Generic
Showing 2641–2688 of 6509 results
-
-
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M Black- Standard version
SKU:- ATmega328 running at 16MHz with external resonator (0.5% tolerance).
- 100% Arduino compatible board.
- Max Output Current: 150mA.
- 0.8mm Thin PCB.
- USB connection off-board.
- Supports auto-reset.
- Onboard Power and Status LEDs.
SKU: n/a -
FPV Antennas and Trans-Receivers
TBS Triumph Antenna FPV With SMA Male Connector-(Copy)
SKU:- Connector:Â Male SMA.
- Polarization – RHCP
- Frequency Range: 5500 – 6000 MHz
- Gain: 1.26 dBic
- Axial Ratio: 0.74
- Antenna Length(mm): 82
Note: This is not an original TBS product, but a high-quality clone of one.
SKU: n/a -
-
-
PVC wire
3 Meter UL1007 26AWG PVC Electronic Wire (Black)
SKU:The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: n/a -
-
Linear Actuators
12V 150MM Stroke Length Linear Actuator 6000N 5mm/s
SKU:- Permanent magnet DC motor drive: Voltage 12VDC
- Self Locking Force: 6000N
- Working temperature: -20ºC to +63ºC
- Aluminium frame and extension tube
- Compact Design
- Built-in Limit Switch
- Low Noise
- Moisture-proof Surface
- Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
SKU: n/a -
-
-
Water TDS, pH, Flow, Level Sensor
XH-M203 12V 10A Water Level Controller Module
SKU:- Current: Operating – 200mA Relay Switch – 10A (Please note this is not the actual current that can handle the relay. we recommended up to 3A. If you are looking for higher current switching please add another high current switch with module relay.)
- Type:Â Â LED indicator for water level.
- I/O Pins: Water Level High input & Water Level Low input.
- Operating Voltage:Â AC12V DC12V.
SKU: n/a -
Relay Modules
XY-LJ02 6-30V Micro USB, Digital LCD Display Time, Delay Relay Module, Control Timer Switch, Trigger Cycle Timing
Relay ModulesXY-LJ02 6-30V Micro USB, Digital LCD Display Time, Delay Relay Module, Control Timer Switch, Trigger Cycle Timing
SKU:- Product Name:Delay Relay Module
- Â Product Number:XY-LJ02
- Â Working Voltage:DC 6V-30V or 5V Micro USB
- Â Control Current:10A(Max)
- Â Quiescent Current:15mA
- Â Working Current:50mA
-  Working temperature: -40~85℃
- Â Suitable for the battery: Storage Battery, Lithium battery
- Â Trigger signal source: High-level trigger (3.0V~24V), Low-level trigger (0.0V~0.2V), switching control (passive switch)
- Â Reverse protection: Yes
- Â Physical dimension:80*38*2.1mm
SKU: n/a -
-
Relay Modules
12V 6 Channel with Light Coupling Relay Module
SKU:- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: n/a -
Temperature Meter
STC-3028 AC110-220 Dual Display Dual Temperature Adjustable Temperature Controller with 1M Cable
Temperature MeterSTC-3028 AC110-220 Dual Display Dual Temperature Adjustable Temperature Controller with 1M Cable
SKU:- Model: STC-3008
- Optional Voltage: AC110-220
- Temperature Control Range: 0 ~ 100 ° C
- Screen Display: Dual Screen Dual Display
- Sensor: 1 x NTC Sensor (line length is about 1 meter)
SKU: n/a -
Bluetooth and NRF Modules
RF Nano Integrated NRF24L01 Wireless Module with Soldering
SKU:- Microcontroller: ATmega328P
- Â Nrf24L01+ 2.4G wireless
- Â Architecture AVR
- Â Operating Voltage 5 V
- Â Flash Memory 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- Â Clock Speed: 16 MHz
- Â Analog I/O: 8 Pins
- Â EEPROM 1 KB
- Â DC Current per I/O Pins: 40 mA (I/O Pins)
- Â Input Voltage: 7-12 V
- Â Digital I/O: 22 Pins
- Â PWM Output: 6
- Â Power Consumption: 19 m
SKU: n/a -
3D Printer Extruder Parts and Fans
MK8 all Metal Bowden Extruder Kit Left Side for 1.75mm Filament Bulk Parts
3D Printer Extruder Parts and FansMK8 all Metal Bowden Extruder Kit Left Side for 1.75mm Filament Bulk Parts
SKU:- Suitable for: Creality CR-10 Series 3D Printer
- Types: Left-hand side parts
- Bracket Dimensions: (LxWxH) mm: 50x62x64
- Mounting Holes Size: 5mm
- Colors: Red
- Main material: Metal, Mild Steel
SKU: n/a -
Super Capacitor
0.047F 5.5V DIP Super-Capacitor
SKU:- Type: Super-Capacitor
- Capacitance: 0.047F
- Operating Voltage: 5.5v
- Mounting type: DIP through-hole
- Minimum Operating Temperature: -25°C
- Maximum Operating Temperature: +70°C
- Equivalent Series Resistance: 40Ω
- Tolerance: -20% to +80%
- Capacitor Family: Electric Double Layer
- Package/Case: Radial
- Pitch: 4.5mm
SKU: n/a -
LED Dot Matrix Display
8×8 RGB 64 LED Dot Matrix Display Module
SKU:- LED colour: RGB
- Comm Pin -Anode pins
- Number of LED’s per board: 64
- LED layout: 8 x 8
- LED diameter: 5mm
- Forward voltage: 2V
- Forward current: 5 – 10mA
- Board Dimensions: 60 x 60 mm
- Number of pins: 16 (8 x 8)
- Pin length: 6mm
SKU: n/a -
Cooling Fans
DC 5V 4020 Hydraulic Centrifugal Fan with XH2.54-2P 30CM Cable Size:40*40*20MM
SKU:- 35mm Radial Cooling fan.
- 5V 2-point Pin DC
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: n/a -
IR and RF Transmitters and Receivers
RFM69HCW Wireless Receiving Module 868mhz
SKU:- Model: RFM69HCW
- Frequency:868MHz
- Power Output Capability:+20 dBm 100 mW
- Sensitivity:-120 dBm at 1.2 kbps
- Selectivity:16-tap FIR Channel Filter
- FSK Bit rates:1.2kbps to 300kbps
- Voltage range:1.8V to 3.6V
- Module Size:16X16mm
SKU: n/a -
Multi Layer Ceramic Capacitors (MLCC)
330nF 0603 Surface Mount Multilayer Ceramic Capacitor (Pack of 40)
Multi Layer Ceramic Capacitors (MLCC)330nF 0603 Surface Mount Multilayer Ceramic Capacitor (Pack of 40)
SKU:- Capacitance: 330 nF
- Voltage: 50V
- Mounting type: SMD/SMT
- Operating temperature: -55ºC to 125ºC
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen Free compliant
SKU: n/a -
-
-
Memory IC
N76E003AT20 IC-2Pcs.
SKU:The N76E003 provides up to 18 I/O pins under 20 pin package and rich peripherals including two UARTs, SPI, I²C, 6-ch PWM output, wake-up function, and Brown-out detector. The competitive features include a high precision <2% deviation 16 MHz Internal RC oscillator, and a high-resolution 12-bit 8 channel ADC.
SKU: n/a -
Relay Modules
433MHz 24V 4 Channel, Relay Module Wireless, Remote Control Switch (without Battery)
SKU:- Working Mode: Output selectable between Latching and Non Latching types
- Relay Board Operating voltage: DC24V
- Working current: 50 ~ 200mA
- the operating frequency: 433MHz
- Application: 4 x AC 230V up to 10A
SKU: n/a