Generic
Showing 5569–5616 of 7202 results
-
-
-
Nema 17 Stepper Motors
NEMA 17 42HS40-1704 3.6-Kg-cm Stepper Motor Round Type Shaft
SKU: 1551708- Number of Phase: 2
- Step Angle: 1.8°
- Rated Voltage (V): 2.55
- Rated Current(A): 1.7A/phase
- Resistance (Ω): 1.5 Ω ± 10%/Phase
- Inductance (mH/Phase): 2.3 mH± 20%
- Shaft Diameter (mm): 5
- Holding Torque: 3.6-Kg-cm
SKU: 1551708 -
GPS Modules, IoT and Wireless on Sale
4G LTE Shield With GNSS and BLE 5.0 – Cellular Module for IoT Projects and GPS Tracking
-11%
GPS Modules, IoT and Wireless on Sale4G LTE Shield With GNSS and BLE 5.0 – Cellular Module for IoT Projects and GPS Tracking
SKU: 1535407- BLE5.0 support with onboard PCB antenna.
- Worldwide 4G/3G/2G communication coverage. Supports VoLTE.
- GNSS supporting GPS, BeiDou, GLONASS, LBS positioning.
- Supports mail, TCP/ IP/ IPV4/ V6 Multi-PDP, MT PDP, and FTP/ FTPS/ HTTP /HTTPS /MQTT/ DNS.
- Firmware update via USB/FOTA.
- Can be powered through USB +5V ± 5%
- Four-layer PCB for good RF performance, long range, lower power
SKU: 1535407 -
-
-
-
-
Stepper Motor Drivers
MKS SBASE V1.3 32-bit Open Source Smoothieboard
SKU: 766364- 32bit 100M Cortex-M3 MCU-LPC 1768
- High-performance
- Support highly modular open source firmware Smoothieware
- Easy for secondary development
- Support network function, then proceed remote control via IE Explorer.
SKU: 766364 -
USB Interface Module
CJMCU9813 Full Color LED RGB I2C Communication Drive Control Module
SKU: 421235- IC input voltage: 5V-6.5V.
- Built-in LDO: 4.5V regulator output.
- Three-way drive: each drives current 0-45ma.
- Built-in ring oscillator(1.2MHZ) to support ongoing FREE-RUN modulation output.
- Maximum clock frequency: 15MHZ.
SKU: 421235 -
USB Interface Module
Programmable Microprocessors Serial Interface Module AD9833
SKU: R175137- Waveforms: Sinusoidal, triangular, square.
- Resolution: 0.1 Hz (25 MHz) or 0.004 Hz (1 MHz).
- Interface: Compatible with DSPs/microcontrollers (up to 40 MHz).
- Supply: 2.3 V to 5.5 V.
- Low Power: SLEEP mode
SKU: R175137 -
Temperature & Humidity Sensor
TI HDC1080 DMBR Humidity Sensors I2C,+/- 2 %
SKU: R155013- Accuracy: ±2% RH, ±0.2°C temperature.
- Low Power: 100 nA sleep mode.
- Interface: I²C for easy integration.
- Pre-calibrated: No additional calibration needed.
- Applications: Ideal for HVAC, medical devices, smart home system
SKU: R155013 -
3D Printer Nozzle, Other 3D Printer Accessories
CHT Harden Steel Nozzle for Bambu Lab
SKU: R148322- High-temperature resistance of up to 500℃
- Nozzle size: 0.4mm
- High-flow design for faster and more efficient filament extrusion
- Hardened steel construction for durability and longevity
- Resistance to wear and tear
SKU: R148322 -
Digital Voltage, Current and Frequency Meter
White USB Tester with Load, Current Detector and Voltmeter with LCD Screen Monitors Mobile Power Capacity
Digital Voltage, Current and Frequency MeterWhite USB Tester with Load, Current Detector and Voltmeter with LCD Screen Monitors Mobile Power Capacity
SKU: 1794706- Material: Plastic and Electronic Component
- Color: White
- Input Voltage: 4 -30V
- Input Current: 50 -3000mA
- Output Voltage: 4 -30V
- Output Current: 50 -3000mA
SKU: 1794706 -
-
-
Temperature & Humidity Sensor
Unwelded GY-SHT45 Digital Temperature and Humidity Sensor
SKU: 1794260- High accuracy in temperature and humidity measurements
- Digital output for easy interfacing
- Low power consumption
- I2C or SPI communication interface
- On-chip calibration data
- Small form factor for easy integration
SKU: 1794260 -
CNC Engraver Machines
CNC1419 All Metal Small Desktop Engraving/Copper Aluminum Metal CNC Engraving Machine Kit
CNC Engraver MachinesCNC1419 All Metal Small Desktop Engraving/Copper Aluminum Metal CNC Engraving Machine Kit
SKU: 1645133- Working range: 140mm * 190mm * 40mm
- Software: GRBL control
- Spindle: 775 spindle (12-36V) (24V 7000r; 36V 9000r)
- Stepper motor: 2-phase 4-wire stepper motor (1.3A 0.25N.m)
SKU: 1645133
