Generic
Showing 1393–1440 of 6509 results
-
Super Capacitor
0.22 F 5.5V DIP Super-Capacitor
SKU:- Type: Super-Capacitor
- Capacitance: 0.22F
- Operating Voltage: 5.5v
- Mounting type: DIP through-hole
- Minimum Operating Temperature: -25°C
- Maximum Operating Temperature: +70°C
- Tolerance: -20% to +80%
- Capacitor Family: Electric Double Layer
- Package/Case Radial
- Pitch: 4.5mm
SKU: n/a -
3D Printer Extruder Parts and Fans
3mm*4mm PTFE Teflon Tube for 3D Printer
SKU:- Color: White
- Inner diameter: 3 mm
- Operating Temperature Range: -180°C to +260°C
- Outer diameter: 4 mm
- It is used for the E3D V6 Extruder.
- It has unique lubricity and the surface is no sticky.
- Material: PTFE
- Length: 1 Meter
SKU: n/a -
Linear Actuators
Linear Actuator Stroke Length 200MM,7mm/S,1500N,12V
SKU:- Permanent magnet DC motor drive: Voltage 12VDC
- Self Locking Force: 1500N
- The current required to push 150KG is 1.5~2A
- Working temperature: -20ºC to +63ºC
- Aluminium frame and extension tube
- Compact Design
- Built in Limit Switch
- Low Noise
- Moisture-proof Surface
- Long life: A service life of more than 50000 times.
SKU: n/a -
Current and Voltage Sensor
5A 12V Overcurrent Protection AC Current Detection Sensor Module
SKU:LC 5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current
SKU: n/a -
Drone Gimbal and Accessories
BGC v3.15 MOS Large Current 2-axis Brushless Gimbal Controller Driver
SKU:- Stabilization Axes: 2
- Supply Voltage: 8V to 18V (3s-4s LiPo)
- Maximum DC current to each motor 2.8A
- Supported sensors: MPU6050
- Overcurrent protection: Yes
- Overheat protection: Yes
- Undervoltage protection: Yes
- Reverse polarity protection: Yes
- Support 2-8 series gimbal motor
- Peak current 10A
SKU: n/a -
-
Vibration/Tilt Sensor and Modules
801S Vibration Shock Sensor Module
SKU:- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
SKU: n/a -
Raspberry Pi Accessories
RTL8188 Mini USB wireless Network Card 300Mbps Wifi Dongle
SKU:- Mini portable USB 2.0 design.
- Wireless N speed up to 300Mbps, ideal for internet surfing and online gaming.
- Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards.
- MIMO technology makes wireless transmission rates up to 600Mbps wifi antenna.
- 600Mbps Wireless Wifi USB Dongle/Wireless USB Adapter/Wireless Network Card
SKU: n/a -
Metal Push Button Switch
12mm 12V Ring Light Self-Lock Non-Momentary Metal Switch-Yellow Light
SKU:- Stainless steel material for long-term use
- Inbuilt Colorful Ring illumination LED
- Available in Various LED Color
- Bright daylight LEDs
- Single pole push to make and Push to break Function
- Front and rear panel seal to IP67 &Â TVS protection
- Rubber ring and hexagon nut to fix, Waterproof and Dustproof
SKU: n/a -
Light Sensor
Photosensitive Resistor Sensor Module for Arduino
SKU:- This is a High-quality photosensitive sensor module/light module detects the photosensitive resistor for Arduino
- Resistance of the photoresistor is typically less than 80 Ohms (in full light)
- Dark resistance is typically greater than 20 Meg Ohms (in full darkness)
SKU: n/a -
-
-
6S Li-ion BMS
6S 40A 18650 Lithium Battery Protection Board
SKU:- Maximum discharge current: 40A
- Instantaneous discharge current: 70A
- Charging voltage: 25.5V
- Maximum charging current: 40A
- Overcharge detection voltage: 4.25±0.025V
- Overcharge protection delay: 1.0±0.5S
- Overcharge release voltage: 4.15±0.05V
- Battery balance detection voltage: 4.125±0.025V
- Battery balance release voltage: 4.125±0.05V
- Battery balance current: 41±5mA
- Working current: ≤40uA
SKU: n/a -
-
Battery Pack Accessories & Holders
2 X 6 18650 Battery, Holder with 18.5MM, Bore Diameter
SKU:- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: n/a -
-
Boost Converter
DC12-80V 600W High Power Adjustable Voltage Constant Current Module
SKU:- Module Type: Step-Up (Boost)
- Input voltage: 12V-60V
- Input Current: Maximum input current 15A
- Output voltage: 12V-80V adjustable
- Output Current: Maximum output current 10A
- Output Power: 600W
- Short circuit protection: Fuse (Input 20A Fuse)
- Overcurrent protection: Yes
SKU: n/a -
-
Battery Pack Accessories & Holders
2 X 4 18650 Battery Holder with 18.5MM Bore Diameter
SKU:- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: n/a -
Signal Generator Module & Oscilloscopes
ICL8038 12V to 15V, Signal Generator, Medium/Low Signal, Frequency 10Hz-450KHz, Triangular/Rectangular/S, ine Wave Generator, Module
Signal Generator Module & OscilloscopesICL8038 12V to 15V, Signal Generator, Medium/Low Signal, Frequency 10Hz-450KHz, Triangular/Rectangular/S, ine Wave Generator, Module
SKU:- Working voltage: 12V ~ 15V
- Output: Triangular wave, Square wave and sine wave.
- Frequency range: 10HZ ~ 450kHz
- Low distortion sine wave: 1%
- Duty cycle range: 2% to 98%
- Low temperature drift: 50ppm / ℃
- Triangular wave output linearity: 0.1%
- Working temperature: 0 ~ 70 ℃
- Board size: 54.5*37.8mm
SKU: n/a -
-
-
-
Environmental Sensors
Wind Speed Sensor Voltage Type(0-5V) Anemometer Kit (Waterproof & Industrial)
SKU:- High hardness, Corrosion protection.
- Waterproofness and High precision.
- The mode of its output signal：0-5V(Voltage signal).
- supply voltage: DC 12-24V.
- Power consumption：Voltage MAX≤0.3W.
- Start wind speed：0.4-0.8m/s.
SKU: n/a -
-