Generic
Showing 1633–1680 of 7208 results
-
Linear voltage regulator IC
IC-LM2576S-12/NOPB
SKU: 1532813- 3.3-V, 5-V, 12-V, 15-V, and adjustable output versions
- Adjustable version output voltage range,1.23 V to
- 37 V (57 V for HV version) ±4% maximum over line and load conditions
- Specified 3-A output current
- Wide input voltage range: 40 V Up to 60 V for HV version
SKU: 1532813 -
-
Official Raspberry Pi Accessories
Micro USB-B (Female) to USB Type C (Male) Converter Adapter for Raspberry Pi 4-White
Official Raspberry Pi AccessoriesMicro USB-B (Female) to USB Type C (Male) Converter Adapter for Raspberry Pi 4-White
SKU: 1240981- Can be used for All development Board with C type port for 5V@3A supply
- Supports Reversible plug orientation
- Simple Plug and Play device, no driver software required.
- Supports High-speed data transfers
- Can be Use for Mobile and Tablets with Fast Charging support
- Compact and Light Weight
SKU: 1240981 -
-
-
DuPont / Jumper Cable
26AWG Pure Copper 40pin Dupont Wire Flexible Rainbow Color Flat Ribbon Cable-5 Meter
DuPont / Jumper Cable26AWG Pure Copper 40pin Dupont Wire Flexible Rainbow Color Flat Ribbon Cable-5 Meter
SKU: 547870- Length: 5 Meter
- Weight: 450 gm
- Diameter(Pitch): 1.27 mm
- Conductor Material: Copper.
- Compatible with 1.27mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
SKU: 547870 -
FPV Antennas and Trans-Receivers
915Mhz 100mW Mini Telemetry Kit
SKU: 674173- Very small size & Lightweight
- MAVLink protocol framing and status reporting
- Interchangeable air and ground modules
- Micro-USB port
- UART interface
- Error correction corrects up to 25% of bit errors
- Configurable through Mission Planner and APM Planner
- The demonstrated range of several kilometers with a small Omni antenna
SKU: 674173 -
Cooling Fans
DC5V 0.25A 5015 Hydraulic Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
SKU: 1187555- 45mm Radial Cooling fan.
- 5V 2-point Pin DC 0.25A.
- Type: Hydraulic
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: 1187555 -
IoT WIFI Smart Switches
220AC Acoustic-Light Sensor Switch Module Auto On Off Light Smart Switch For Corridor Bath Warehouse Staircase
IoT WIFI Smart Switches220AC Acoustic-Light Sensor Switch Module Auto On Off Light Smart Switch For Corridor Bath Warehouse Staircase
SKU: 975808- It is in a dormant state when in a lighting environment, for example in daytime
- It can be controlled by any sound and it will work In a dark environment, for example at night
- If the sensor feels sound, the controlled lamp will be light for about one minute.
- Working voltage: AC180-240V 50/60Hz
- Load power:≤60W (LED lights, incandescent) ≤ 35W (energy-saving lamps, fluorescent)
SKU: 975808 -
-
-
Bluetooth and NRF Modules
HC-05 4pin Bluetooth Module(Master/Slave) with Button
SKU: 617819- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
SKU: 617819 -
-
3D Printer Motor Drivers
DM542 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
3D Printer Motor DriversDM542 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
SKU: 1165428- Power supply: DC 24-60 (V)
- Current maximum: 4.5A
- Output phase current:1 .5A-4.5A
- Logic input current: 1 0-20mA
- Optical isolation signal input
- Output current DIP switch is adjustable
SKU: 1165428 -
-
-
-
-
-
Battery Pack Accessories & Holders
2 X 5 18650 Battery Holder with 18.5MM Bore Diameter
SKU: 1187460- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187460 -
-
-
-
Case for Arduino
Transparent Blue ABS Plastic Case for UNO R3
SKU: 766385- Made of high-quality ABS plastic, provide good protective
- For Arduino UNO R3 Development Board only.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: 766385 -
Electronic Switches/Keypads Modules
TTP226 8-way Capacitive Touch Switch Module
SKU: 617807- Onboard 8 key TTP226 capacitive touch induction IC.
- Onboard 8-way level indicator.
- Working voltage: 2.4 to 5.5 V.
- Modules, you can set the output mode, key output mode, the longest time and fast/low power output
SKU: 617807 -
