Generic
Showing 817–864 of 7168 results
-
-
-
Other ESP WIFI Modules
ESP32-WROOM-32 16M 128Mbit Flash WiFi Bluetooth Module
SKU: 975742- ESP32-D0WD core
- Supports multiple external QSPI flash and SRAM chips
- 32Mbits 3.3V SPI flash
- 802.11 b/g/n (802.11n up to 150Mbps) Wi-Fi protocol
- Bluetooth v4.2 BR/EDR and BLE
- SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, and IR module interfaces
- Hall sensor
SKU: 975742 -
-
-
-
GPS Modules
25x25x8mm 28db High Gain 5cm Length Built-in Ceramic Active GPS Antenna for NEO-6M NEO-7M NEO-8M
GPS Modules25x25x8mm 28db High Gain 5cm Length Built-in Ceramic Active GPS Antenna for NEO-6M NEO-7M NEO-8M
SKU: 1150670- Product: ceramic antenna cable
- Frequency: 1575.42MHz ± 4 MHz
- Antenna gain: 28dB
- Operating temperature: -45 ~ +85
- Polarization: right-hand circular polarization
- Interference suppression: 30dB ± 100MHz
- Weight: 15g
SKU: 1150670 -
-
Battery Chargers, Battery Charging Boards
DC 5V Qi Standard Micro USB Input PCBA Circuit Board With Coil for Wireless Phone Charging (Transmitter)
Battery Chargers, Battery Charging BoardsDC 5V Qi Standard Micro USB Input PCBA Circuit Board With Coil for Wireless Phone Charging (Transmitter)
SKU: 766343- Plug and Play Module
- Micro-USB B type input
- LED Status Indicator
- Input voltage: DC5V
- Input current: 2A-1.5A
- Charging voltage: 5V
- Charging current: 1A-1.5A
- Charging power: 10W
SKU: 766343 -
-
-
-
-
Light Dependent Resistors (LDR)
12mm GL12528 Light Sensitive Photoresistor LDR (2Pcs)
SKU: 611822- Diameter: 12 mm
- No. of pins: 2
- Type of mounting: PCB Through Hole
- Maximum Operating Temperature: +70˚C (Approx.)
- Dark resistance: 1-20MΩ
- Spectral peak: 560nm
- Maximum voltage: 250 VDC
- Maximum wattage: 200 mW
- Light resistance (10 Lux): 10-20 KΩ
- Dark resistance: 2 MΩ
- Resistance illumination: 3
- Response time: 20ms (Rise), 30ms (Down)
SKU: 611822 -
-
-
PVC wire
5 Meter UL1007 28AWG PVC Electronic Wire (Red)
SKU: 528364The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528364 -
RGB LED Strips and Drivers
WS2812B 4×4 RGB LED Module
SKU: 975858- Supply Voltage: DC 4-7V.
- LED driver chip: WS2812B
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
SKU: 975858 -
PIR / IR and Optical Sensor
Switch Infrared Beam Photoelectric Sensor Photocell E3JK-5DM1 DC12-24V Detecting Distance 5M
PIR / IR and Optical SensorSwitch Infrared Beam Photoelectric Sensor Photocell E3JK-5DM1 DC12-24V Detecting Distance 5M
SKU: 975818- Detection method: on-beam
- Detection distance: 5 m ± 10%
- Detecting objects: opaque objects
- Working voltage: AC and DC universal 12~24v
- Output mode: AC and DC universal five-wire relay output, normally open + normally closed
- Housing material: ABS housing
SKU: 975818 -
-
-
-
-
-
-
Shield for Arduino
Data Logger module Logging Shield data Recorder Shield
SKU: 12191- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.
- Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.
- Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.
- The onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
- A dedicated and well-designed data logging shield for Arduino.
SKU: 12191 -
Audio Amplifier Module
PAM8406 Digital Amplifier Module With Volume Control Potentiometer 5Wx2 Stereo
Audio Amplifier ModulePAM8406 Digital Amplifier Module With Volume Control Potentiometer 5Wx2 Stereo
SKU: 398264PAM8406 Digital Amplifier Module With Volume Control Potentiometer is an excellent noise suppression module. If you don’t receive input audio, you will not hear any noise on your ears.
SKU: 398264 -
