Generic
Showing 673–720 of 7162 results
-
-
12 to 16 AWG
High Quality Ultra Flexible 16AWG Silicone Wire – black
SKU: R179510- Rated Voltage: 600V
- Rated Temperature: -60°C~+200°C
- Conductor: Tinned Copper
- Conductor construction: 252/0.08
- Insulation: Silicone Rubber
- Length: 650 m
- Note : 1 Qty = 1 Meter. The standard roll length is 650 meters
- Cable length will be continuous as per your ordered Qty.
SKU: R179510 -
Boards Compatible with Arduino
Atmega16U2 Mega 2560 R3 Improved Version CH340G + Cable for Arduino Mega 2560 + transparent acrylic case for Arduino Mega 2560
Boards Compatible with ArduinoAtmega16U2 Mega 2560 R3 Improved Version CH340G + Cable for Arduino Mega 2560 + transparent acrylic case for Arduino Mega 2560
SKU: 48077- Programmer: CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by bootloader
SKU: 48077 -
-
-
Battery Pack Accessories & Holders
3 x 21700 Battery Holder with 21.2MM Bore Diameter
SKU: 1187462- Model: 21700 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 21.2MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187462 -
Boost Converter
120W 12-32V to 35-60V 6A DC-DC Boost Converter Module
SKU: 835760- Input voltage :12-32V
- Output voltage:35-60V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
SKU: 835760 -
IoT and Wireless on Sale, Timing Belt and Pulley
GT2-6mm Belt Width 60 teeth 5mm Bore Aluminium Timing Pulley
-21%IoT and Wireless on Sale, Timing Belt and PulleyGT2-6mm Belt Width 60 teeth 5mm Bore Aluminium Timing Pulley
SKU: 699546- No. of teeth: 60
- Bore Diameter(mm): 5
- Outer Diameter(mm): 44
- High Quality Aluminium
- Excellently Machined
- Durable and practical
- Minimizes the chance of the belt slipping
SKU: 699546 -
Segment Displays
MAX7219 Digital Tube Display Module Control Module
SKU: 408553The MAX7219 has integrates a convenient four wire serial interface that can be used to all micro-controller, microprocessor. Each on-chip data can be addressed in the update without rewriting all display, and also allows you to select each data encoding or no-coding.
SKU: 408553 -
-
-
Raspberry Pi Accessories
Ultra-thin Raspberry PI Routing Chip Radiator with Thermal Adhesive Size: 30x40x5MM
Raspberry Pi AccessoriesUltra-thin Raspberry PI Routing Chip Radiator with Thermal Adhesive Size: 30x40x5MM
SKU: 1150788- Product: Routing Chip Radiator
- Material: aluminum
- Color: Black
- Teeth Number: 7 rows and 14 columns
- Compatible with most Raspberry Pi cases
- Suitable for Auxiliary heat for Raspberry pi 2 model B/Raspberry Pi B+.
SKU: 1150788 -
-
-
-
Boards Compatible with Arduino
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
SKU: 4657- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 4657 -
USB Interface Module
RS422 to TTL Power Supply Converter Board
SKU: 815869- RS422 interface, two-way communication. B Y Z A ultra far transmission 1000 meters
- The module has ESD 15KV protection.
- Onboard to increase the limit of 10 ohms current limiting current protection.
- Module with TVS diode. Anti lightning, peak voltage.
- The module has 120-ohm termination resistors, which can effectively reduce the interference of long-range communication.
SKU: 815869 -
-
-
-
Straight Type DC BO Motors
110 RPM Half Metal Gear BO Motor – Straight
SKU: 766342- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~6
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 110 RPM
- Rated Torque: 1 Kgcm
SKU: 766342 -
-
12 to 16 AWG
High Quality Ultra Flexible 16AWG Silicone Wire – red
SKU: R179511- Rated Voltage: 600V
- Rated Temperature: -60°C~+200°C
- Conductor: Tinned Copper
- Conductor construction: 252/0.08
- Color: Red
- Insulation: Silicone Rubber
- Length: 650 m
- Note : 1 Qty = 1 Meter. The standard roll length is 650 meters
- Cable length will be continuous as per your ordered Qty.
SKU: R179511 -
-
Battery Pack Accessories & Holders
2 x 32650 Battery Holder with 32.35MM Bore Diameter
SKU: 1187458- Model: 32650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 32.35MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187458