Generic
Showing 1105–1152 of 7189 results
-
-
Raspberry Pi Accessories
5V 3A Raspberry Pi AC 100-240V DC 15W EU Plug USB Power Supply Adapter Charger
Raspberry Pi Accessories5V 3A Raspberry Pi AC 100-240V DC 15W EU Plug USB Power Supply Adapter Charger
SKU: 51981- This item is One DC 5V 3A 15W USB Universal external switching power adapter.
- Solve the problem of insufficient power supply mobile hard disk.
- Wide input range, high precision voltage.
- Input Voltage: AC100-240V
- Output Output: 5V
- Output Current: 3A
SKU: 51981 -
Sleeves and Drag Chain
Nylon 25mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457748- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457748 -
-
RGB LED Strips and Drivers
250W High Power Constant voltage Current Adjustable Aluminum Substrate LED Driver Module
RGB LED Strips and Drivers250W High Power Constant voltage Current Adjustable Aluminum Substrate LED Driver Module
SKU: 405563- DIY a stabilized power supply, input 12V is ok, the output can be adjustable in the range of 12~50V.
- Offer power for your electronic equipment, you can set the output voltage value according to your system voltage.
- As the car power supply offer power for your laptop, PDA or a variety of digital products.
- A high-power notebook mobile power DIY: coupled with a large-capacity 12V lithium battery pack
- Solar panel voltage regulator.
- Charge for the storage battery, lithium battery etc.
- Drive high-power LED lights.
SKU: 405563 -
-
-
Current and Voltage Sensor
ACS712 20A Current Sensor IC (ACS712ELCTR-20A-T)
SKU: 618488- 80 kHz bandwidth.
- Total output error 1.5% at TA = 25°C.
- Small footprint, low-profile SOIC8 package.
- 1.2 mΩ internal conductor resistance.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
- 5.0 V, single-supply operation.
- 66 to 185 mV/A output sensitivity.
SKU: 618488 -
Brushed / Brushless DC motor Driver
L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
SKU: 699566- Motor Power Range: 4.5V ~ 36V
- Control supply range: 4.5V ~ 9V
- Logical operating current Iss: ≤60mA
- Driving part of the work current Io: ≤1.2A
- Maximum power dissipation: 4W (T = 90 ℃)
- Operating temperature : -25 ℃ ~ + 125 ℃
- Drive Type: Dual high-power H-bridge driver
SKU: 699566 -
-
Battery Pack Accessories & Holders
3 X 3 18650 Battery, Holder with 18.5MM, Bore Diameter
SKU: 1121242- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1121242 -
Plastic Push Button Switch
12x12x7.3 mm Round Cap for Square tactile Switch – Blue (10 Pcs.)
SKU: 890232- Easy to install, good quality for long time use
- Great replacement for the old or broken buttons cap on the tactile switch
- Fits on a 12 x 12 x 7.3 mm tactile push button switch.
- Contact resistance: 50m Max (initial)
- Insulation resistance: 100 M min DC (250 V)
SKU: 890232 -
-
Other 3D Printer Accessories
Reprap StepStick heat sink, 9*9*12MM cooler Aluminum, heat dissipation suitable for, drv8825/A4988/A4983/MKS, TMC2100 Mendel
Other 3D Printer AccessoriesReprap StepStick heat sink, 9*9*12MM cooler Aluminum, heat dissipation suitable for, drv8825/A4988/A4983/MKS, TMC2100 Mendel
SKU: 1121398- Quantity of blade:
- Material: Aluminum
- Color: Black
- Blade thickness:
- Base plate thickness:
- Compatible with:drv8825/A4988/A4983/MKS TMC2100 Mendel
- Dimensions: 9x9x12 mm
SKU: 1121398 -
Switch Mode Power Supply
1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Boost converter Module
Switch Mode Power Supply1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Boost converter Module
SKU: 975677- Input voltage: 8 to 60V
- Input Current: 10V-30V input voltage, maximum current is 35A-40A; 31-60V input voltage, maximum current is 30A-35A
- Quiescent current: 15mA (measured at 12V to 20V, the higher output voltage will increase the quiescent current)
- Output voltage: 12 – 97V continuously adjustable
- Output Current: 35A MAX,
SKU: 975677 -
Audio Amplifier Module
5.1 channel USB Sound Card for Raspberry Pi and Computers
SKU: 815865- Plug and Play device no software installation needed
- Easy and portable
- Works and all major operating systems
- Supports 5.1 Surround and 3D sound
- No external power supply needed
- Boost the signals for Headsets
SKU: 815865 -
-
Panel Indicator Lights
Red AC/DC24V 16mm AD16-16SM LED Signal Indicator Built-in Buzzer
SKU: 1364626- Model: AD16-16SM
- Easy for installation
- LED Signal Indicator Built-in Buzzer
- Good environmental Protections
- Very low Power consumption
- Available in various sizes, colors, and voltage rating
SKU: 1364626 -
-
-
Interface Connector
HDMI-Compatible Virtual Display Emulator 4K HD DDC EDID Dummy Plug Dongle
SKU: 1187617- Cheapest Price in Market
- Supports up to 3840×2160@60Hz, 1080@120Hz DVI EDID Emulator
- Small compact size and Stylish dongle
- Useful for Crypto Mining Headless PCs
- Port: Standard HDMI Male
SKU: 1187617 -
IMU, Accelerometer, Magnetometer & Gyroscope
GY-273 QMC5883L 3 Axis Module Magnetic Field Sensor
SKU: 157027- QMC5883L module (three-axis magnetic field module)
- Model: GY-273
- IC: QMC5883L
- I2C interface
- 1-2 degree heading accuracy
- Integrated 12-bit ADC
- 160Hz max data rate
- A range of -8 to +8 Gauss
SKU: 157027 -
-
-
Digital Voltage, Current and Frequency Meter
Red AC/DC24V 22mm AD16-22SM LED Signal Indicator Built-in Buzzer
Digital Voltage, Current and Frequency MeterRed AC/DC24V 22mm AD16-22SM LED Signal Indicator Built-in Buzzer
SKU: 1364628- Model: AD16-22SM
- Easy for installation
- LED Signal Indicator Built-in Buzzer
- Good environmental Protections
- Very low Power consumption
- Available in various sizes, colors, and voltage rating
SKU: 1364628 -
Plastic Push Button Switch
12x12x7.3 mm Round Cap for Square tactile Switch – White (10 Pcs.)
SKU: 890235- Easy to install, good quality for long time use
- Great replacement for the old or broken buttons cap on the tactile switch
- Fits on a 12 x 12 x 7.3 mm tactile push button switch.
- Contact resistance: 50m Max (initial)
- Insulation resistance: 100 M min DC (250 V)
SKU: 890235 -
-
-
