Generic
Showing 1201–1248 of 7202 results
-
-
3D Printer Extruder Parts and Fans
100k NTC Thermistor With Copper Tip for MK8 Extruder
SKU: 699590- Temperature range of use: −40°C to 270°C.
- Dissipation power factor: ≥5 mW/℃ (static in the air).
- 100k Ohm NTC Thermistor.
- NTC Thin Film Thermistor Cable.
- Max power rating: 45 mW
- The hot time constant: ≤7 s(in the air)
SKU: 699590 -
-
-
Spacer and Standoff
M4 X 5 mm Female to Female Brass Hex Threaded Pillar Standoff Spacer – 12 Pcs.
SKU: 878515- Versatile and easy to fit.
- Lock PCB securely into place.
- Hexagonal design allows tightening with a wrench.
- The brass metal itself provides good resistance to oxidation and corrosion.
SKU: 878515 -
-
Buck Converter
48V36V24V to 19V12V9V5V3V Adjustable Synchronous Stepdown Module / Car Charging Power Supply
Buck Converter48V36V24V to 19V12V9V5V3V Adjustable Synchronous Stepdown Module / Car Charging Power Supply
SKU: 975695- Input Voltage: 6.5V-60V
- Output Voltage: 1.25-30V
- Adjustable Efficiency: 97% (MAX)
- Load capacity: large 5A
- Wiring method: the terminal is free of soldering, IN is input, OUT is output.
SKU: 975695 -
-
4S Li-ion BMS
4S High Current up to 30A Lithium Battery Protection Board Four Series of 14.8V 16.8V
SKU: 502572- Overcharge detection voltage: 4.25 ± 0.025V
- Overcharge release voltage: 4.15 ± 0.05V
- Over-discharge detection voltage: 2.50 ± 0.08V
- Over-discharge termination voltage: 3 ± 0.1V
- Overcurrent: 20-30A
- Working current: 15A
SKU: 502572 -
USB Interface Module
CH375B USB Disk Read-write Module USB Flash Disk For Arduino
SKU: 43435- 2×8 connector, easy with the MCU mount.
- Jumper selectable can work in parallel or serial mode.
- On board 3.3 V LDO 1117, provides 800 mA current.
- 5 V power supply is powered by the target board.
- 12 MHZ crystal.
SKU: 43435 -
Lipo Voltage Checker
Cell Checker with Low Voltage Alarm (2S-8S) with case
SKU: 4091- Input: 2S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 4091 -
RC Car Wheel
65mm Robot Smart Car Wheel for BO Motors (Red)
SKU: 31485- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Red
SKU: 31485 -
-
-
-
Interfacing and USB Cables, Boost Converter
USB Power DC 5V 1A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
Interfacing and USB Cables, Boost ConverterUSB Power DC 5V 1A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
SKU: 1165405- Voltage : Input through (USB) DC 5V
- Output via (DC Round Pin) : DC 12V
- Cable Length: 1 meter / 2 meter
- Color: BLACK
- Input / Output Current: Maximum input 1
SKU: 1165405 -
-
Sleeves and Drag Chain
Nylon 14mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457736- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457736 -
IoT and Wireless on Sale, USB Interface Module
MINI V2.1 ELM327 OBD2 Bluetooth Interface Auto Car Scanner
-6%
IoT and Wireless on Sale, USB Interface ModuleMINI V2.1 ELM327 OBD2 Bluetooth Interface Auto Car Scanner
SKU: 223563-
The newly developed wireless scan tool.
-
It supports most of the OBD-II protocols.
-
Bluetooth connection, no Batteries, Cables, or Switches.
-
Wireless (Bluetooth) 5~10 meter
-
Retrieve Fault Codes (DTCs) and clear Check Engine lights.
-
Clear trouble codes and turn off the MIL (“Check Engine” light)
- Set the maximum number of responses to obtain
SKU: 223563 -
-
-
-
-
-
N20 Metal Gear Motors
N20-3V-15 RPM Micro Metal Gear-box DC Motor
SKU: 475044- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 475044
