Generic
Showing 481–528 of 7162 results
-
-
Tactile Switches
6x6x5mm Tactile Push Button Switch (Pack of 20)
SKU: 615295- Ideal for Through-hole applications.
- Used in the fields of electronic products, household appliances and more.
-
This light touch switch is waterproof, prevent oil, anti-pollution, anti-static interference.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantling.
-
Good electrical conductivity.
SKU: 615295 -
-
-
Segment Displays
0.56 inch Red 4 Digit 7 Segment LED Display CC 12pin (2 pcs.)
SKU: 617788- Bright Red LED chip, which is made from AlGaAs on GaAs substrate
- Blackface and RED LED segments
- Type: Common cathode
- No. of Pins: 12
- Low Current Consumption
- High Brightness
- Easy to Use with PCB Mounting as well as on Breadboard
SKU: 617788 -
-
3D Printer Extruder Parts and Fans
PC4-01 Pneumatic Push for V6 Bowden Extruders 4mm tube J-Head Fitting
3D Printer Extruder Parts and FansPC4-01 Pneumatic Push for V6 Bowden Extruders 4mm tube J-Head Fitting
SKU: 921908- Inside Diameter: 4mm
- Thread Size: M10
- PTFE Tubing Compatibility: 3mm ID PTFE Tubing (for 1.75mm Filament)
- Materials: Nickel Plated Brass
- Release Method: Elliptical John Guest Fitting
SKU: 921908 -
-
-
-
PCB Adapter
Sop16 Sop28 To Dip16 Dip28 Pcb Adapter
SKU: 108195This is a SOP16/SOP28/SSOP28 to DIP16/DIP28 Adapter Board. You can change the SOP16/SOP28/SSOP28 to DIP16/DIP28 packaging. So that You need not to buy the DIP chips for prototyping especially. Just solder the SMD chips on the board and plug it into the breadboard will make you convenient to do prototyping.
SKU: 108195 -
Plastic Push Button Switch
12x12x7.3mm Tactile Push Button Switch-10Pcs.XR105 F3L
SKU: 130212- Ideal for Through-hole applications.
- Shaft Shape: Round
- Used in the fields of electronic products, household appliances and more.
-
This light touch switch is waterproof, prevent oil, anti-pollution, anti-static interference.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantling.
-
Good electrical conductivity.
SKU: 130212 -
Relay Modules
ESP8266 ESP-01 5V WiFi Relay Module
SKU: 835798- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: 835798 -
-
Digital Voltage, Current and Frequency Meter
0.56inch 0-100V Three Wire LED Display Digital DC Voltmeter-RED
Digital Voltage, Current and Frequency Meter0.56inch 0-100V Three Wire LED Display Digital DC Voltmeter-RED
SKU: 309337- Operating Voltage: 0-100 VDC
- It is a 3-wire display.
- LED Color: RED
- Current Consumption : <40 mA
- Accuracy: 0.1 V.
- Refresh Speed : Approx 200mS/time.
- The display on Voltage: 3 V.(but not measure accurately up to 3.6V).
SKU: 309337 -
IMU, Accelerometer, Magnetometer & Gyroscope
ADXL335 Module 3-axis Analog Output Accelerometer
SKU: 12231- Onboard LDO Voltage regulator
- Can be interfaced with 3V3 or 5V Microcontroller.
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high current electronics
- Power LED
SKU: 12231 -
RFID card, Tags & Reader
PN532 NFC RFID Read / Write Module V3 Kit
SKU: 699611- Module Size: 42.7mm x 40.4mm x 4mm
- Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes
- Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version
- Built in PCB Antenna, with 5cm~7cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as RFID reader/writer
- Work as 1443-A card or a virtual card
SKU: 699611 -
-
-
Rotary Potentiometers
10kΩ 0.2W 6 Pin 2 Gang Rotary Carbon Potentiometer (15mm)
SKU: 872025- Potentiometer Type: Rotary
- Maximum Resistance: 10kΩ
- Number of Gangs: 2
- Number of Turns: 1
- Power Rating: 0.2W
- Electrical Taper: Linear
- Element Material: Carbon
- Mounting Type: Panel Mount
- Termination Style: PC Pin
- Shaft Length: 15mm
- Shaft Diameter: 6.35 mm
- Tolerance: ±20%
- Actuator Type: Knurled Shaft
SKU: 872025 -
Signal Generator Module & Oscilloscopes
GY-9833 AD9833 Programmable Sine Square Wave DDS Signal Generator
Signal Generator Module & OscilloscopesGY-9833 AD9833 Programmable Sine Square Wave DDS Signal Generator
SKU: 699521- 2.3 V to 5.5 V power supply
- Digitally programmable frequency and phase
- 0 MHz to 12.5 MHz output frequency range
- 28-bit resolution: 0.1 Hz at 25 MHz reference clock
- Sinusoidal, triangular, and square wave outputs
- 3-wire SPI interface
SKU: 699521 -
-
Plastic Push Button Switch
12x12x12mm Tactile Push Button Switch-10Pcs.
SKU: 618207- Through-hole design.
- Shaft Shape: Round
- Function: Push to ON
- High operating force (3.0N or 3.6N) suited to automotive equipment requirements
- The long life of 300,000 cycles realized despite the high operating force
- Middle stroke (1.05mm)
SKU: 618207 -
Barrel Plugs
4mm Banana Socket Jack for Banana Plug Terminal Connector(Pack of 2)
SKU: 497666- With aluminum alloy core, nickel plated, and a solid hard plastic shell.
- Suitable for 4mm banana plugs, spade terminals or a bare wire, easy to install and use.
- Ideal for speaker enclosure applications and amplifier, perfect for connecting center speakers to AV receivers.
SKU: 497666 -
Sleeves and Drag Chain
Nylon 6mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 456976- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 456976 -
-
-
-
-
3D Printer Nozzle
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.4mm (for 3D printer)
SKU: 294106Modify your 3D printer to print fine details or large parts with V6 M6 Thread Brass Nozzle range at robu.in. These nozzles are fully integrated into the ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
SKU: 294106 -
