Generic
Showing 433–480 of 7162 results
-
-
-
Bluetooth and NRF Modules
HC-05 TTL Bluetooth Transceiver Module (Without Button)
SKU: 18596- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution
- Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes
- Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support
- Incredible small size with 3.3V input, and RoHS Compliant
- UART interface and with baud rate setup function
SKU: 18596 -
-
-
Battery Chargers, Battery Charging Boards
XH-M601 12V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power
Battery Chargers, Battery Charging BoardsXH-M601 12V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power
SKU: 1121439- Power Supply Voltage:13.8-14.8V
- Relay Operating Voltage:12.4V
- Relay Disconnect Voltage:14.8V
- Voltage Tolerance:+/-0.1V
- Voltage Detection Way: DC voltmeter
SKU: 1121439 -
Power Adapter and Cable, Power Cables and Accessories
AC 250V 15A IEC320 C14 Male Power Cord Inlet Socket
Power Adapter and Cable, Power Cables and AccessoriesAC 250V 15A IEC320 C14 Male Power Cord Inlet Socket
SKU: R182861- Plug Type : 3 Pin IEC320 C14
- Terminal Pin Size: 4.8×0.8mm
- Hole Center Distance: 36 mm
- Voltage/ Current : 15A, 250V AC
- Hole in Top Face Diameter: 3.5mm
- Fuse Ampere(Presupposed): 15A
SKU: R182861 -
Segment Displays
0.56 inch with clock Red 4 Digit 7 Segment LED Display CC 12pin
SKU: 1307988- Bright Red LED chip, which is made from AlGaAs on GaAs substrate
- Blackface and RED LED segments
- Type: Common cathode
- No. of Pins: 12
- Low Current Consumption
- High Brightness
- Easy to Use with PCB Mounting as well as on Breadboard
SKU: 1307988 -
3D Printer Extruder Parts and Fans
PC4-M6 Pneumatic Push in Bowden Extruder for 4mm J-Head Fitting
SKU: 921906- Inside Diameter: 4mm
- Thread Size: M6
- PTFE Tubing Compatibility: 3mm ID PTFE Tubing (for 1.75mm Filament)
- Materials: Nickel Plated Brass
- Release Method: Elliptical John Guest Fitting
SKU: 921906 -
-
-
-
-
-
-
Lead Screw and Nut
500mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
Lead Screw and Nut500mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
SKU: 12041- Lead Screw Material: 304 Stainless Steel.
- Length: 500mm.
- Diameter: 8mm.
- 4 Start Lead Screw
- Brass Nut Size: 22(Body Diameter) x 15 mm.
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
SKU: 12041 -
-
Drivers & Interfaces IC
L298N Multiwatt-15V Dual Full-Bridge Driver
SKU: 162095- Low saturation voltage
- Over temperature protection
- High noise immunity
- Applications: Motor Drive & Control
- Operating Supply Voltage Up To 46 V
- Total Dc Current Up To 4 A
- Low Saturation Voltage
- Overtemperature Protection
SKU: 162095 -
-
-
Solenoids and Electromagnets
DC 24V KK-P20/15 3KG Lifting Solenoid Electromagnet
SKU: 867162- Operating Voltage: 24V DC
- Lifting Capacity: 3 KG
- Size (D x L): 20x 15 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: 867162 -
Audio Amplifier Module
TDA2030A 6-12V 18W Audio Amplifier Module
SKU: 815861- Operating voltage: 6 to 12V DC
- Onboard TDA2030A Audio amplifier IC
- Mono channel 18W Power amplifier circuit design
- Onboard horn socket
- 10 k adjustable resistance to adjust the volume of the amplification
- Onboard power indicator light
- Chip has lead to the main pin, can directly input the audio signal
SKU: 815861 -
-
-
-
Metal Push Button Switch
12mm 12V Ring Light Self-Lock Non-Momentary Metal Push-button Switch-Red Light
Metal Push Button Switch12mm 12V Ring Light Self-Lock Non-Momentary Metal Push-button Switch-Red Light
SKU: 130265- Stainless steel material for long-term use
- Inbuilt Colorful Ring illumination LED
- Available in Various LED Color
- Bright daylight LEDs
- Single pole push to make and Push to break Function
- Front and rear panel seal to IP67 & TVS protection
- Rubber ring and hexagon nut to fix, Waterproof and Dustproof
SKU: 130265 -
Battery Pack Accessories & Holders
3 X 6 18650 Battery, Holder with 18.5MM, Bore Diameter
SKU: 1121243- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1121243 -
-
-
-
-
-
Generic Mini Pumps
15L High Flow 555 Vacuum Pump, Air Pump, Oxygen Pump, Fish Tank Folding
SKU: 76749- Operating voltage: 12 VDC
- Rated current: 800mA
- Inflation time: <6 seconds (from 0 to 300 mmHg in a 1000CC closed container)
- Minimum pressure: >400 mmHg (53.33KPa)
- Maximum pressure: 750.062mmHg (100KPa)
- Hermeticity: <5mmHg (from 1000mmHg in 1000CC container min), airtight only for inflation
- Flow rate: >15 L/Min
- Noise: <55dB (test at 30cm distance)
- Lifetime: 100,000 cycles tested
SKU: 76749 -
-
Logic IC
MPU 6050 QFN-24 3-Axis Gyro/Accelerometer IC
SKU: 162123- User-programmable digital filters for gyroscope, accelerometer, and temp sensor
- Digital-output temperature sensor
- 9-Axis MotionFusion by the on-chip digital motion processor (DMP)
- Auxiliary master I2C bus for reading data from external sensors
- Minimal cross-axis sensitivity between the accelerometer and gyroscope axes
- MEMS structure hermetically sealed and bonded at the wafer level
- 10,000 g shock tolerant
- 400kHz fast mode I2C for communicating with all registers
SKU: 162123 -
Battery Pack Accessories & Holders
2 x 21700 Battery Holder with 21.2MM Bore Diameter
SKU: 1187455- Model: 21700 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 21.2MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187455
