Generic
Showing 1009–1056 of 7189 results
-
-
-
-
Multi Layer Ceramic Capacitors (MLCC)
100nF 0603 Surface Mount Multilayer Ceramic Capacitor
SKU: 594998- Capacitance: 100 nF
- Voltage: 50V
- Mounting type: SMD/SMT
- Operating temperature: -55ºC to 125ºC
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen Free compliant
SKU: 594998 -
Cooling Fans
DC 24V 5015 Hydraulic Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
SKU: 1187539- 45mm Radial Cooling fan.
- 24V 2-point Pin DC
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: 1187539 -
Sleeves and Drag Chain
Nylon 20mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457746- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457746 -
-
-
Other Metal Geared Motors
30RPM 12V Low Noise Dc Motor With Metal Gears – Grade A
SKU: 1137801- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 30 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 5.7
- Stall Torque(kg-cm): 18
SKU: 1137801 -
Battery Chargers, Battery Charging Boards
2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266
Battery Chargers, Battery Charging Boards2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266
SKU: 1031024- Output port: USB or expansion port
- Output parameter 5V / 3A or 3.3V / 1A.
- Conversion efficiency up to 95%
- Input port: MICROUSB
SKU: 1031024 -
-
-
-
-
-
Relay Modules
12V 4 Channel Relay Module
SKU: 618377- 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Both controlled by 12V and 5V input Voltage.
- Equipped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low).
- Indication LED’s for Relay output status.
SKU: 618377 -
Temperature & Humidity Sensor
3 Pin NTC Thermistor Temperature Sensor Module
SKU: 365937- Adopt the NTC thermistor sensor, sensitivity is good
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
- With potentiometer to adjust the temperature detection threshold
- Working voltage: 3.3 V to 5 V
- Output form: digital switch output (0 and 1)
- It has a fixed bolt hole, convenient installation
SKU: 365937 -
Battery Chargers, Battery Charging Boards
XH-M604 6V-60V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power
Battery Chargers, Battery Charging BoardsXH-M604 6V-60V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power
SKU: 1121440- Input Voltage: DC 6-60V
- Display Accuracy: 0.1V
- Control Accuracy: 0.1V
- Output Type: direct output
- Voltage Tolerance: ±0.1V
- Apply For:6-60V Lithium Lead-acid battery
SKU: 1121440 -
Robotics Kits
10Pin Alligator Clips Jumper Wires Crocodile Dupont Line with Female Connector Cable for DIY Connection – 20cm
Robotics Kits10Pin Alligator Clips Jumper Wires Crocodile Dupont Line with Female Connector Cable for DIY Connection – 20cm
SKU: 1017145- Colour: Red, Blue, Yellow, White and Black.
- Cable Length: 20 cm
- Connector Type: Crocodile Pins and Female Dupont Connector
- Color-coded insulated leads allow you to test circuits without crossing wires or causing shorts with each other.
SKU: 1017145 -
-
-
3D Printer Extruder Kit
All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle
3D Printer Extruder KitAll complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle
SKU: 422131This All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle contains the same signature high-temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. This kit contains the thermistor, heater block, 0.2 mm Nozzle, sleeving, cooling fan with holder.
SKU: 422131 -
-
Raspberry Pi Accessories
HDMI Female to HDMI Male Right, Angle Adapter for Raspberry Pi 3
SKU: 1121311- Supports resolutions up to 4Kx2K (UHD) including 4096×2160, 3840×2160, 2560×1600, 2560×1440, 1920×1200 & 1080p
- HDMI Male-Female Adapter Right Angle 90 Degree
- Gold Plated HDMI Male to Female Connector Supports 4K for TV Stick
SKU: 1121311 -
TowerPro and Other Servo Motors
Ultra Torque Quarter Scale 60kgcm Metal Gear Servo Motor
SKU: 618521- Operating voltage: 6 V to 8.4 V
- Durable Metal Gear
- Dual Ball Bearing
- Programmable Digital Amplifier with Mosft Drive
- Bottom Side Axial Mount Hole
- Less Noise
- Gear Type: All Metal Gears
- Stable and shock proof double ball bearing design
- Operating Angle: 180 degree
SKU: 618521 -
