Generic
Showing 1153–1200 of 6509 results
-
-
-
-
Sleeves and Drag Chain
Nylon 14mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU:- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: n/a -
Relay Modules
5V 6 Channel Low Level Relay Module with Light Coupling
SKU:- 6-way relay output module contact capacity is 10A 250V.
- input IN1, IN2, IN3, IN4, IN5, IN6 signal, a low level is effective.
- Using single-chip design, reliable performance, strong anti-interference, no false triggering, superior performance.
- The trigger terminal has optocoupler isolation, the independent external power supply can trigger completely isolated.
- Each relay has an activity indicator light. With 4 fixed bolt holes, easy installation.
- Support all SCM control. It is applicable to the industrial sector, PLC control and home intelligent control.
SKU: n/a -
-
-
-
4S Li-ion BMS
4S High Current up to 30A Lithium Battery Protection Board Four Series of 14.8V 16.8V
SKU:- Overcharge detection voltage: 4.25 ± 0.025V
- Overcharge release voltage: 4.15 ± 0.05V
- Over-discharge detection voltage: 2.50 ± 0.08V
- Over-discharge termination voltage: 3 ± 0.1V
- Overcurrent: 20-30A
- Working current: 15A
SKU: n/a -
Lead Screw and Nut
1000mm Trapezoidal 4 Start Lead Screw 10mm Thread 2mm Pitch Lead Screw with Copper Nut
Lead Screw and Nut1000mm Trapezoidal 4 Start Lead Screw 10mm Thread 2mm Pitch Lead Screw with Copper Nut
SKU:- Lead Screw Material: 304 Stainless Steel.
- Length: 1000mm.
- Diameter: 10 mm.
- 4 Start Lead Screw
- Brass Nut Size: 32(Body Diameter) x 19 mm.
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
SKU: n/a -
-
USB Interface Module
MINI V2.1 ELM327 OBD2 Bluetooth Interface Auto Car Scanner
SKU:-
The newly developed wireless scan tool.
-
It supports most of the OBD-II protocols.
-
Bluetooth connection, no Batteries, Cables, or Switches.
-
Wireless (Bluetooth) 5~10 meter
-
Retrieve Fault Codes (DTCs) and clear Check Engine lights.
-
Clear trouble codes and turn off the MIL (“Check Engine” light)
- Set the maximum number of responses to obtain
SKU: n/a -
-
Gas and Dust Sensor
MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module
SKU:- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
SKU: n/a -
Plastic Push Button Switch
12x12x7.3 mm Round Cap for Square tactile Switch – Black (10 Pcs.)
SKU:- Easy to install, good quality for long time use
- Great replacement for the old or broken buttons cap on the tactile switch
- Fits on a 12 x 12 x 7.3 mm tactile push button switch.
- Contact resistance: 50m Max (initial)
- Insulation resistance: 100 M min DC (250 V)
SKU: n/a -
PVC wire
5 Meter UL1007 26AWG PVC Electronic Wire (Black)
SKU:The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: n/a -
N20 Metal Gear Motors
N20-3V-15 RPM Micro Metal Gear-box DC Motor
SKU:- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: n/a -
Drone Motor
2312 920KVR Brushless DC Motor for Drone (CW Motor Rotation)
SKU:- Motor KV: 920 (RPM/V)
- No-Load Current (Io/10V): 0.45 Amps
- Li-PO Batteries: 2S-4S
- Motor Resistance (Rm): 0.117 Ohms
- Max Continuous Current: 14 Amps
- Max Power: 220 Watts
- Shaft Diameter: 8mm (Unthreaded) & 6mm (Threaded)
SKU: n/a -
Boost Converter
XL6019 DC-DC 5A Adjustable Boost Power Supply Module
SKU:- Model: XL6019
- Product: Adjustable Boost Power Supply Module
- Input Current: 5A (MAX)
- Input Voltage: DC 3-35 V Switching
- Working Temperature: Industrial (-40 ° C to + 85 ° C)
- Negative Output Voltage: DC 5-40V (Adjustable)
- Frequency: 220 kHZ
SKU: n/a -
Boost Converter, Interfacing and USB Cables
USB Power DC 5V 1A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
Boost Converter, Interfacing and USB CablesUSB Power DC 5V 1A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
SKU:- Voltage : Input through (USB) DC 5V
- Output via (DC Round Pin) : DC 12V
- Cable Length: 1 meter / 2 meter
- Color: BLACK
- Input / Output Current: Maximum input 1
SKU: n/a -
-
-
-
-
-
Buck Converter
48V36V24V to 19V12V9V5V3V Adjustable Synchronous Stepdown Module / Car Charging Power Supply
Buck Converter48V36V24V to 19V12V9V5V3V Adjustable Synchronous Stepdown Module / Car Charging Power Supply
SKU:- Input Voltage: 6.5V-60V
- Output Voltage: 1.25-30V
- Adjustable Efficiency: 97% (MAX)
- Load capacity: large 10A
- Wiring method: the terminal is free of soldering, IN is input, OUT is output.
SKU: n/a -