Generic
Showing 5953–6000 of 7191 results
-
-
-
-
Other ESP WIFI Modules
ESP32-WROVER 8M 64Mbit Flash WiFi Bluetooth Module
SKU: 975756- Wifi: 802.11 b/g/n (802.11n up to 150 Mbps)
- Frequency range 2.4 GHz ~ 2.5 GHz
- Bluetooth: v4.2 BR/EDR and BLE
- Radio: NZIF receiver with –97 dBm sensitivity, Class-1, class-2, and class-3 transmitter, AFH
- Audio: CVSD and SBC
- On-chip sensor: Hall sensor
- Integrated SPI flash: 8 MB
- Integrated PSRAM: 64 MB
SKU: 975756 -
-
Temperature & Humidity Sensor
B3950 100K NTC Thermistor Temperature Sensor 5*25mm with XH2.54 Connector with 1Meter Cable
Temperature & Humidity SensorB3950 100K NTC Thermistor Temperature Sensor 5*25mm with XH2.54 Connector with 1Meter Cable
SKU: R192607- Type: B3950 100K NTC Thermistor
- Resistance: 100K ohms at 25°C
- Connector: XH2.54 (2.54mm pitch)
- Cable Length: 1 meter
- Size: 5mm x 25mm
- Temperature Range: -40°C to 125°C
SKU: R192607 -
LORA Module
EBYTE E32-433T30D-V8 LoRa 433MHz UART IoT Long Range Wireless Transceiver Transmitter Receiver EBYTE E32-433T30D V8 Module 1W SMA Antenna
LORA ModuleEBYTE E32-433T30D-V8 LoRa 433MHz UART IoT Long Range Wireless Transceiver Transmitter Receiver EBYTE E32-433T30D V8 Module 1W SMA Antenna
SKU: R191704- Frequency: 410~441 MHz (default 433 MHz).
- Power: 21~30 dBm, up to 1W.
- Range: Up to 8 km in open air.
- Power Supply: 3.3V to 5V.
- Antenna: SMA-K.
- Buffer: 512 bytes, 58 bytes per package.
SKU: R191704 -
-
-
-
Ni-Mh | Li-po | Li-Ion Battery chargers
CN3795 MPPT Solar Photovoltaic Charging Module
SKU: R183893- MPPT Technology for optimal solar energy conversion.
- 2A charging capacity for efficient lithium battery charging.
- Easy plug-and-play setup with solar panel and lithium battery.
- Wide voltage compatibility (5V to 24V).
- Maximized solar power utilization with automatic adjustment to light intensity.
- Designed for lithium batteries.
SKU: R183893 -
-
Pressure Sensor
BMP388 Digital Atmospheric Pressure Sensor Module
SKU: R175177- Model: BMP388
- Precision: Accurate pressure sensor for altitude tracking.
- Range: 300 – 1250 hPa with ±0.5 hPa accuracy.
- Power: Low 3.4 µA consumption at 1Hz.
- Interfaces: I²C and SPI.
- Applications: Drones, wearables, and industrial systems.
SKU: R175177 -
Carbon Fiber Tubes and Rods
3K Roll-wrapped Carbon Fibre Tube (Hollow) 30mm(OD) 28mm(ID) 350mm(L)
SKU: R163752- Input Voltage: 3-14S LiPo compatible
- Adjustable Output: 6.0V, 7.2V, 8.0V, 9.2V
- Current Output: 12A continuous, 24A burst
- Efficiency: Over 90%
- Protections: Over-current, short circuit, overheat, low-voltage cutoff
- Construction: Metal housing for heat dissipation
SKU: R163752 -
Inductive Proximity Sensor
Inductive Proximity Sensor LJ24A3-10-J/EZ / R24-10A1 NO(Normal Open);Sensor Distance : (40mm +/-10)
Inductive Proximity SensorInductive Proximity Sensor LJ24A3-10-J/EZ / R24-10A1 NO(Normal Open);Sensor Distance : (40mm +/-10)
SKU: R150783- Model: LJ24A3-10-J/EZ / R24-10A1
- Operating voltage: dc 6-36v
- Output type: Normally open
- Detection object: Iron
- Detection distance: 40mm(+/-10%)
- Output Current(Max) : 400 mA
SKU: R150783 -
-
Other 3D Printer Accessories
BLTouch Expansion Module Auto Leveling Sensor for 3D Printer Board CR10 Ender-3/Ender 3 Pro Kossel
Other 3D Printer AccessoriesBLTouch Expansion Module Auto Leveling Sensor for 3D Printer Board CR10 Ender-3/Ender 3 Pro Kossel
SKU: 1611636- Compatible With: CR10 Ender-3/Ender 3 Pro Kossel
- Voltage / Current: 4.8 ~ 5.1 V
- Current Maximum (Peak): 15mA – 300mA
- PCB / Soldering: OSP / Lead Free
SKU: 1611636 -
-
-
-
