Generic
Showing 1345–1392 of 7200 results
-
-
-
IMU, Accelerometer, Magnetometer & Gyroscope
GY-271 QMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor -(China Chip)
IMU, Accelerometer, Magnetometer & GyroscopeGY-271 QMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor -(China Chip)
SKU: 419760- 3-axis magnetic electronic compass.
- Precise heading information.
- Operating Voltage: 3 -5 V DC.
- Driver Chip: QMC5883L.
- Communication: I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
SKU: 419760 -
Digital Voltage, Current and Frequency Meter
0.56inch 0-100V Three Wire LED Display Digital DC Voltmeter-Green
Digital Voltage, Current and Frequency Meter0.56inch 0-100V Three Wire LED Display Digital DC Voltmeter-Green
SKU: 309466- Operating Voltage: 0-100 VDC
- It is a 3-wire display.
- LED Color: Green
- Current Consumption : <40 mA
- Accuracy: 0.1 V.
- Refresh Speed : Approx 200mS/time.
- The display on Voltage: 3 V.(but not measure accurately up to 3.6V).
SKU: 309466 -
Plastic Gear Box Motor
DC Motor – 10RPM – 12Volts
SKU: 5643- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 10 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 7
- Stall Torque(kg-cm): 28
SKU: 5643 -
Signal Generator Module & Oscilloscopes
SG-002 Analog 0-12V 0-24mA Signal Generator for PLC and Panel Debugging & Device Testing
Signal Generator Module & OscilloscopesSG-002 Analog 0-12V 0-24mA Signal Generator for PLC and Panel Debugging & Device Testing
SKU: 1187642- Power Supply: external micro USB-5V.
- Voltage Output: 0-12V.
- Current Output: 0-22mA.
- Multiple Display: Just push the small button to switch the display mode
- Product Dimension: 100mm x 70mm x 38mm
SKU: 1187642 -
-
Cable Splices
1.5mm Electrical Waterproof Seal Heat Shrink Splice Wire Sleeve White 4pcs
SKU: 471362- Shrinkage ratio: 2:1.
- Tubing: Polyolefin.
- Operating temperature : -55℃ ~ 125℃.
- Minimum shrink temperature: 80℃.
- Starting temperature of solder melt: 138℃.
- Minimum full recovery temperature: 160℃.
SKU: 471362 -
-
-
Cooling Fans
Small 5V 0.14A Turbo Air Intake Fan (Size: 40x40x20mm)
SKU: 1226458- Operating Voltage: 5V DC
- Operating Current: 140mA
- Normal Operating Temperature: 25°C-45°C.
- Weight: 26 gm.
- Life Expectancy: Dual Ball Bearing: 50000 hours.
- Sleeve Bearing: 20000-25000 hours.
- Reliable quality as well as Competitive price.
- Large volume flow and long life expectancy.
- High speed and large air flow.
- Low noise and high efficiency.
SKU: 1226458 -
-
-
Raspberry Pi Hats
Raspberry Pi GPIO Multi-function Expansion Board for PI 4B/3B/3B+
SKU: 51867- Perfect snap-in terminal for simple Raspberry PI connectivity.
- Multifunction GPIO expansion board.
- Easily connect Raspberry connectors and pins using jumpers.
- Compatible with Raspberry Pi 4B/3B/3B+.
SKU: 51867 -
Carbon Fiber Tubes and Rods
3K Roll-wrapped Carbon Fibre Tube (Hollow) 10mm(OD) * 8mm(ID) * 1000mm(L)
Carbon Fiber Tubes and Rods3K Roll-wrapped Carbon Fibre Tube (Hollow) 10mm(OD) * 8mm(ID) * 1000mm(L)
SKU: 653501- Made of Carbon Fiber material
- High Strength
- Stable dimension and UV resistant
- High Corrosion Resistance
- High Thermal Conductivity in some forms
- Low coefficient of thermal expansion
- Non-poisonous
SKU: 653501 -
-
Electronic Switches/Keypads Modules
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
Electronic Switches/Keypads ModulesCapacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
SKU: 399049It can control LED module, light and so on. It is available for indoor LED, lighting lamp, DIY automotive lights dimming refit.
With Single touch, using the principle of capacitance touch. The default function is a switch, dimming, with brightness memories LED touch dimming. It will light slowly when turning on the lights, and become dark slowly when turn off, which effectively avoid the stimulation to eyes.
SKU: 399049 -
-
-
3D Printer Extruder Kit
1.75mm Bowden Extruder Full Kit
SKU: 971698This All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.4 mm Nozzle contains the same signature high-temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. This kit contains the thermistor, heater block, 0.4 mm Nozzle, sleeving, cooling fan with holder.
SKU: 971698
