Cytron
Showing 49–96 of 106 results
-
Cytron Motor Drivers
Cytron ESP8266 WiFi Shield V2.0 W/ Micro SD Card Slot For Arduino Uno
SKU: 43298- Basically, Rev2.0 utilize WROOM-02 instead of ESP8266-12 as the WiFi module.
- Separate 3.3V voltage regulator for ESP8266-12 WROOM-02 module, 500mA max output.
- Each and every board is preassembled and tested before it is being shipped out to you.
- 802.11 b/g/n.
- Support Wi-Fi Direct (P2P), soft-AP.
- Integrated TCP/IP protocol stack.
SKU: 43298 -
PIC Development board
Cytron 40 pins PIC Start-Up Kit SK40C
SKU: 10095-
ICSP connector for UIC00B -simple and fast method to load program.
-
Perfect fit for 40 pins PIC16F and PIC18F.
-
Operating Voltage Range: 7V – 15VDC
-
2 x programmable switch.
-
2 x LED indicator.
-
Exchangeable Crystal.
-
Existing pad for 16 x 2 characters LCD display.
-
UART connection to interface with other controller or even computer.
SKU: 10095 -
-
Cytron Motor Drivers
Cytron Dual channel 10A Motor Driver UNO Robot Controller
SKU: 49866- Onboard 1A (maximum) 5V voltage regulator.
- Onboard 500mA (maximum) 3.3V voltage regulator.
- 0-5V digital outputs with 3.3V compatible inputs.
- 14 Digital I/O Pins (6 PWM outputs).(4 pin used for Motor driver)
- 6 Analog Inputs (Can be digital I/O too).
- Maximum current up to 10A continuous and 30A Peak.
- ISP 6-pin Header.
- 32k Flash Memory.
- 16MHz Clock Speed.
- R3 Shield Compatible.
SKU: 49866 -
-
Cytron DC Planetary Geared Motors, Motor/Drivers & Accessories on Sale
Planetary DC Geared Motor 170 RPM 27N-CM 12V IG32E-35K
-14%
Cytron DC Planetary Geared Motors, Motor/Drivers & Accessories on SalePlanetary DC Geared Motor 170 RPM 27N-CM 12V IG32E-35K
SKU: 7968- Brand Name: Cytron
- Voltage: 12VDC
- Rated Torque: ~2.753 kg.cm (270 mN.m)
- Rated Speed: 170 RPM
- Rated Current: 900mA
- Rated Power: 7W
- Gear ratio: 35:1
- Encoder: 245 PPR
SKU: 7968 -
Cytron Motor Drivers
Cytron Driver HAT-MDD10
SKU: 29670- Support motor voltage ranges from 6VDC to 24VDC.
- Onboard the test button for manual control of the motor.
- Every channel output built with LED indicator.
- Current limiting at 30A.
- Operating Voltage(VDC): 6 to 24
- Peak Current (A): 30 (10 seconds)
- Continuous Current (A): 10
- No. of Channels: 2
- Operating Modes: PWM (Lock-Antiphase and Sign-Magnitude): Yes, UART: No, Analog:No, RC Servo Signal: No
SKU: 29670 -
-
Shield for Arduino
Cytron G15 Shield
SKU: 6265-
Arduino reset button
-
4 x G15 Cube Servo ports.
-
External power port for a servo with polarity protection
-
Stackable I/O header pin
-
Selectable digital pins for the control pin with mini jumpers
-
TX and RX indicator LEDs to show communication activities, only on Rev2.0.
-
Selectable Serial pins, Either hardware serial or software serial via mini jumpers, only on Rev2.0
SKU: 6265 -
-
-
-
-
-
-
PIC Programmer
ICSP Programmer Socket – UIC-S
SKU: 10048-
No external power needed
-
Power Indicator LED on board
-
Fit perfectly with UIC00A and UIC00B
-
Support 18-pin, 28-pin, and 40-pin 8-bit PIC microcontroller.
-
Selector to program 18-pin or 28-pin&40-pin PIC
-
Come with 40-pin ZIF socket for ease of plug and unplug of PIC
SKU: 10048 -
-
Shield for Arduino
Cytron XBee Shield
SKU: 7981-
Mounts directly onto your Arduino
-
DIN and DOUT pins of XBee can be connected to either the USB’s UART pins or another digital pin on the Arduino (D0, D1, D2, D3, D8, D9, D10, D11)
-
3.3V power regulation and proper level shifting on-board communication between 5V and 3.3V
-
Extra 0.1″ spaced prototyping holes
-
Reset button brought out to shield
-
Power, DIN, DOUT, RSSI, and DIO5 indicator LEDs
SKU: 7981 -
-
Cytron Motor Drivers
Cytron MDS160A SmartDrive160 160AMP Dc Motor Driver (Peak 190Amp)
SKU: 2784- Bi-directional control for a single brushed DC motor.
- Support input voltage from 8V to 28V.
- Maximum current up to 190A peak (1 minute), 175A (2 minutes) or 160A (continuously).
- 16 KHz switching frequency for quiet operation.
- LiPo battery low voltage warning.
- Thermal protection.
SKU: 2784 -
Cytron Motor Drivers
Cytron Uno Board ATmega328 Microcontroller (Arduino Compatible)
SKU: 766269- A better version of Arduino Uno
- SMD ATmega328 microcontroller with Optiboot (UNO) Bootloader
- USB Programming Facilitated by the Ubiquitous FTDI FT231X (more stable)
- Input voltage: DC7-15V
- 14 Digital I/O Pins (6 PWM outputs)
SKU: 766269 -
Shield for Arduino
PS2 Controller Starter Kit
SKU: 7438- Stable 5V powered, low current consumption, less than 150mA.
- 1 standard PS2 controller socket.
- Communicate with host microcontroller through 5V TTL UART.
- Simple inquiry command and button status feedback for the host process.
- Vibrator motor is controllable.
- Wired or wireless PS2 controller is fully compatible.
- A small LED as the indicator for communication between SKPS and PS2 controller.
SKU: 7438 -
PIC Development board
16-bit or 32-bit PIC Start-Up Kit – SK1632
SKU: 10062-
Input voltage range: 7V to 15VDC.
-
1 x Programmable push button (digital input, connected to A1)
-
1 x Programmable LED (active high, connected to A0)
-
Replaceable Crystal (default 8MHz)
-
Ready pads for 2×8 Character parallel interface LCD
-
USB micro B socket for PIC that supports USB peripheral
-
USB bootloader may be utilized if needed
SKU: 10062 -
-
Robot Kits and Parts
Cytron PikaBot – Maker UNO Smart Car Kit
SKU: 718386- Controller: Maker UNO
- No soldering needed, only requires to connect jumper wires
- Motor Driver: Maker Drive dual-channel DC brush motor driver
- Driven by two TT motor with pre-solder wires
- Power both controller and motor with 4 x AA battery, with battery holder too
- Comes with IR Line Sensor module, for line following
SKU: 718386 -
PIC Programmer
ICSP Universal Socket
SKU: 10061To ease user, Cytron has created this UIC-A so that user can use any programmer regardless of the development board. For example, a development board which uses PICkit2’s socket standard, which is 6-way header pins can be programmed with UIC000B by using the UIC-A!
SKU: 10061 -
Brushed / Brushless DC motor Driver
Cytron Smartdrive40 40Amp Dc Motor Driver (Peak 80Amp) Mds40A
SKU: 2780- Bi-directional control for a single brushed DC motor.
- Support motor from 7V to 25V.
- Maximum current up to 80A peak (1 second), 40A (5 minutes) or 30A (> 20 minutes) continuously.
- 16 KHz switching frequency for quiet operation.
- Reverse polarity protection.
- LiPo battery low voltage warning.
- Thermal protection.
- Current limiting base on temperature.
SKU: 2780 -
-
IoT Development Boards
NANO32 ESP32 IoT Development Board
SKU: 24473-
ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
-
40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
-
4MB Flash (32MBit)
-
FTDI231 for the USB to Serial communication
-
Auto-reset for automatic flash of new program
-
On board 3.3V, 0.5A LDO, tested to work upto 1A
-
2.5dBi Peak Gain, 0.5dBi averange gain antenna
SKU: 24473 -
-
PIC Development board
CIKU PIC PIC18F4550 based Arduino form factor starter kit
SKU: 10107-
Comes with pre-programmed PIC18F4550 with USB bootloader.
-
PIC18F4550 running at 48MHz (after PLL with 10MHz external crystal).
-
Power via USB or external DC adapter (7 – 12V).
-
On board 5V 800mA (Max 1A) voltage regulator.
-
On board 3.3V 500mA (Max 500mA) voltage regulator.
-
USB mini-B receptor for USB connection.
-
20 digital I/O pins.
-
6 analog input pin.
-
2 PWM output pin.
SKU: 10107 -
-
PIC Development board
28 Pins PIC Start-up Kit – SK28A
SKU: 10080-
Industrial grade PCB.
-
Every board is being tested before it is shipped out.
-
Compact platform and breadboard-friendly
-
Suitable for hobbyists and expert.
-
Save development and soldering time.
-
Turn pin for crystal comes with 20MHz Crystal by default, the user may use crystal at various frequencies
-
Mini USB socket on board may use PIC18F2550 for USB device development, example USB Bootloader.
-
2×8 Character Parallel LCD pad ready (optional).
SKU: 10080 -
-
Shield for Arduino
Cytron Easy MP3 Shield
SKU: 7982-
Onboard high-quality MP3 decoder.
-
Onboard dual channel/Stereo 3W differential audio amplifier for an external speaker.
- A MicroSD status LED.
-
Onboard stereo 3.5mm audio jack socket for earphones.
-
Onboard microSD socket for MP3 audio files storage.
-
The interface from Arduino, UART, selectable to use soft serial.
-
Stackable side headers.
- Supply voltage: 5V.
SKU: 7982 -
-
PIC Development board
40 pins PIC Start-Up Kit Combo 1 – SK40C PIC16F877A (SK40C1)
SKU: 10097-
ICSP connector for UIC00B -simple and fast method to load program.
-
Perfect fit for 40 pins PIC16F and PIC18F.
-
2 x programmable switch.
-
2 x LED indicator.
-
Exchangeable Crystal.
-
Existing pad for 16 x 2 characters LCD display.
SKU: 10097 -
-
PIC Development board
40 pins PIC Start-Up Kit Combo 2 SK40C + PIC18F4550 (SK40C2)
SKU: 10105-
ICSP connector for UIC00B -simple and fast method to load program.
-
Perfect fit for 40 pins PIC16F and PIC18F.
-
2 x programmable switch.
-
2 x LED indicator.
-
Exchangeable Crystal.
-
Existing pad for 16 x 2 characters LCD display.
-
UART connection to interface with other controller or even computer.
-
USB on board for certain PIC18F.
SKU: 10105 -
-
PIC Development board
40 Pins dsPIC Start-Up Kit – SKDS40A
SKU: 10086-
ICSP connector for UIC00A /B-simple and fast method to load program.
-
Perfectly fit for 40 pins dsPIC (16-bit), NOT for the 40-pins 8-bit PIC.
-
2 x programmable switch.
-
2 x programmable LED indicator.
-
Changeable Crystal – default 10MHz.
-
Existing pad for 16 x 2 characters LCD display.
SKU: 10086 -
-
-
PIC Development board
18 Pins PIC Start-up Kit – SK18B
SKU: 10064-
Compact, powerful, flexible and robust start-up platform.
-
No extra components required for the PIC to function.
-
No more frustrated work plugging PIC out and back for re-programming.
-
Perfectly fit for 18 pins PIC16F MCU.
-
With UIC00A, the program can be loaded in less than 4 seconds.
-
On/Off switch for main power
-
DC adaptor socket as power input
SKU: 10064 -
-
Shield for Arduino
Cytron 8 Channels RC Servo Controller Shield for Arduino
SKU: R158225- Interface: UC00A/UC00C/UART for easier communication
- Peak current: 5A
- Continuous current: 4A
- Channel Control: Control up to 8 channels independently
- Voltage Range: Operates with servo motors from 7V to 25V
SKU: R158225 -
Cytron Motor Drivers
Cytron Maker UNO RP2040 : Simplifying Robotics with Raspberry Pi RP2040
SKU: R110639- Raspberry Pi RP2040 with dual-core Arm Cortex-M0+ processor.
- 264 KB RAM for efficient processing.
- Flash Memory 2 MB for storing programs and data.
- USB-C (5V) and LiPo/Li-Ion battery support.
6x Grove Ports and 1x Maker Port for versatile interfacing. - 4x dedicated ports for seamless servo motor integration.
SKU: R110639 -
USB Interface Module
USB PIC Programmer – UP00B
SKU: 10109- USB powered, no extra power needed to load program
- Two ZIF sockets (20 pins and 40 pins) to ease the program loading process
- Support most 8pin, 18pin, 28pin and 40pin PDIP 8 bit PIC MCU
- Support Windows XP, Vista, 7 (32 and 64-bits)
- Support Intel and AMD based system
- Support Laptop and desktop PC
SKU: 10109 -
-
DIY Learning and Robot Kits
Cytron ZOOM:BIT Robot Car Kit for micro:bit (without micro:bit)
SKU: R191701- Easy programming via Microsoft MakeCode (Blocks, JavaScript, Python).
- Auto-calibrating Maker Line Sensor for line-following activities.
- Dual DC motor terminals with quick-test buttons.
- Four servo motor ports for versatile movement control.
SKU: R191701 -
-
BBC MicroBit and Expansion Boards
Cytron REKA:BIT (without micro:bit) – Simplifying Robotics with micro:bit
BBC MicroBit and Expansion BoardsCytron REKA:BIT (without micro:bit) – Simplifying Robotics with micro:bit
SKU: R191700- Compact micro:bit expansion board for learning and projects.
- Supports MakeCode with block, JavaScript, and Python modes.
- Built-in multi-tasking co-processor for efficient control.
- Handles up to 4 servo motors, 2 DC motors, and 2 RGB LEDs.
SKU: R191700 -
Raspberry Pi Hats
Cytron Maker pHAT-Simplifying Raspberry Pi for education
SKU: R191691- Enables headless setup for easy Raspberry Pi access.
- Onboard LEDs, buttons, and buzzer simplify learning electronics.
- Pre-labeled GPIO pins for hassle-free connections.
- Pushbutton feature ensures safe Raspberry Pi shutdown.
SKU: R191691 -
DIY Learning and Robot Kits
Cytron Maker UNO X Learning Box
SKU: R191693- Designed for beginners in Arduino and digital making .
- User-friendly materials crafted by a non-technical creator.
- Focus on immediate results to inspire learning.
- Ideal for students and teachers without prior coding or electronics experience.
SKU: R191693
