Generic
Showing 1681–1728 of 7208 results
-
3D Printer Extruder Parts and Fans
2mm x 3mm PTFE Teflon Tube for 1.5 mm 3D Printer Filaments
SKU: 1308003- Color: White
- Inner diameter: 2 mm
- Outer diameter: 3 mm
- It is used for the E3D V6 Extruder.
- Operating Temperature Range: -180°C to +260°C
- It has unique lubricity and the surface is no sticky.
- Material: PTFE
- Length: 1 Meter
SKU: 1308003 -
RGB LED Strips and Drivers
5M Light Dance Party Decor Light Neon LED Lamp Flexible Rope Tube Waterproof LED Strip – Only EL Wire -WHITE
RGB LED Strips and Drivers5M Light Dance Party Decor Light Neon LED Lamp Flexible Rope Tube Waterproof LED Strip – Only EL Wire -WHITE
SKU: 1031032- Input Voltage:12 V
- Can offer 360 degrees of illumination
- Energy-saving, long lifetime
- Wire diameter: 2mm
- EL light length: 5M
- Lifetime: >12,000 hours
- Color: White
SKU: 1031032 -
Switch Mode Power Supply
RC Absorption Loop Module
SKU: 1794120- Suitable for DC/AC5-400V inductive loads (loads less than 1000W) to protect relay contacts or thyristors
- There is a varistor to prevent excessive voltage fluctuations and excessive currents from causing adhesion of relay contacts
- RC absorption relay can effectively provide the anti-interference ability of the circuit
SKU: 1794120 -
-
-
-
12 to 16 AWG
High Quality Ultra Flexible 12AWG Silicone Wire – red
SKU: R179507- Rated Voltage: 600V
- Rated Temperature: -60°C~+200°C
- Conductor: Tinned Copper
- Conductor construction: 680/0.08
- Insulation: Silicone Rubber
- Length: 300 m
- Note : 1 Qty = 1 Meter. The standard roll length is 300 meters
- Cable length will be continuous as per your ordered Qty.
SKU: R179507 -
Cooling Fans
DC12V 5015 Hydraulic Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
SKU: 1187514- 45mm Radial Cooling fan.
- 12V 2-point Pin DC
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: 1187514 -
-
DC Jacks
Black JS-910B 4mm Banana Socket Jack
SKU: 1794338-
Central threaded metal rod
-
Cap with plastic insulation and color-coded for easy identification.
-
Made of high-quality brass with a surface coated with nickel
-
Insulated for safety during use
-
Current rating of 36A
-
Voltage rating of 30VAC-60VAC
SKU: 1794338 -
-
-
-
-
-
Cooling Fans
DC24V 5015 Oil Containing Centrifugal Fan with XH2.54-2P 30CM Cable Size:50 x 50 x 15 mm
Cooling FansDC24V 5015 Oil Containing Centrifugal Fan with XH2.54-2P 30CM Cable Size:50 x 50 x 15 mm
SKU: 1187540- Model: R20XC
- USB Plug and Play.
- RFID reader 0-8cm Reading Distance.
- Win8/7/XP/Android Supported.
- S50/S70 Card Supported.
- OTG Phone Connection.
- Built-in buzzer and LED for identification.
SKU: 1187540 -
Smart Vision Cameras
1600X 3 in 1 USB Digital Microscope Camera Endoscope 8LED Magnifier with Stand 3-in-1 Type-c Electronic Magnifier Endoscope
Smart Vision Cameras1600X 3 in 1 USB Digital Microscope Camera Endoscope 8LED Magnifier with Stand 3-in-1 Type-c Electronic Magnifier Endoscope
SKU: 1150650- Specification: Magnification: 1600X
- Light source: 8 LED lights
- Resolution: 1920×1080, 640*480
- Pixel: 30W
- Focal length: 3-40mm manual adjustment
- Support Android 4.2 or above/widows/Mac system
SKU: 1150650 -
-
-
Other ESP WIFI Modules
ESP32-WROOM-32E 16M 128Mbit Flash WiFi Bluetooth Module
SKU: 975748- ESP32-D0WD-V3 embedded, Xtensa dual-core
- 32-bit LX6 microprocessor, up to 240 MHz
- 448 KB ROM for booting and core functions
- 520 KB SRAM for data and instructions
- 16 KB SRAM in RTC
- WiFi: 802.11b/g/n
- Bit rate: 802.11n up to 150 Mbps
SKU: 975748 -
3D Printer Extruder Parts and Fans
PC6-M10 Pneumatic Push in Bowden Extruder for 6mm tube J-Head fitting
3D Printer Extruder Parts and FansPC6-M10 Pneumatic Push in Bowden Extruder for 6mm tube J-Head fitting
SKU: 288374- Inside Diameter: 6mm
- Thread Size: M10
- PTFE Tubing Compatibility: 3mm ID PTFE Tubing (for 1.75mm Filament)
- Materials: Nickel Plated Brass
- Release Method: Elliptical John Guest Fitting
SKU: 288374 -
-
-
