors (MLCC)470nF 1206 Surface Mount Multilayer Ceramic Capacitor (Pack of 20)
SKU:- Capacitance: 470 nF
- Voltage: 50V
- Mounting type: SMD/SMT
- Operating temperature: -55ºC to 125ºC
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen Free compliant
SKU: n/a -
Multi Layer Ceramic Capacitors (MLCC)
470nF 0805 Surface Mount Multilayer Ceramic Capacitor (Pack of 30)
Multi Layer Ceramic Capacitors (MLCC)470nF 0805 Surface Mount Multilayer Ceramic Capacitor (Pack of 30)
SKU:- Capacitance: 470 nF
- Voltage: 50V
- Mounting type: SMD/SMT
- Operating temperature: -55ºC to 125ºC
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen Free compliant
SKU: n/a -
-
Cooling Fans
DC24V 4020 Hydraulic Centrifugal Fan with XH2.54-2P 30CM Cable Size:40*40*20MM
SKU:- 35mm Radial Cooling fan.
- 24V 2-point Pin DC
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: n/a -
Multi Layer Ceramic Capacitors (MLCC)
33pF 0603 Surface Mount Multilayer Ceramic Capacitor (Pack of 50)
Multi Layer Ceramic Capacitors (MLCC)33pF 0603 Surface Mount Multilayer Ceramic Capacitor (Pack of 50)
SKU:- Capacitance: 33 pF
- Voltage: 50V
- Mounting type: SMD/SMT
- Operating temperature: -55ºC to 125ºC
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen Free compliant
SKU: n/a -
Switching IC
PL2303HX SSOP28 USB-to-Serial Bridge Controller IC (Revision A)
SKU:- Fully Compliant with USB Specification v2.0 (Full-Speed).
- On-Chip USB 1.1 transceiver, 5V ~ 3.3V regulator, and 12 MHz crystal oscillator.
- Supports RS232-like Serial Interface.
- Configurable 512-byte bi-directional data buffer.
- Supports remote wake-up from MODEM input signals.
- Two general-purpose I/O (GPIO) pins.
- Small footprint 28-pin SSOP IC package.
- RoHS compliant.
SKU: n/a -
Workbench Tools
7pcs 2.35mm Mini Drill Chucks For Rotary Power Tools Dia 0.5mm/1.0mm/1.5mm/2.5mm/3.0mm
Workbench Tools7pcs 2.35mm Mini Drill Chucks For Rotary Power Tools Dia 0.5mm/1.0mm/1.5mm/2.5mm/3.0mm
SKU:- Made of high-quality material, more durable.
- Ideal for use with hand drills or electric drills for drilling ABS
- Color: Gold
- Clamping diameter: 0.5mm/1.0mm/1.5mm/2.5mm/3.0mm
- Electric grinder cap aperture: 2.35mm
SKU: n/a -
3D Printer Nozzle
Cleaning Nozzle Drill 0.8mm (Price for Each Box, 10pcs/box)
SKU:- Length: 4cm
- Head Diameter: 0.8mm
- Shank Diameter: 3.17mm
- Size: 0.1 to 0.8(Approx.)
- Color: Purple
- These nozzle drill cleaners are powerful tools that any 3D printer owner must have.
- As blocks happen a lot during printing, nozzles must be cleaned to ensure flowing printing.
SKU: n/a -
-
Aluminium Heat Sink, Raspberry Pi Accessories
CM4-HEATSINK Special for Raspberry Pi CM4
SKU:- Product: CM4-HEATSINK
- Material: aluminum
- Color: Black
- Teeth Number: 7 rows and 14 columns
- Compatible with most Raspberry Pi cases
- Suitable for Auxiliary heat for Raspberry pi 2 model B/Raspberry Pi B+
SKU: n/a -
Case for Arduino
White ABS Plastic Case for UNO R3
SKU:- Made of high quality ABS plastic, provide good protective
- For Arduino UNO R3 Development Board only.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a