Generic
Showing 5185–5232 of 6509 results
-
-
Thin Film Inductors
TFM252012ALMA3R3MTAA Thin Film Inductor
SKU:- By using a closed magnetic circuit structure leakage flux is minimized.
- The rated voltage of 40V is realized by design that emphasizes voltage resistance.
- Operating temperature range: –55 to +150°C (including self-temperature rise)
- Compliant with AEC-Q200
SKU: n/a -
Interfacing and USB Cables
SATA (7+6) PIN to USB 3.0 External Hard Disk Data Cable
SKU:- Product name: 0.3m USB 3.0 to SATA 7+6 Pin Adapter Cable External HDD Hard Disk Converter
- Product length: 0.3 meters/11.8″
- Plug Specifications: USB 3.0 / SATA 7+ 6pin
- Product weight: about 30g
- Wire: 24AWG+ 32AWG OD: 4.5mm
- Wire material: tinned copper
- Transmission speed: 5Gbps
SKU: n/a -
-
RF Connectors
MC002989 RF / Coaxial Cable Assembly, 3 GHz, Gold Plated, SMA Plug to SMA Plug, RG316, 50 ohm, 10 “, 255 mm
RF ConnectorsMC002989 RF / Coaxial Cable Assembly, 3 GHz, Gold Plated, SMA Plug to SMA Plug, RG316, 50 ohm, 10 “, 255 mm
SKU:- Cable Length : 255mm / 10.04″
- Connector Type A : SMA Straight Plug
- Connector Type B : SMA Straight Plug
- Cable Type : RG-316
- Impedance : 50Ω
- Frequency : 0 – 3GHz
- VSWR : ≤ 1.5@3GHz
- Return Loss : ≥ 13.979dB@3GHz
- Voltage Rating : 335V RMS
- SMA Insulation Resistance : 5,000MΩ Min.
SKU: n/a -
-
-
Raspberry Pi Hats
Raspberry Pi GPIO UART HAT / Shield V1.0
SKU:- Onboard Power Indicator Lamp
- Onboard Infrared Receiving Function
- GPIO Expansion Function:
- 16 independent GPIO with power and ground (3.3V level)
- 2 Independent SPI expansion interface and 1 I2C expansion interface
- 1 standard RS232 serial port: can directly connect with PC etc.
SKU: n/a -
-
-
Kits compatible with Arduino
ESP8266 Weather Station Kit for Arduino IDE IoT Starter
SKU:- ESP8266:CP2102 chip inside, Micro USB,4MB flash, full I/O port and wireless 802.11 supported IOT platform Arduino compatible.
- DHT11 Sensor: A digital signal output with a calibrated temperature and humidity combined sensor. The simple communication protocol greatly reduces the programming effort required
- BMP180:high-precision, small size, ultra-low power 3μA pressure sensor. Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa.Can directly through the I2C bus connected with a variety of microprocessors. Pressure range: 300 ~ 1100hPa.
SKU: n/a -
-
3D Printer Stepper Motors, Nema 11 Stepper Motors
NEMA 11-28HS32-0674-0.6-Kg-cm Round Type Shaft Stepper Motor
3D Printer Stepper Motors, Nema 11 Stepper MotorsNEMA 11-28HS32-0674-0.6-Kg-cm Round Type Shaft Stepper Motor
SKU:- Number of Phase: 2
- Step Angle: 1.8°
- Rated Voltage (V): 3.75
- Rated Current(A): 0.67
- Resistance (Ω): 5.6 Ω ± 0.1/Phase
- Inductance (mH/Phase): 3.4 mH± 20%
- Shaft Diameter (mm): 5
SKU: n/a