Generic
Showing 913–960 of 6509 results
-
Multi Layer Ceramic Capacitors (MLCC)
100nF 0603 Surface Mount Multilayer Ceramic Capacitor (Pack of 40)
Multi Layer Ceramic Capacitors (MLCC)100nF 0603 Surface Mount Multilayer Ceramic Capacitor (Pack of 40)
SKU:- Capacitance: 100 nF
- Voltage: 50V
- Mounting type: SMD/SMT
- Operating temperature: -55ºC to 125ºC
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen Free compliant
SKU: n/a -
-
-
Linear Actuators
Linear Actuator Stroke Length 100MM,7mm/S,1500N,12V
SKU:- Permanent magnet DC motor drive: Voltage 12VDC
- Self Locking Force: 1500N
- Working temperature: -20ºC to +63ºC
- Aluminium frame and extension tube
- Compact Design
- Built in Limit Switch
- Low Noise
- Moisture-proof Surface
- Long life: A service life of more than 50000 times.
SKU: n/a -
-
Relay Modules
12V 4 Channel Relay Module
SKU:- 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Both controlled by 12V and 5V input Voltage.
- Equipped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low).
- Indication LED’s for Relay output status.
SKU: n/a -
3D Printer Motor Drivers
DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
3D Printer Motor DriversDM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
SKU:- Â Maximum current: 7.2A, resolution: 0.1A
- Â Impulse response frequency: 200KHz
- Â DC power supply
- Â The input voltage range: 20-50 VDC.
- Â Power supply is greater than 200W. Recommend 20-50 VDC
-  Operating Temperature: -10℃~45℃
SKU: n/a -
-
Boost Converter
2.8V-5.5V to ±12V DC Conversion Power Module
SKU:- Product: DC Conversion Power Module
- Input Voltage Range:2.8V-5.5V
- Output Voltage:+/-12V (V +:+12V;V-:-12V)
- Output Current:+12V stable output current capability of 50mA,-12V stable output current capability 30mA,almost meet all ADC, DAC and amplifier applications
- Size:2.4×1.2cm
SKU: n/a -
Audio Amplifier Module
DC12-24V TPA3116D2 2.1 Channel Digital Subwoofer Power Amplifier Board
SKU:- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- Powered by DC 12-24V, wide input voltage.
- User can adjust the volume by themselves easily.
- Applicable speaker impedance: 4-8 ohm.
SKU: n/a -
Gears
75pcs. Gears Assorted Kit for DIY Robotics and Household Repair
SKU:These gears are used in laboratories, science education, and DIY models and RC-airplane/helicopter repair, as well as many household repairs like old music system etc. its a great toolkit for promoting DIY abilities, improving children’s, teen’s hands-on skills and divergent thinking.
SKU: n/a -
-
-
-
Solenoids and Electromagnets
DC 24V Solenoid Cabinet Door Lock
SKU:- Holding force: 0.25kg
- Energized forms: intermittent
- Unlocking time: 1S
- Dimensions: 54 x 42 x 28 mm (LxWxH)
- High quality ultra-compact electric lock.
- Rustproof, durable, safe, convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
SKU: n/a -
Resistors Kit
Orange New 1500PCS 75 kinds specifications × 20PCS 1/4W Metal Film Resistor Pack Error 1% Common Component Package
Resistors KitOrange New 1500PCS 75 kinds specifications × 20PCS 1/4W Metal Film Resistor Pack Error 1% Common Component Package
SKU:- 1/4W Metal Film Resistor Pack Error 1% Common Component Package. This is a great assortment for front ends and low power applications.
- These resistors are typical axial-lead metal film resistors, which have much better temperature stability than their carbon equivalents,
- Lower noise and are generally better for high frequency or radio frequency applications.
- Each bundle is labeled with the resistance value and packaged in Strip which easy to tear which make your work easier
SKU: n/a -
-
JR Servo cable
SafeConnect Twisted 15CM 22AWG Servo Lead Extension (JR) Cable with Self Locking Hook
SKU:- High-Quality cable
- One male and one female connector.
- Twisted 15 cm Servo Lead Extention (JR)
- Quality wire and connectors used.
- Great for larger planes with servos that experience high loads.
SKU: n/a -
TowerPro and Other Servo Motors
TowerPro MG945 Digital High Speed Servo Motor – Standard Quality
SKU:- Stall torque: 10kg/cm (4.8v); 12kg/cm (6v)
- Operating voltage: 4.8 ~ 6.6v
- Temperature range: 0- 55deg
- Gear Type: Metal gear
- Dead band width: 1us
- servo wire length: 32cm
- Servo Plug: JR (Fits JR and Futaba)
SKU: n/a -
Digital Voltage, Current and Frequency Meter
Red Two-Wire 0.56 Inch DC5V-120V DC Digital Display Voltmeter For Car Bicycle Motorcycle
Digital Voltage, Current and Frequency MeterRed Two-Wire 0.56 Inch DC5V-120V DC Digital Display Voltmeter For Car Bicycle Motorcycle
SKU:- Voltage Measuring Range: 0 to 200 VDC
- It is a 2-wire display.
- LED Color: Red
- Current Consumption: Less than 20mA, generally 5-15mA
- Accuracy: 0.1 V.
- Refresh Speed: 300mS/time.
SKU: n/a -
Raspberry Pi Accessories
Double Fans Radiator for Raspberry Pi 3B+/4B
SKU:- Type: Raspberry 4B Aluminum Alloy Metal Heat Sink
- Material: Black Aluminum Alloy Metal
- Compatible For：Raspberry all Variant of PI 3B and 4B Model B
- Open case design with Daul Fans for Fast Heat dissipation.
- All ports and slots of the case can match with Raspberry Pi 4 Model B perfectly
SKU: n/a -
Other Metal Geared Motors
30RPM 12V Low Noise Dc Motor With Metal Gears – Grade A
SKU:- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 30 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 5.7
- Stall Torque(kg-cm): 18
SKU: n/a -
-
3D Printer Extruder Kit
All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle
3D Printer Extruder KitAll complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle
SKU:This All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle contains the same signature high-temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. This kit contains the thermistor, heater block, 0.2 mm Nozzle, sleeving, cooling fan with holder.
SKU: n/a -
-
Cooling Fans
DC 24V 5015 Hydraulic Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
SKU:- 45mm Radial Cooling fan.
- 24V 2-point Pin DC
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: n/a -
-